2026
R. H. Deo, J. Liu, T. Siebert, M. Böl
Multi-phase field approach for modelling fracture propagation in multi-component tissues
Journal of the Mechanics and Physics of Solids, 106399, (2026) [Link]
M. R. Kardooni, J. Liu, Z. Kozanecka, R. Krull, M. Böl
On a new approach to describing soft pellets of filamentous cultivated in shake flasks under turbulent flow conditions
Biochemical Engineering Journal, 225, 109942, (2026) [Link]
2025
Bernd-Christian Hölscher
Voraussetzungen der Existenz frequenzunabhängiger Schalleinstrahlungsformen
Springer (2025) [Link]
O. Alalul, J. Liu, M. Böl, A. Al-Halhouli, A. Dietzel
Oocyte Biomechanics Using a Microdevice to Correlate Transients of Micro-Flow Impedance and Electrical Impedance
23rd International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers), 1307-1310, (2025) [Link]
R. Mitkus, V. Kesminas, M. Böl
Experimental investigation of sensitivity changes during encapsulation of piezoelectric composite materials
Scientific Reports, 15, 31738, (2025) [Link]
M. Borsdorf, S. Papenkort, M. Böl. T. Siebert
Biaxial determination of active and passive mechanical properties of porcine stomach smooth muscle tissue
submitted (2025)
S. Kiem, S. Papenkort, M. Borsdorf, M. Böl, T. Siebert
Influence of different preconditioning protocols on the active and passive force generation of urinary smooth muscle
submitted (2025)
C. Bremer, J. Kube, M. Sinapius, O. Völkerink, Y. Mizutani, M. Böl
Pultruded CFRP sensors for structural stiffening and linear piezoresistive strain sensing in GFRP
Composites Part C: Open Access, 18, 100681 (2025) [Link]
M. Böl, K. Leichsenring, S. Kutschke, F. Walter, T. Siebert
Age-dependent properties of the rabbit calf musculature - relationship between mechanic and microstructure
Journal of the Mechanical Behavior of Biomedical Materials, 168, 107008, (2025) [Link]
Q. Liu, J. Liu, S. Kutschke, V. Kosmalla, D. Schürenkamp, N. Goseberg, M. Böl
Seasonal mechanical behaviour of Elymus spec. for the assessment of ecosystem services
Forces in Mechanics, 19, 100313, (2025) [Link]
S. Kiem, S. Papenkort, M. Borsdorf, M. Böl, T. Siebert
Reproducibility of smooth muscle mechanical properties in consecutive stretch and activation protocols
European Journal of Physiology, 477, 729-739, (2025) [Link]
J. Geldner, S. Papenkort, S. Kiem, M. Böl, T. Siebert
Active and passive material response of urinary bladder smooth muscle tissue in uniaxial and biaxial tensile testing
Acta Biomaterialia, 193, 255-266, (2025) [Link]
C. Krautwald, C. Schweiger, J. Liu, C. Windt, D. Schürenkamp, M. Böl, N. Goseberg
Wave-induced wake dynamics of cylinders with surrogates of marine biofouling
submitted (2025)
F. Neumann, F. Cerbe, M. Sinapius
From Material to Solution: Implementing Shape Memory Behavior of Thermoplastic Polymers in Commercial FEA Software for Structural Analysis
Journal of Manufacturing and Material Processing, 9(3), 73, (2025) [Link]
Z.Kozanecka, J.Liu, Q. Liu, H.Buch, J. Gebauer, D. Rasch, M. Böl, R. Krull
Increased labyrinthopeptin A1 production is associated with changes in oxygen supply, density and elasticity of Actinomadura namibiensis pellets
Biochemical Engineering Journal, 220, 109747, (2025) [Link]
R. Mitkus, M. Böl
On the manufacturing of potassium sodium niobate piezoceramics with low viscosity slurry via digital light processing using high refractive index monomers
The International Journal of Advanced Manufacturing Technology, 141, 3211–3223, (2025) [Link]
2024
F. Cerbe, D. Mahlstedt, M. Sinapius, C. Hühne, M. Böl
Relationship between programming stress and residual strain in FDM 4D printing
Progress in Additive Manufacturing, 9, 123-132, (2024) [Link]
J. Wiedemann, S. Mrzljak, J. Koord, C. Hühne, F. Walther
Modified cure cycles for increased fatigue performance of fiber metal laminates
Composite Structures, 351, 118631, (2024) [Link]
J. Liu, Q. Liu, S. Kutschke, V. Kosmalla, D. Schürenkamp, N. Goseberg, M. Böl
Seasonal variations in biomechanical properties of Elymus Species: Implications for Assessing Coastal Ecosystem Services
Proceedings in Applied Mathematics and Mechanics, 24, e202400088, (2024) [Link]
Q. Liu, J. Liu, Z. Kozanecka, R. Krull, M. Böl
Morphological and mechanical properties of filamentous pellets during the cultivation process
Proceedings in Applied Mathematics and Mechanics, 24, e202400089, (2024) [Link]
P. Meyer, M. Sprengholz, H. Traub, C. Hühne
Adaptive-Stiffness Characteristics of Pneumatic Rotary Actuators for Folding Wingtips
ASME 2024 Aerospace Structures, Structural Dynamics, and Materials Conference, (2024) [Link]
M. Borsdorf, S. Papenkort, M. Böl, T. Siebert
Influence of muscle packing on the three-dimensional architecture of rabbit M. plantaris
Journal of the Mechanical Behavior of Biomedical Materials, 106762, (2024) [Link]
J. Wiedemann, S. Mrzljak, C. Hühne, F. Walther
Increased accuracy of service life prediction for fiber metal laminates by consideration of the manufacturing-induced residual stress state
Proceedings of the 10th European Workshop on Structural Health Monitoring (EWSHM 2024), (2024) [Link]
M. Hoppstädter, K. Linka, E. Kuhl, M. Schmicke, M Böl
Machine learning reveals relations between brain age and mechanics
Acta Biomaterialia, 190, 362-378, (2024) [Link]
M. Böl, K. Leichsenring, S. Kohn, A. E. Ehret
The anisotropic and region-dependent mechanical response of wrap-around tendons under tensile, compressive and combined multiaxial loads
Acta Biomaterialia, 183, 157-172, (2024) [Link]
L. Poppa, L. Frerichs, J. Liu, M. Böl
Development and implementation of a damage model for potato tuber blackspot in discrete element method to analyze harvesting and handling processes
Journal of the ASABE, 67, 517-524, (2024) [Link]
S. Papenkort, M. Borsdorf, S. Kiem, M. Böl, T. Siebert
Regional differences in stomach stretch during organ filling and their implications on the mechanical stress response
Journal of Biomechanics, 168, 112107, (2024) [Link]
L. Gahleitner, G. Thummerer, B. Blank, J. Wiedemann, G. Mayr, C. Hühne, P. Burgholzer, U. Cakmak
Photothermal defect imaging in hybrid fiber metal laminates using the virtual wave concept
Journal of Applied Physics, 135, 7, (2024) [Link]
O. Steffen, P. Meyer, C. Hühne
Natural laminar flow leading edge: Requirements, design, and experimental validation under operational loads
Aerospace Science and Technology, 146, 108913, (2024) [Link]
M. Borsdorf, S. Papenkort, M. Böl, T. Siebert
Influence of muscle length on the three-dimensional architecture and aponeurosis dimensions of rabbit calf muscles
Journal of the Mechanical Behavior of Biomedical Materials, 152, 106452, (2024) [Link]
2023
T. Rothe, S. Gantner, N. Hack, C. Hühne
A Dynamic Winding Process of individualized fibre reinforcement structures for Additive Manufacturing in Construction
Open Conference Proceedings, Vol. 3, (2023) [Link]
J. Wiedemann, T. Barth, T. Roloff, T. Kluge, N. Rauter, C. Hühne
Influence of residual stresses on the dispersion behavior of guided ultrasonic waves in fiber metal laminates
Proceedings of the Fourteenth International Workshop on Structural Health Monitoring (IWSHM), (2023) [Link]
J. Wiedemann, P. Meyer, J. Feder, M. Sinapius, J. Riemenschneider, C. Hühne
Electromechanical Deicing of Helicopter Structures with Integrated Ice Detection by Impedance Measurement
Journal of Aerospace Engineering, 37, 04023094, (2023) [Link]
P. Meyer, J. Finder, C. Hühne
Test Methods for the Mechanical Characterization of Flexure Hinges
Experimental Mechanics, 63, 1203–1222, (2023) [Link]
P. Meyer, C. Hühne, K. Bramsiepe, W. Krüger
Aeroelastic Analysis of Actuated Adaptive Wingtips Based on Pressure Actuation
Journal of Aircraft, Article in Advance, (2023) [Link]
P. Meyer, M. Vorhof, J. Koord, C. Sennewald, C. Cherif, C. Hühne
Anisotropic flexure hinges: Manufacturing and mechanical characterization for application in pressure-actuated morphing structures
Composites Part B: Engineering, 266, 110967, (2023) [Link]
F. Walter, R. Seydewitz, P. Mitterbach, T. Siebert, M. Böl
On a three-dimensional model for the description of the passive characteristics of skeletal muscle tissue
Biomechanics and Modeling in Mechanobiology, 22, 1499–1514, (2023) [Link]
M. Rottmann, T. Roloff, N. Rauter, L. Rittmeier, M. Sinapius, W. E. Weber
A numerical study on planar gradient acoustic impedance matching for guided ultrasonic wave detection
Journal of Vibration and Control, 0, 10775463221149764, (2023) [Link]
T. Rothe, J. Pösch, S. Gantner, N. Hack, C. Hühne
Optimization of tensile properties and bond behaviour to concrete of fibre reinforcement strands produced within a dynamic fibre winding process
11th International Conference on Fiber-Reinforced Polymer (FRP) Composites in Civil Engineering (CICE 2023), Rio de Janeiro, Brazil, (2023) [Link]
H. Thölking, F. Cerbe, M. Sinapius
Analytical-numerical simulation of 4D-structures printed with FDM
Materials Today: Proceedings, (2023) [Link]
T. Barth, J. Wiedemann, T. Roloff, T. Behrens, N. Rauter, C. Hühne, M. Sinapius, R. Lammering
Experimental determination of dispersion diagrams over large frequency ranges for guided ultrasonic waves in fiber metal laminates
Smart Materials and Structures, 32, 085011, (2023) [Link]
T. Barth, J. Wiedemann, T. Roloff, C. Hühne, M. Sinapius, N. Rauter
Investigations on Guided Ultrasonic Wave Dispersion Behavior in Fiber Metal Laminates Using Finite Element Eigenvalue Analysis
Proceedings in Applied Mathematics & Mechanics, 23, e202200149, (2023) [Link]
M. Goutier, K. Hilbig, T. Vietor, M. Böl
Process Parameters and Geometry Effects on Piezoresistivity in Additively Manufactured Polymer Sensors
Polymers, 15, 2159, 1-15, (2023) [Link]
A. Kyriazis, S. Charif, K. Rager, A. Dietzel, M. Sinapius
A Parametric Model for the Analysis of the Impedance Spectra of Dielectric Sensors in Curing Epoxy Resins
Sensors, 23, (2023) [Link]
S. Papenkort, M. Borsdorf, T. Siebert, M. Böl
A geometry model of the porcine stomach featuring mucosa and muscle layer thicknesses
Journal of the Mechanical Behavior of Biomedical Materials, 142, 105801, (2023) [Link]
L. Rittmeier, N. Rauter, A. Mikhaylenko, R. Lammering, M. Sinapius,
The Guided Ultrasonic Wave Oscillation Phase Relation Between the Surfaces of Plate-like Structures of Different Material Settings
Acoustics 2023, 5, 136–164, (2023) [Link]
R. Mitkus, L. Piechowiak, M. Sinapius
Characterization of UV Light Curable Piezoelectric 0-0-3 Composites Filled with Lead-Free Ceramics and Conductive Nanoparticles
Journal of Composites Science, 7, 89, (2023) [Link]
A. Zarinwall, R. Mitkus, A. Marth, V. Maurer, M. Sinapius, G. Garnweitner
Processing of 3-(Trimethoxysilyl)propyl Methacrylate (TMSPM) Functionalized Barium Titanate/Photopolymer Composites: Functionalization and Process Parameter Investigation
Journal of Composites Science, 7, 47, (2023) [Link]
J. Liu
Characterisation of the Mechanical Properties of Heat-Induced Protein Deposits in Immersed Cleaning Systems
Springer, (2023) [Link]
L. Klemm, R. Seydewitz, T. Siebert, M. Böl
Three-dimensional multi-field modelling of gastric arrhythmias and their effects on antral contractions
Computers in Biology and Medicine, 153, 106488, (2023) [Link]
2022
J. N. Haus, W. Lang, T. Roloff, L. Rittmeier, S. Bornemann, M. Sinapius, A. Dietzel
MEMS Vibrometer for Structural Health Monitoring Using Guided Ultrasonic Waves
Sensors, 22, 5368, (2022) [Link]
R. Mitkus, M. Sinapius
Piezoelectric Ceramic/Photopolymer Composites Curable with UV Light: Viscosity, Curing Depth, and Dielectric Properties
Journal of Composites Science, 6, 212, (2022) [Link]
F. Cerbe, M. Sinapius, M. Böl
Methodology for FDM 4D printing with thermo-responsive SMPs
Materials Today: Proceedings, (2022) [Link]
R. Mitkus, F. Cerbe, M. Sinapius
Book chapter: 4D printing electro-induced shape memory polymers
in Smart Materials in Additive Manufacturing, 2, 19-51, (2022) [Link]
J. Wiedemann, J.-U. R. Schmidt, C. Hühne
Applicability of Asymmetric Specimens for Residual Stress Evaluation in Fiber Metal Laminates
Journal of Composites Science, 6, 329, (2022) [Link]
T. Roloff, R. Mitkus, J. N. Lion, M. Sinapius
3D-Printable Piezoelectric Composite Sensors for Acoustically Adapted Guided Ultrasonic Wave Detection
Sensors, 22, 6964, (2022) [Link]
A. Kyriazis, C. Pommer, D. Lohuis, K. Rager, A. Dietzel, M. Sinapius
Comparison of Different Cure Monitoring Techniques
Sensors 2022, 22, (2022) [Link]
L. Rittmeier, T. Roloff, N. Rauter, A. Mikhaylenko, J. N. Haus, R. Lammering, A. Dietzel, M. Sinapius
Influence of a Flat Polyimide Inlay on the Propagation of Guided Ultrasonic Waves in a Narrow GFRP-Specimen
Materials, 15, 6752, (2022) [Link]
M. Schulz
A New Kirchhoff-Love Beam Element and its Application to Polymer Mechanics
Springer, (2022) [Link]
C. von der Heide, J. Steinmetz, O. Völkerink, P. Makiela, C. Hühne, M. Sinapius, A. Dietzel
Polyetherimide-Reinforced Smart Inlays for Bondline Surveillance in Composites
Polymers 2022, 14, 3816, (2022) [Link]
H. Schlums, C. Hühne, M. Sinapius
Design of a Herringbone-Grooved Bearing for Application in an Electrically Driven Air Compressor
Machines 2022, 10, 662, (2022) [Link]
M. Schutzeichel, T. Strübing, O. Tamer, T. Kletschkowski, H. Monner, M. Sinapius
Experimental and Numerical Investigation of a Multifunctional CFRP towards Heat Convection under Aircraft Icing Conditions
Applied Mechanics 2022, 3, 995-1018, (2022) [Link]
J. Wiedemann, R. Prussak, E. Kappel, C. Hühne
In-situ quantification of manufacturing-induced strains in fiber metal laminates with strain gages
Composite Structures, 297, 115967, (2022) [Link]
P. Meyer, H. Traub, C. Hühne
Actuated adaptive wingtips on transport aircraft: Requirements and preliminary design using pressure-actuated cellular structures
Aerospace Science and Technology, 128, 107735, (2022) [Link]
O. Tamer, F. Walter, M. Sinapius, M. Böl
A computational geometric parameter optimisation of the thermomechanical deicing concept
Actuators, 11, 223, (2022) [Link]
R. Trostorf, E. Morales Orcajo, A. Pötzke, T. Siebert, M. Böl
A pilot study on active and passive ex vivo characterisation of the urinary bladder and its impact on three-dimensional modelling
Journal of the Mechanical Behavior of Biomedical Materials, 133, 105347, (2022) [Link]
L. Klemm, R. Seydewitz, M. Böl
Three-dimensional multi-scale modelling of electro-chemomechanical gastric smooth muscle contraction
Solid (Bio)mechanics: Challenges of the Next Decade, Studies in Mechanobiology, Tissue Engineering and Biomaterials, G. Sommer et al. (eds.): Springer Nature Switzerland, 299-331, (2022) [Link]
H. Schmiedeke, J. Sick, M. Sinapius
Experimental Investigation of Two Switching States of an Active Foil Bearing during Start-Up
Machines, 10, (2022) [Link]
M. Neitmann, T. Rothe, E. Kappel, C. Hühne
Assembly of Compliant Structures with Autonomous Industrial Mobile Manipulators (AIMM) Using an End Effector with Active Deformation Compensation for the Assembly of Flaps
Machines, 10, 291, (2022) [Link]
M. Hoppstädter, D. Püllmann, R. Seydewitz, E. Kuhl, M. Böl
Correlating the microstructural architecture and macrostructural behaviour of the brain
Acta Biomateriala, 151, 379-395, (2022) [Link]
P. Scholle, M. Sinapius
Influence of the electrical anisotropy of unidirectional carbon fibre reinforced plastics on their self strain sensing properties
Composites Part C: Open Access, 100256, (2022) [Link]
K. Karimian, R.Seydewitz, D. Töpfer, M. Böl
Poro-viscoelastic behaviour of the zona pellucida: Impact of three-dimensional modelling on material characterisation
Journal of the Mechanical Behavior of Biomedical Materials, 131, 105211, (2022) [Link]
M. Böl, S. Kohn, K. Leichsenring, E. Morales-Orcajo, A. E. Ehret
On multiscale tension-compression asymmetry in skeletal muscle
Acta Biomaterialia, 144, 210-220, (2022) [Link]
U. Römer, J. Liu, M. Böl
Surrogate-based Bayesian calibration of biomechanical models with isotropic material behavior
International Journal for Numerical Methods in Biomedical Engineering, 38, 4, e3575, (2022) [Link]
M. Bahar, M. Brysch, M. Sinapius
In Situ Consolidation of Thermoplastic Prepreg by Generating Harmonic Oscillations on the Consolidation Roller
Journal of Composites Science, 6, 1, (2022) [Link]
2021
A. Kyriazis, J. Feder, K. Rager, C. von der Heide, A. Dietzel, M. Sinapius
Reducing the Weakening Effect in Fibre-Reinforced Polymers Caused by Integrated Film Sensors
Journal of Composites Science, 5, (2021) [Link]
P. Scholle, S. Rüther, M. Sinapius
Comparison of Electrical Contacting Techniques to Carbon Fiber Reinforced Plastics for Self-Strain-Sensing Applications
C 2021, 7, 81, (2021) [Link]
P. Scholle, M. Sinapius
Measurement of Two-Dimensional Electrical Potential Fields in CFRP using Four-Probe Resistance Scans
Journal of Physics Communications, (2021) [Link]
R. Mitkus, M. Scharfnofske, M. Sinapius
Characterization 0.1 wt.% Nanomaterial/Photopolymer Composites with Poor Nanomaterial Dispersion: Viscosity, Cure Depth and Dielectric Properties
Polymers, 13, 3948, (2021) [Link]
R. Mitkus, A. Alashkar, M. Sinapius
An Attempt to Topology Optimize 3D Printed Piezoelectric Composite Sensors for Highest D31 Output
Conference SMASIS2021, V001T06A006, (2021) [Link]
T. Roloff, R. Mitkus, J. Lion, M. Sinapius
3D printable piezoelectric composite sensors for guided ultrasonic wave detection
Engineering Proceedings, 10, 36, (2021) [Link]
K. Leichsenring, A. Viswanathan, S. Kutschke, T. Siebert, M. Böl
Age-dependent mechanical and microstructural properties of the rabbit soleus muscle
Acta Biomaterialia, 134, 453-465, (2021) [Link]
M. Vorhof, C. Sennewald, P. Schegner, P. Meyer, C. Hühne, C. Cherif, M. Sinapius
Thermoplastic Composites for Integrally Woven Pressure Actuated Cellular Structures: Design Approach and Material Investigation
Polymers, 13, 3128, (2021) [Link]
F. Walter, M. Sinapius
Influence of Aerodynamic Preloads and Clearance on the Dynamic Performance and Stability Characteristic of the Bump-Type Foil Air Bearing
Machines, 9, 178, (2021) [Link]
M. Sprengholz, H. Traub, M. Sinapius, S. Dähne, C. Hühne
Rapid transformation of lamination parameters into stacking sequences
Composite Structures, 276, (2021) [Link]
J. Liu, M. Böl
Experimental characterisation of the mechanical failure behaviour of whey protein gel treated with sodium hydroxide
Food and Bioproducts Processing, 130, 94-104, (2021) [Link]
S. Papenkort, M. Böl, T. Siebert
Architectural model for muscle growth during maturation
Biomechanics and Modeling in Mechanobiology 20, 2031–2044, (2021) [Link]
S. Nagaraja, K. Leichsenring, M. Ambati, L. De Lorenzis, M. Böl
On a phase-field approach to model fracture of small intestine walls
Acta Biomaterialia, 130, 317-331, (2021) [Link]
H.N.R. Wagner, G. Niewöhner, A. Pototzky, C. Hühne
On the imperfection sensitivity and design of tori-spherical shells under external pressure
International Journal of Pressure Vessels and Piping, Volume 191, 104321, (2021) [Link]
S. Niemann, H.N.R. Wagner, C. Hühne
Anisogrid stiffened panel under axial compression: Manufacturing, numerical analysis and experimental testing
Thin-Walled Structures, Volume 161, 107483, (2021) [Link]
N. Hack, M. Bahar, C. Hühne, W. Lopez, S. Gantner, N. Khader, T. Rothe
Development of a Robot-Based Multi-Directional Dynamic Fiber Winding Process for Additive Manufacturing Using Shotcrete 3D Printing
Fibers, 9, 39, (2021) [Link]
C. von der Heide, J. Steinmetz, M.J. Schollerer, C. Hühne, M. Sinapius, A. Dietzel
Smart Inlays for Simultaneous Crack Sensing and Arrest in Multifunctional Bondlines of Composites
Sensors, 21, 3852, (2021) [Link]
M. Borsdorf, M. Böl, T. Siebert
Influence of layer separation on the determination of stomach smooth muscle properties
European Journal of Physiology, 473, 911-920, (2021) [Link]
J. Liu, S. Kutschke, K. Keimer, V. Kosmalla, D. Schürenkamp, N. Goseberg, M. Böl
Experimental characterisation and three-dimensional modelling of Elymus for the assessment of ecosystem services
Ecological Engineering, 166, 106233, (2021) [Link]
P. Scholle, M. Sinapius
A Review on the Usage of Continuous Carbon Fibers for Piezoresistive Self Strain Sensing Fiber Reinforced Plastics
Journal of Composites Science, 5, 96, (2021) [Link]
P. Meyer, S. Lück, T. Spuhler, C. Bode, C. Hühne, J. Friedrichs, M. Sinapius
Transient Dynamic System Behavior of Pressure Actuated Cellular Structures in a Morphing Wing
Aerospace, 8, 89, (2021) [Link]
A. Stracuzzi, J. Dittmann, M. Böl, A. E. Ehret
Visco- and poro-elastic contributions of the zona pellucida to the mechanical response of oocytes
Biomechanics and Modeling in Mechanobiology, 20, 751-765, (2021) [Link]
M. Böl, K. Schrinner, S. Tesche, R. Krull
Challenges of influencing cellular morphology by morphology engineering techniques and mechanical induced stress on filamentous pellet systems - a critical review
Engineering in Life Sciences, 21, 51-67, (2021) [Link]
S. Kohn, K. Leichsenring, R. Kuravi, A. E. Ehret, M. Böl
Direct measurement of the direction-dependent mechanical behaviour of skeletal muscle extracellular matrix
Acta Biomaterialia, 122, 249-262, (2021) [Link]
R. Kuravi, K. Leichsenring, R. Trostorf, E. Morales-Orcajo, M. Böl, A. E. Ehret
Predicting muscle tissue response from calibrated component models and histology-based finite element models
Journal of the Mechanical Behavior of Biomedical Materials, 117, 104375, (2021) [Link]
J. Steinmetz, T. Löbel, O. Völkerink, C. Hühne, M. Sinapius, C. von der Heide, A. Dietzel
The Working Principles of a Multifunctional Bondline with Disbond Stopping and Health Monitoring Features for Composite Structures
Journal of Composites Science, 5, 51, (2021) [Link]
A. Kyriazis, R. Kilian, M. Sinapius, K. Rager, A. Dietzel
Tensile Strength and Structure of the Interface between a Room-Curing Epoxy Resin and Thermoplastic Films for the Purpose of Sensor Integration
Polymers, 13, (2021) [Link]
H. Schmiedeke, M. Sinapius, N. Prechavut
Experimental Investigation of the Leaf Type Bearing Structure with Undersprings Under Dynamic Excitation
Machines, 9, (2021) [Link]
H. Watschke, M. Goutier, J. Heubach, T. Vietor, K. Leichsenring, M. Böl
Novel resistive sensor design utilizing the geometric freedom of additive manufacturing
Applied Science, 11, 113-128, (2021) [Link]
R. Trostorf, E. Morales-Orcajo, T. Siebert, M. Böl
Location- and layer-dependent biomechanical and microstructural characterisation of the porcine urinary bladder wall
Journal of the Mechanical Behavior of Biomedical Materials, 115, 104275, (2021) [Link]
R. Kuravi, K. Leichsenring, M. Böl, A. E. Ehret
3D finite element models from serial section histology of skeletal muscle tissue - The role of micro-architecture on mechanical behavior
Journal of the Mechanical Behavior of Biomedical Materials, 113, 104109, (2021) [Link]
J. Liu, M. Helbig, J.-P. Majschak, M. Böl
Whey protein gel - experimental testing and modelling of wire cutting
Journal of Food Engineering, 292, 110324, (2021) [Link]
L. Brimmers, K. Endriß, R. Trostorf, M. Böl, M. Schmicke
Endocrine characterization of pigs with different coping styles under varying housing conditions
submitted, (2021)
J. Liu, A. Mildner, J. Großeheilmann, M. Böl
Polymerized Ionic Liquids (PILs)-based hydrogels with extremely high mechanical strength
submitted, (2021)
2020
S.K. Sharma, V.S. Chauhan, M. Sinapius
A review on deformation-induced electromagnetic radiation detection: history and current status of the technique
Journal of Materials Science, 56, 4500–4551, (2020) [Link]
S. Papenkort, M. Böl, T. Siebert
Three-dimensional muscle architecture of rabbit M. soleus during growth
Journal of Biomechanics, 112, 110054, (2020) [Link]
A. Kyriazis, A. Kais, M. Sinapius, K. Rager, A. Dietzel
Adhesion of Multifunctional Substrates for Integrated Cure Monitoring Film Sensors to Carbon Fiber Reinforced Polymers
Journal of Composites Science, 4, (2020) [Link]
C. Pommer, M. Sinapius
Proof of Concept for Pultrusion Control by Cure Monitoring Using Resonant Ultrasound Spectroscopy
Journal of Composites Science, 4, 115, (2020) [Link]
P. Schenk, S. Papenkort, M. Böl, T. Siebert, R. Grassme, C. Rode
A simple geometrical model accounting for 3D muscle architectural changes across muscle lengths
Journal of Biomechanics, 103, 109694, (2020) [Link]
R. Rockenfeller, M. Günther, N. Stutzig, D. Haeufle, T. Siebert, S. Schmitt, K. Leichsenring, M. Böl, T. Götz
Exhaustion of skeletal muscle fibers within seconds: incorporating phosphate kinetics into a Hill-type model
Frontiers in Physiology, Striated Muscle Physiology, 11, 306, (2020) [Link]
M. Bauer, E. Morales-Orcajo, L. Klemm, R. Seydewitz, V. Fiebach, T. Siebert, M. Böl
Biomechanical and microstructural characterisation of the porcine stomach wall: Location- and layer-dependent investigations
Acta Biomaterialia, 102, 83-99, (2020) [Link]
M. Böl, R. Seydewitz, K. Leichsenring, F. Sewerin
A phenomenological model for the inelastic stress-strain response of a potato tuber
Journal of the Mechanics and Physics of Solids, 137, 103870, (2020) [Link]
L. Klemm, R. Seydewitz, M. Borsdorf, T. Siebert, M. Böl
On a coupled electro-chemomechanical model of gastric smooth muscle contraction
Acta Biomaterialia, 109, 163-181, (2020) [Link]
J. Liu, H. Wiese, W. Augustin, S. Scholl, M. Böl
Mechanical comparison of milk and whey protein isolate fouling deposits using indentation testings
Food and Bioproducts Processing, 122, 145-158, (2020) [Link]
C. Lüders
Nonlinear-Elastic Orthotropic Material Modeling of an Epoxy-Based Polymer for Predicting the Material Behavior of Transversely Loaded Fiber-Reinforced Composite
Journal of Composites Science, 4, 46, (2020) [Link]
C. Lüders, G. Kalinka, W. Li, M. Sinapius, T. Wille
Experimental and numerical multiscale approach to thermally cycled FRP
Composite Structures, Volume 244, (2020) [Link]
H. Sadri, A. Kyriazis, H. Schlums, M. Sinapius
On modeling the static shape control of an adaptive air foil bearing
Smart Materials and Structures, Volume 29, 085043, (2020) [Link]
S. Taleb, L. Rittmeier, M. Sinapius, F. Boubenider, D. Schmidt
Experimental Study of Lamb Waves Propagation inside an Impact Damage in the Size of the Used Wavelength
Russian Journal of Nondestructive Testing, Volume 56, 2, 141–150, (2020) [Link]
O. Tamer, A. Kyriazis, M. Sinapius
Parameter study and experimental analysis of a thermo-mechanical de-icing concept
Smart Materials and Structures, Volume 29, 045021, (2020) [Link]
P. Wierach, S. Petersen, M. Sinapius
Design and Experimental Characterization of an Actuation System for Flow Control of an Internally Blown Coanda Flap
Aerospace, 7, (2020) [Link]
M. Böl, R. Iyer, M. Garces-Schröder, S. Kohn, A. Dietzel
Mechano-geometrical skeletal muscle fibre characterisation under cyclic and relaxation loading
Journal of the Mechanical Behavior of Biomedical Materials, 101, 104001, (2020) [Link]
S. Papenkort, M. Böl, T. Siebert
Three-dimensional muscle architecture of rabbit M. soleus during growth
Journal of Biomechanics, 112, 110054, (2020) [Link]
2019
M. Schulz, M.Böl
A finite element formulation for a geometrically exact Kirchhoff-Love beam based on constrained translation
Computational Mechanics, 64, 1155-1175, (2019) [Link]
M. Borsdorf, A. Tomalka, N. Stutzig, E. Morales Orcajo, M. Böl, T. Siebert
Locational and directional dependencies of smooth muscle properties in pig urinary bladder
Frontiers in Physiology, 10, 63, (2019) [Link]
M. Schulz, J. Dittmann, M. Böl
Modeling the mechanical behavior of semi-flexible polymer chains using a surrogate model based on a finite-element approach to Brownian polymer dynamics
Journal of the Mechanics and Physics of Solids, 130, 101-117, (2019) [Link]
R. Seydewitz, T. Siebert, M. Böl
On a three-dimensional constitutive model for history effects in skeletal muscles
Biomechanics and Modeling in Mechanobiology, 18, 1665-1681, (2019) [Link]
M. Böl, R. Iyer, J. Dittmann, M. Garcés-Schröder, A. Dietzel
Investigating the passive mechanical behaviour of skeletal muscle fibres: Micromechanical experiments and Bayesian hierarchical modelling
Acta Biomaterialia, 92, 277-289, (2019) [Link]
J. Dittmann, S. Tesche, R. Krull, M. Böl
The influence of salt-enhanced cultivation on the micromechanical behaviour of filamentous pellets
Biochemical Engineering Journal, 148, 65-76, (2019) [Link]
M. Garcés-Schröder, T. Zimmermann, C. Siemers, M. Leester-Schädel, M. Böl, A. Dietzel
Shape memory alloy actuators for silicon microgrippers
Journal of Microelectromechanical Systems, 28, 869-881, (2019) [Link]
A. E. Ehret, M. Böl
Recent topics in biomechanics and mechanobiology
GAMM Mitteilungen, 1, (2019) [Link]
F. Sewerin, S. Rigopoulos
Algorithmic aspects of the LES-PBE-PDF method for modeling soot particle size distributions in turbulent flames
Combustion Science and Technology, 1-31, (2019) [Link]
F. Sewerin
On the local identifiability of constituent stress-strain laws for hyperelastic composite materials
Computational Mechanics, (2019) [Link]
J. Liu, H. Wiese, W. Augustin, S. Scholl, M. Böl
Comparison of the mechanical properties of milk fouling and whey protein fouling
GAMM Mitteilungen, 1, (2019) [Link]
L. Klemm, R. Seydewitz, E. Morales-Orcajo, M. Böl
On the electro-chemo-mechanical modelling of stomach smooth muscle contraction
GAMM Mitteilungen, 1, (2019) [Link]
L. Kacergis, R. Mitkus, M. Sinapius
Influence of fused deposition modeling process parameters on the transformation of 4D printed morphing structures
Smart Materials and Structures, 28, 105042, (2019) [Link]
E. Kappel, R. Prussak, J. Wiedemann
On a simultaneous use of fiber-Bragg-gratings and strain-gages to determine the stress-free temperature Tsf during GLARE manufacturing
Composite Structures, Volume 227, 1, 111279, (2019) [Link]
Lüders, C.; Sinapius, M.
Fatigue of fibre-reinforced plastics due to cryogenic thermal cycling
Journal of Composite Materials, 1-13, (2019) [Link]
Lüders, C., Sinapius, M., Krause, D.
Adaptive cycle jump and limits of degradation in micromechanical fatigue simulations of fibre-reinforced plastics
International Journal of Damage Mechanics, Volume 28, 1523-1555, (2019) [Link]
Meyer, P., Boblenz, J., Sennewald, C. , Vorhof, M. , Hühne, C. , Cherif, C. and Sinapius, M.
Development and Testing of Woven FRP Flexure Hinges for Pressure-Actuated Cellular Structures with Regard to Morphing Wing Applications
MDPI Aerospace, 6, 116 (2019) [Link]
Prussak, R., Stefaniak, D., Kappel, E., Hühne, C. and Sinapius, M.
Smart cure cycles for fiber metal laminates using embedded fiber Bragg grating sensors
Composite Structures 213, 252–260 (2019) [Link]
Exner, W., Hein, R., Mahrholz, T., Wierach, P., Monner, H.P., Sinapius, M.
Impact of nanoparticles on the process-induced distortions of carbon fiber reinforced plastics: An experimental and simulative approach
Journal of Applied Polymer Science, Vol. 136, 5, 47031, (2019) [Link]
Sadri, H., Schlums, H., Sinapius, M.
Investigation of Structural Conformity in a Three-Pad Adaptive Air Foil Bearing With Regard to Active Control of Radial Clearance
Journal of Tribology 141, 081701, (2019) [Link]
2018
J. Dittmann, A. Dietzel, M. Böl
Mechanical characterisation of oocytes - the influence of sample geometry on parameter identification
Journal of the Mechanical Behavior of Biomedical Materials, 77, 764-775, (2018) [Link]
M. Garcés-Schröder, D. Metz, L. Hecht, M. Leester-Schädel, R. Iyer, M. Böl, A. Dietzel
Characterization of skeletal muscle passive mechanical properties by novel micro-force sensor and tissue micro-dissection by femtosecond laser ablation
Microelectronic Engineering, 192, 70-76, (2018) [Link]
F. Sewerin, S. Rigopoulos
An LES-PBE-PDF approach for predicting the soot particle size distribution in turbulent flames
Combustion and Flame, 189, 62-76, (2018) [Link]
E. Morales Orcajo, T. Siebert, M. Böl
Location-dependent correlation between tissue structure and the mechanical behaviour of the urinary bladder
Acta Biomaterialia, 75, 263-278, (2018) [Link]
N. Beißner, A. Bolea Albero, J. Füller, T. Kellner, L. Lauterboeck, J. Liang, M. Böl, B. Glasmacher, C. Müller-Goymann, S. Reichl
Improved in vitro models for preclinical drug and formulation screening focusing on 2D and 3D skin and cornea constructs
European Journal of Pharmaceutics and Biopharmaceutics, 126, 57-66, (2018) [Link]
C. Wick, M. Böl, Florian Müller, R. Blickhan, T. Siebert
Packing of muscles in the rabbit shank influences three-dimensional architecture of M. soleus
Journal of the Mechanical Behavior of Biomedical Materials, 83, 20-27, (2018) [Link]
R. Seydewitz, T. Siebert, M. Böl
A phenomenological approach for modelling force enhancement and depression in skeletal muscle tissue
Proceedings in Applied Mathematics and Mechanics, 18, (2018) [Link]
Al-Lami, A., Hilmer, P., Sinapius, M.
Eco-Efficiency assessment of manufacturing carbon fiber reinforced polymers (CFRP) in aerospace industry
Aerospace Science and Technology, 79 pp., 669-678, (2018) [Link]
Estevam Schmiedt, R., Qian, C., Behr, C., Hecht, L. , Dietzel, A., Sinapius, M.
Flexible sensors on polymide fabricated by femtosecond laser for integration in fiber reinforced polymers
Flex. Print. Electron., 3 025003, (2018) [Link]
Exner, W., Hein, R., Mahrholz, T., Wierach, P., Monner, H.P., Sinapius, M.
Impact of nanoparticles on the process-induced distortions of carbon fiber reinforced plastics: An experimental and simulative approach
Journal of Applied Polymer Science, Vol. 136, (5), No. 47031, (2018) [Link]
Geier, S., Mahrholz, T., Wierach, P. und Sinapius, M.
Morphology- and Ion Size-Induced Actuation of Carbon Nanotube Architectures. Int'l J. of Smart and Nano Materials
Vol 9, No 2, pp. 111-134, (2018) [Link]
Jux. M., Fankhänel. J., Daum, B., Mahrholz, T., Sinapius, M., Rolfes, R.
Mechanical properties of epoxy/boehmite nanocomposites in dependency of mass fraction and surface modification - An experimental and numerical approach
Polymer 141 pp. 34-45, (2018) [Link]
Khattab, I.Al. and M. Sinapius, M.
Multiscale modelling and simulation of polymer nanocomposites using transformation field analysis (TFA)
Composite Structures 209 (2019) 981–991, (2018) [Link]
Lorsch, P., Sinapius, M. and Wierach, P.
Methodology for high-frequency testing of fiber-reinforced plastics, in: Christ, H.J. (Ed.): Fatigue of Materials at Very High Numbers of Loading Cycles
Springer Spectrum, (2018) [Link]
Lüders, C.; Krause, D.; Kreikemeier, J.
Fatigue damage model for fibre-reinforced polymers at different temperatures considering stress ratio effects
Journal of Composite Materials, (2018) [Link]
Pommer, C., Sinapius, M.
A Novel Approach to Monitoring the Curing of Epoxyin Closed Tools by Use of Ultrasonic Spectroscopy
Sensors 2018, Vol. 18 (1), (2018) [Link]
Pommer, C., Sinapius, M.
Sensor Design Optimization for Ultrasonic Spectroscopy Cure Monitoring
Sensors 2018, 18, 1819, (2018) [Link]
Prussak, R., Stefaniak, D., Hühne, C., Sinapius, M.
Evaluation of residual stress development in FRP-metal hybrids using fiber Bragg grating sensors
Production Engineering, (2018) [Link]
Scholle, P. and Sinapius, M.
Pulse Ultrasonic Cure Monitoring of the Pultrusion Process
Sensors 2018, Special Issue "Advances in FRP Composites: Applications, Sensing, and Monitoring", Vol. 18(10), (2018) [Link]
Sharma, S.K., Sivarathri, A.K., Chauhan, V. S. and Sinapius, M.
Effect of Low Temperature on Electromagnetic Radiation from Soft PZT SP-5A Under Impact Loading
Journal of Electronic Materials, (2018) [Link]
Sinapius, M.
Adaptronik Prinzipe - Funktionswerkstoffe - Funktionselemente - Zielfelder mit Forschungsbeispielen
Springer Verlag, (2018) [Link]
Rakhshbahar, M. und Sinapius, M.
A Novel Approach: Combination of Automated Fiber Placement (AFP) and Additive Layer Manufacturing (ALM)
J. Compos. Sci., 2, 42, (2018) [Link]
Sadri, H.; Schlums, H.; Sinapius, M.
Design Characteristics of an Aerodynamic Foil Bearing with Adaptable Bore Clearance
Proceedings of ASME 2018 Turbo Expo 2018, (2018)
R.Trostorf, K. Leichsenring, R. Seydewitz, M. Böl
On the phenomenological model for potato tuber tissue in relation to its anatomy
Proceedings in Applied Mathematics and Mechanics, 18, 1-2, (2018)
2017
M. Böl, K. Leichsenring, T. Siebert
Effects of growth on muscle, tendon and aponeurosis tissues in rabbit shank musculature
The Anatomical Record, 300, 1123-1136, (2017) [Link]
R. Menzel, M. Böl, T. Siebert
Importance of contraction history on muscle force of porcine urinary bladder smooth muscle tissue
International Urology and Nephrology, 49, 205-214, (2017) [Link]
R. Seydewitz, R. Menzel, T. Siebert, M. Böl
Three-dimensional mechano-electrochemical model for smooth muscle contraction of the urinary bladder
Journal of the Mechanical Behavior of Biomedical Materials, 75, 128-146, (2017) [Link]
F. Sewerin, S. Rigopoulos
An explicit adaptive grid approach for the numerical solution of the population balance equation
Chemical Engineering Science, 168, 250-270, (2017) [Link]
C. E. Garcia-Gonzalez, F. Sewerin, A. Liu, S. Rigopoulos, B. A. O. Williams
Predicting and measuring soot formation and particle size distributions in a laminar diffusion flame
Proceedings of the European Combustion Meeting, Dubrovnik, Croatia, (2017)
T. Siebert, A. Tomalka, N. Stutzig, K. Leichsenring, M. Böl
Changes in three-dimensional muscle structure of rabbit gastrocnemius, flexor digitorum longus, and tibialis anterior during growth
Journal of the Mechanical Behavior of Biomedical Materials, 74, 507-519, (2017) [Link]
R. Seydewitz, E. Morales-Orcajo, M. Böl
Modelling the contraction properties of smooth muscle cells in bladder tissue
Proceedings in Applied Mathematics and Mechanics, 17, 223-224, (2017) [Link]
A. Tomalka, M. Borsdorf, M. Böl, T. Siebert
Porcine stomach smooth muscle force depends on history-effects
Frontiers in Physiology – Gastrointestinal Sciences, 8, 802, (2017) [Link]
M. Garcés-Schröder, L. Hecht, A. Vierheller, M. Leester-Schädel, M. Böl, A. Dietzel
Micro-grippers with femtosecond-laser machined in-plane agonist-antagonist SMA actuators integrated on wafer-level by galvanic riveting
Proceedings, 1 (4), 1-5, (2017) [Link]
F. Sewerin, S. Rigopoulos
An LES-PBE-PDF approach for modeling particle formation in turbulent reacting flows
Physics of Fluids, 29(10), 105105, (2017) [Link]
M. Schulz, M. Böl
An objective and locking-free finite-element formulation for geometrically exact Kirchhoff rods
Proceedings in Applied Mathematics and Mechanics, 17, 347-348, (2017) [Link]
Jux, M. und Finke, B. Schilde, C. und Mahrholz, Th. Sinapius, M., Kwade, A.
Effects of Al(OH)O nanoparticle agglomerate size in epoxy resin on tension, bending and fracture properties
Journal of Nanoparticle Research, 19 (4), Seite 139 ff, (2017) [Link]
Hesse, C.; Vivar Perez,J.M.; Sinapius, M.
Frequency-independent radiation modes of interior sound radiation: An analytical study
Journal of Sound and Vibration, Vol. 392, S. 31-40, (2017) [Link]
Geier, S.; Mahrholz, Thorsten; Wierach, Peter; Sinapius, M.
Experimental Investigations of Actuators Based on Carbon Nanotube Architectures
In A. L. Araujo, C. A. Mota Soares (Hrsg.)
Smart Structures and Materials, S. 67 - 95, Springer, (2017) [Link]
M. Endres, M., Sommerwerk, H., Mendig, C., Sinapius, M., Horst, P.
Experimental study of two electro-mechanical de-icing systems applied on a wing section tested in an icing wind tunnel
CEAS Aeronaut J (2017) 8:429–439, (2017) [Link]
Raddatz, F., Szewieczek, A., Sinapius, M.
Experimental Methods. In: R. Lammering, U. Gabbert, M. Sinapius, T. Schuster, P. Wierach (Eds.): Lamb-Wave Based Structural Health Monitoring in Polymer Composites
S. 91-111, Springer, Cham 2017, (2017) [Link]
Heintze, C., Duczek, S., Sinapius, M.
A Minimal Model for Fast Approxiamtion of Lamb Wave Propagation in Complex Aircraft Parts. In: R. Lammering, U. Gabbert, M. Sinapius, T. Schuster, P. Wierach (Eds.): Lamb-Wave Based Structural Health Monitoring in Polymer Composites
S. 241-259, Springer, Cham 2017, (2017) [Link]
Raddatz, F., Sinapius, M.
Time-of-Flight Calculation in Compllex Structures. In: R. Lammering, U. Gabbert, M. Sinapius, T. Schuster, P. Wierach (Eds.): Lamb-Wave Based Structural Health Monitoring in Polymer Composites
S. 331-356, Springer, Cham 2017, (2017) [Link]
Schmidt, D., Sinapius, M.
Mode Selective Actuator-Sensor-Systems. In: R. Lammering, U. Gabbert, M. Sinapius, T. Schuster, P. Wierach (Eds.): Lamb-Wave Based Structural Health Monitoring in Polymer Composites
S. 401-429, Springer, Cham 2017, (2017) [Link]
Szewieczek, A., Sinapius, M.
Virtual Sensors for SHM. In: R. Lammering, U. Gabbert, M. Sinapius, T. Schuster, P. Wierach (Eds.): Lamb-Wave Based Structural Health Monitoring in Polymer Composites
S. 431-441, Springer, Cham 2017, (2017) [Link]
Heinze, C., Duczek, S., Sinapius, M., Wierach, P.
A minimal model–based approach for the fast approximation of wave propagation in complex structures
Structural Health Monitoring, Vol. 16(5), S. 568–582, (2017) [Link]
2016
L. Reinhardt, T. Siebert, K. Leichsenring, R. Blickhan, M. Böl
Intermuscular pressure between synergistic muscles correlates with muscle force
Journal of Experimental Biology, 219, 2311-2319, (2016) [Link]
M. Schulz, M. Böl
Modeling the quasi-static mechanical behavior of the extensible worm-like chain in the finite-element framework
Proceedings in Applied Mathematics and Mechanics, 16, 393-394, (2016) [Link]
J. Dittmann, D. Töpfer, M. Böl
Experimental-based material parameter identification of oocytes
Proceedings in Applied Mathematics and Mechanics, 16, 79-80, (2016) [Link]
C. Weichert, K. Leichsenring, M. Ernst, C. Wick, T. Siebert, R. Blickhan, M. Böl
Three-dimensional reconstruction of M. gastrocnemius contraction
Proceedings in Applied Mathematics and Mechanics, 16, 111-112, (2016) [Link]
J. Liang, A. Bolea Albero, J. Füller, C. Müller-Goymann, M. Böl
Computational and experimental analysis of wound healing processes
Proceedings in Applied Mathematics and Mechanics, 16, 95-96, (2016) [Link]
A. Bolea Albero, M. Böl
On the modelling of finite growth considering the mechanics of cell division
Proceedings in Applied Mathematics and Mechanics, 16, 925-928, (2016) [Link]
M. Böl, K. Leichsenring, M. Ernst, A. E. Ehret
Long-term mechanical behaviour of skeletal muscle tissue in semi-confined compression experiments
Journal of the Mechanical Behavior of Biomedical Materials, 63, 115-124, (2016) [Link]
K. Dröder, M. Brand, T. Gebken, M. Kühn, M. Böl
Increasing the interlocking effect between metal and FRP by mechanical undercuts
International Journal of Automotive Composites, 2, 316-329, (2016) [Link]
R. Seydewitz, M. Böl
On an electrical-chemical-mechanical approach for modelling smooth muscle excitation in bladder tissue
Proceedings in Applied Mathematics and Mechanics, 16, 393-394, (2016) [Link]
Kunze, J.; Mahrholz,T.; Sinapius, M.
Identification and quantitation of processing parameters controlling the surface quality of carbon fibre-reinforced composites
Journal of Reinforced Plastics and Composites; (2016) [Link]
Exner, Wibke; Kühn, Alexandra; Szewieczek, Artur; Opitz, Mark; Mahrholz, Thorsten; Sinapius, Michael; Wierach, Peter
Determination of volumetric shrinkage of thermally cured thermosets using video-imaging
Polymer Testing (49) pp.100-106, (2016) [Link]
Löbel, T., Holzhüter, D., Sinapius, M., Hühne, C.
A Hybrid Bondline Concept for Bonded Composite Joints
Int. Journal of Adhesion and Adhesives, (2016) [Link]
Haase, T.; Unruh, O.
Active Control of Counter-Rotating Open Rotor Interior Noise in a Dornier 728 Experimental Aircraft: Optimised Sensor Placement
Acts Acoustica United with Acustica, Vol. 102 (2016) 361 – 372, (2016) [Link]
Henneberg, A., Transier, G., Sinapius, M.
Consolidated Fibre Placement (CFP) - adhesive joining of consolidated fibre tapes
Composite Structures, (2016) [Link]
Alekseenko, S. V., Mendig, C., Schulz, M., Sinapius M., Prikhodko, A. A.
An Experimental Study of Freezing of a Supercooled Water Droplet on a Solid Surface
Technical Physics Letters, Vol. 42, No. 5, pp. 524–527, (2016) [Link]
Köke, H.; Weiss, L; Hühne, C.; Sinapius, M.
A graph-based method for calculating draping strategies for the application of fiber-reinforced materials on arbitrary surfaces
Composite Structures, (2016) [Link]
2015
A. Bolea Albero, M. Böl
Mechanics of cell-division: A new continuum model for growth inhomogeneities
Proceedings in Applied Mathematics and Mechanics, 15, 85-86, (2015) [Link]
M. Garcés-Schröder, M. Leester-Schädel, M. Schulz, M. Böl, A. Dietzel
Micro-Gripper: A new concept for a monolithic single-cell manipulation device
Sensors and Actuators A: Physical, 236, 130-139, (2015) [Link]
T. Siebert, K. Leichsenring, C. Rode, C. Wick, N. Stutzig, H. Schubert, R. Blickhan, M. Böl
Three-Dimensional Muscle Architecture and Comprehensive Dynamic Properties of Rabbit Gastrocnemius, Plantaris and Soleus: Input for Simulation Studies
PloS ONE, 10, e0130985 (online), (2015) [Link]
M. Böl, A. E. Ehret, K. Leichsenring, M. Ernst
Tissue-scale anisotropy and compressibility of tendon in semi-confined compression tests
Journal of Biomechanics, 48, 1092-1098, (2015) [Link]
M. Böl, K. Leichsenring, M. Ernst, C. Wick, R. Blickhan, T. Siebert
Novel microstructural findings in m. plantaris and their impact during active and passive loading at macro level
Journal of the Mechanical Behavior of Biomedical Materials, 51, 25-39, (2015) [Link]
F. Sewerin, S. Rigopoulos
A methodology for the integration of stiff chemical kinetics on GPUs
Combustion and Flame, 162(4), 1375–1394, (2015) [Link]
Unruh, Oliver; Blech, Christopher; Monner, Hans Peter
Numerical and Experimental Study of Sound Power Reduction Performance of Acoustic Black Holes in Rectangular Plates
SAE International Journal of Passenger Cars - Mechanical Systems, 8 (3). ISSN 1946-3995, (2015) [Link]
Unruh, Oliver
Parametric Study of Sound Radiation Properties of Complex Vibration Patterns in Rectangular Plates using an Analytical Model
Acta acustica united with Acustica, 101 (4). S. Hirzel Verlag. ISSN 1610-1928, (2015) [Link]
Unruh, O.; Sinapius, M.; Monner, H. P.
Sound Radiation Properties of Complex Modes in Rectangular Plates: A Numerical Study
Acta acustica united with Acustica, Hirzel Verlag, Volume 101, Number 1, January/February 2015, S. 62-72 (11), (2015) [Link]
Szewieczek, Artur; Willberg, Christian; Sinapius, Michael
Virtual Sensors for SHM using Isogeometric Piezoelectric Finite Elements
International Journal of Structural Integrity, 6 (6), Seiten 704-713, (2015) [Link]
Prussak, Robert; Stefaniak, Daniel; Hühne, Christian; Sinapius, Michael
Residual Stresses in Intrinsic UD-CFRP-Steel-Laminates - Experimental Determination, Identification of Sources, Effects and Modification Approaches
Materials Science Forum (825), Seiten 369-376. Trans Tech Publications. ISBN 978-3-03835-515-1. ISSN 0255-5476 (2015) [Link]
Heinze, Christoph; Sinapius, Michael; Wierach, Peter
Lamb Wave Propagation in Complex Geometries - A Minimal Model Approach
Proceedings of the 5th International Workshop on Aircraft System Technologies (AST 2015), Seiten 383-390. Shaker Verlag. (2015) [Link
F. Sewerin, S. Rigopoulos
Integration of stiff chemical kinetics on a CPU-GPU pair - Application to a turbulent, non-premixed flame
Mediterranean Combustion Symposium, Rhodes, Greece, (2015)
Viandier, Aurélie; Stefaniak, Daniel; Schröder, Daniel; Krewer, Ulrike; Hühne, Christian; Sinapius, Michael
Degradation Analysis of Fibre-Metal Laminates under Service Conditions to Predict their Durability
U.P.B. Sci. Bull., Series D, Vol. 1, Iss. 1, 2016, (2015)
2014
A. Bolea Albero, M. Böl
Growing between barriers
Proceedings in Applied Mathematics and Mechanics, 14, 99-100, (2014) [Link]
R. Seydewitz, A. Bolea Albero, M. Böl
A continuum mechanics approach for modelling arbitrary degradation and erosion processes in polymers
Proceedings in Applied Mathematics and Mechanics, 14, 395-396, (2014) [Link]
J. Hellriegel, S. Günther, I. Kampen, A. Bolea Albero, A. Kwade, M. Böl, R. Krull
A biomimetic gellan-based hydrogel as a physicochemical biofilm model
Journal of Biomaterials and Nanobiotechnology, 5, 83-97, (2014) [Link]
A. Bolea Albero, A. E. Ehret, M. Böl
A new approach to the simulation of microbial biofilms by a theory of fluid-like pressure-restricted finite growth
Computer Methods in Applied Mechanics and Engineering, 272, 271-289, (2014) [Link]
M. Böl, A. Bolea Albero
On a new model for inhomogeneous volume growth of elastic bodies
Journal of the Mechanical Behavior of Biomedical Materials, 29, 582-593, (2014) [Link]
M. Böl, A. E. Ehret, K. Leichsenring, C. Weichert, R. Kruse
On the anisotropy of skeletal muscle tissue under compression
Acta Biomaterialia, 10, 3225-3234, (2014) [Link]
M. Misol, T. Haase, H. P. Monner, M. Sinapius
Causal feedforward control of a stochastically excited fuselage structure with active sidewall panel
J. Acoust. Soc. Am., vol. 136 (4), S. 1610-1618, (2014) [Link]
T. Beutel, S. Sattler, Y. El Sayed, M. Schwerter, M. Zander, S. Büttgenbach, M. Leester-Schädel, R. Radespiel, M. Sinapius, P. Wierach
Design of a high-lift experiment in water including active flow control
Smart Materials and Structures, vol. 23 (7), S. 1-10, (2014) [Link]
F. R. S. da Cunha, T. Tobias, R. Degenhardt, M. Sinapius, F. C. de Araújo, R. Zimmermann
A Robustness-Based Design Strategy for Composite Structures
Aircraft Engineering and Aerospace Technology, vol. 86 (4), S. 274-286, (2014) [Link]
F. R. S. da Cunha, T. Wille, R. Degenhardt, M. Sinapius, F. de Araújo, C. Francisco, R. Zimmermann
A robustness-based design strategy for composite structures – probabilistic approach
Aircraft Engineering and Aerospace Technology, vol. 86 (4), S. 262-273, (2014) [Link]
M. Misol, C. Bloch, H. P. Monner, M. Sinapius
Performance of active feedforward control systems in non-ideal, synthesized diffuse sound fields
J. Acoust. Soc. Am., vol. 135 (4), S. 1887–1897, (2014) [Link]
M. Sinapius, H. P. Monner, M. Kintscher, J. Riemenschneider
DLR's Morphing Wing Activities within the European Network
Procedia IUTAM, Volume 10, S. 416-426, (2014) [Link]
Marco Straubel, Martin Zander, Christian Hühne
Design and Sizing of the GOSSAMER Boom Deployment Concept
In Advances in Solar Sailing, Springer Praxis Books, chapter Part III Technology Activities,
pages 593 – 608. Springer-Verlag, 2014, (2014) [Link]
2013
K. Leichsenring, M. Plöthner, M. Böl, R. Blickhan, T. Siebert
Mechanische Eigenschaften der Sehne und Aponeurose des M. Soleus beim Kaninchen
Beiträge zur Bewegungswissenschaft, Band 3, 1-14, (2013) [Link]
R. Seydewitz, M. Böl
Biodegradable polymers - a new modelling approach
Constitutive Models for Rubber VIII, Eds.: N. Gil-Negrete, A. Alomso, Taylor & Francis Group London, 157-162, (2013) [Link]
M. Böl, A. Schmitz
A coupled chemomechanical model for smooth muscle contraction
Computer Models in Biomechanics. From Nano to Macro, Gerhard A. Holzapfel and Ellen Kuhl (Eds.): Springer Netherlands, 63–75, (2013) [Link]
R. Seydewitz, M. Böl
A coupled chemo mechanical model for polymer degradation and erosion processes
Proceedings in Applied Mathematics and Mechanics, 13, 189–190, (2013) [Link]
A. Bolea Albero, M. Böl
On the mechanics of fluid-like growth in solid materials
Proceedings in Applied Mathematics and Mechanics, 13, 59–60, (2013) [Link]
A. E. Ehret, M. Böl
Modelling mechanical characteristics of microbial biofilms by network theory
Journal of the Royal Society Interface, 10, 20120676, (2013) [Link]
P. Schenk, T. Siebert, H. Hiepe, D. Güllmar, J. R. Reichenbach, C. Wick, R. Blickhan, M. Böl
Determination of three-dimensional muscle architectures: Validation of the DTI based fiber tractography method by manual digitization
Journal of Anatomy, 223, 61-68, (2013) [Link]
M. Böl, A. E. Ehret, A. Bolea Albero, J. Hellriegel, R. Krull
Recent advances in mechanical characterisation of biofilm and their significance for material modelling
Critical Reviews in Biotechnology, 33, 145-171, (2013) [Link]
M. Böl, R. Kruse, A. E. Ehret
On a staggered iFEM approach to account for friction in compression testing of soft materials
Journal of the Mechanical Behavior of Biomedical Materials, 27, 204-213, (2013) [Link]
M. Böl, K. Leichsenring, C. Weichert, M. Sturmat, P. Schenk, R. Blickhan, T. Siebert
Three-dimensional surface geometries of the rabbit soleus muscle during contraction - input for biomechanical modelling and its validation
Biomechanics and Modeling in Mechanobiology, 12, 1205-1220, (2013) [Link]
P. Lorsch, S. Algermissen, M. Sinapius
Concepts and Simulated Testing of Active Railway-Wheels
International Journal of Railway Technology, 2 (2), S. 65-78, (2013) [Link]
S. Geier, T. Mahrholz, P. Wierach, M. Sinapius
Carbon nanotube array actuators
Smart Materials and Structures, 22, 094003, (DOI) 10.1088/0964-1726/22/9/094003, (2013) [Link]
E. Kappel, D. Stefaniak, D. Holzhüter, C. Hühne, M. Sinapius
Manufacturing distortions of a CFRP box-structure - A semi-numerical prediction Approach Composites
Part A, (2013) [Link]
M. Kubicka, T. Mahrholz, A. Kühn, P. Wierach, M. Sinapius
Magnetostrictive properties of epoxy resins modified with Terfenol-D particles for detection of internal stress in CFRP
Part 2: evaluation of stress detection, J. Material Science, 48:6578–6584, (2013) [Link]
D. Schmidt, M. Sinapius, P. Wierach
Design of mode selective actuators for Lamb wave excitation in composite plates
CEAS Aeronautical Journal, (2013) [Link]
A. Szewieczek, W. Hillger, M. Sinapius
Virtual sensors for the optimization of a SHM sensor network based on Lamb wave propagation
CEAS Aeronautical Journal, (2013) [Link]
S. Geier, T. Mahrholz, P. Wierach, M. Sinapius
Carbon nanotube-based actuators
In: C. Boller und H. Janocha, New Trends in Smart Technologies,Fraunhofer, S. 39-49. (2013)
2012
R. Kruse, C. Weichert, M. Böl
Elastic properties of muscle tissue: Comparison of an inverse finite element approach and homogeneous deformation
Proceedings in Applied Mathematics and Mechanics, 12, 101-102, (2012) [Link]
M. Sturmat, C. Weichert, T. Siebert, M. Böl
A numerical validation approach of a finite element muscle model using optical data
Proceedings in Applied Mathematics and Mechanics, 12, 127-128, (2012) [Link]
N. Hempel, M. Böl
Multi-phase modeling of shape memory polymers
Proceedings in Applied Mathematics and Mechanics, 12, 331-332, (2012) [Link]
A. Bolea Albero, A. E. Ehret, M. Böl
A continuum model for free growth in living materials
Proceedings in Applied Mathematics and Mechanics, 12, 123-124, (2012) [Link]
A. E. Ehret, A. Bolea Albero, M. Böl
A network model for the EPS matrix of microbial biofilms
Proceedings in Applied Mathematics and Mechanics, 12, 125-126, (2012) [Link]
T. A. Cheema, A. Lichtner, C. Weichert, M. Böl, G. Garnweitner
Fabrication of transparent polymer-matrix nanocomposites with enhanced mechanical properties from chemically modified ZrO2 nanoparticles
Journal of Materials Science, 47, 2665-2674, (2012) [Link]
A. M. Zöllner, O. J. Abilez, M. Böl, E. Kuhl
Stretching skeletal muscle - Eccentric muscle growth through sarcomerogenesis
PloS ONE, 7, e45661 (online), (2012) [Link]
C. Kober, B.-I. Berg, M. Sturmat, J. Rieger, L. Gallo, M. Böl, M. Mack, H.-F. Zeilhofer, R. Sader
Macroscopic muscular modeling based on in vivo 4D-radiology
International Journal for Multiscale Computational Engineering, 10, 131-142, (2012) [Link]
M. Böl, O.J. Abilez, A. N. Assar, C. K. Zarins, E. Kuhl
In vitro/in silico charaterization of active and passive stresses in cardiac muscle
International Journal for Multiscale Computational Engineering, 10, 171-188, (2012) [Link]
M. Böl, A. Schmitz, G. Nowak, T. Siebert
A three-dimensional chemo-mechanical continuum model for smooth muscle contraction
Journal of the Mechanical Behavior of Biomedical Materials, 13, 215-229, (2012) [Link]
M. Böl, R. Kruse, A. E. Ehret, K. Leichsenring, T. Siebert
Compressive properties of passive skeletal muscle - The impact of precise sample geometry on parameter identification in inverse finite element analysis
Journal of Biomechanics, 45, 2673-2679, (2012) [Link]
T. J. Adam, P. Horst, P. Lorsch, M. Sinapius
Experimental investigation of VHCF of polymer composites: Two alternative approaches
Materialpüfung/Materials Testing, 54 (11-12), pp. 734-741, (2012) [Link]
W. Exner, C. Arlt, T. Mahrholz, U. Riedel, M. Sinapius
Nanoparticles with Various Surface Modifications as Functionalized Cross-Linking Agents for Composite Resin Materials
Composites Science and Technology, (2012) [Link]
D. Holzhüter, A. Pototzky, C. Hühne, M. Sinapius
Automated Scarfing Process for Bonded Composite Repairs
Adaptive, Tolerant and Efficient Composite Structures Research Topics in Aerospace, Springer, S. 297-307, ISBN 978-3-642-29189-0, (2012) [Link]
M. Kubicka, T. Mahrholz, A. Kühn, P. Wierach, M. Sinapius
Magnetostrictive properties of epoxy resins modified with Terfenol-D particles for detection of internal stress in CFRP
Part 1: Materials and processes, Journal of Materials Science, 47, S. 5752-5759, Springer, (2012) [Link]
T. Mahrholz, M. Sinapius
Fundamental characterization of epoxy-silica nanocomposites used for the manufacturing of fiber reinforced composites,
Adaptive, Tolerant and Efficient Composite Structures Research Topics in Aerospace, 1., Springer, S. 69-83, ISBN 3642291899, (2012) [Link]
S. Opitz, S. Geier, J. Riemenschneider, H. P. Monner, M. Sinapius
Carbon Nanotube Actuation
Adaptive, Tolerant and Efficient Composite Structures Research Topics in Aerospace, Springer, S. 85-104, ISBN 978-3-642-29189-0, (2012) [Link]
M. Straubel, M. Sinapius
Boom Concept for Gossamer Deployable Space Structures
Adaptive, Tolerant and Efficient Composite Structures, Springer, S. 237-250, ISBN 978-3-642-29189-0, (2012) [Link]
M. Wiedemann, M. Sinapius
Adaptive, Tolerant and Efficient Composite Structures
Research Topics in Aerospace, Springer, ISBN 978-3-642-29189-0, (2012) [Link]
2011
K. Leichsenring, T. Siebert, M. Böl, R. Blickhan
Einfluss von Elastizitäten auf die Bestimmung der aktiven Muskeleigenschaften des M. Soleus beim Kaninchen
Schriften der DVS, Biomechanik - vom Muskelmodell bis zur angewandten Bewegungswissenschaft, Czwalina Verlag, 219, 87-93, (2011) [Link]
M. Sturmat, C. Weichert, M. Böl
Dreidimensionale Skelettmuskelmodellierung auf Basis der Finite-Elemente-Methode
Schriften der DVS, Biomechanik - vom Muskelmodell bis zur angewandten Bewegungswissenschaft, Czwalina Verlag, 219, 123-129, (2011) [Link]
C. Weichert, K. Leichsenring, T. Siebert, R. Blickhan, M. Böl
Passive Muskeleigenschaften – Experiment und Simulation
Schriften der DVS, Biomechanik - vom Muskelmodell bis zur angewandten Bewegungswissenschaft, Czwalina Verlag, 219, 80-86, (2011) [Link]
M. Sturmat, M. Böl
Electromechanical modelling of skeletal muscle contractions
Proceedings in Applied Mathematics and Mechanics, 11, 127-128, (2011) [Link]
C. Weichert, K. Leichsenring, T. Siebert, M. Böl
Passive muscle behaviour - experimental and numerical investigations
Proceedings in Applied Mathematics and Mechanics, 11, 135-136, (2011)
A. Bolea Albero, M. Böl
A finite element model for biofilm volume growth
Proceedings in Applied Mathematics and Mechanics, 11, 351-352, (2011) [Link]
C. Küpper, D. Güllmar, P. Hiepe, T. Siebert, K. Leichsenring, R. Blickhan, M. Böl
3D-Rekonstruktion der Muskelarchitektur bei Oryctolagus Cuniculus - DTI versus Microscripe
Beiträge zur Bewegungswissenschaft, 2, 29-38, (2011) [Link]
A. E. Ehret, M. Böl, M. Itskov
A continuum constitutive model for the active behaviour of skeletal muscle
Journal of the Mechanics and Physics of Solids, 59, 625-636, (2011) [Link]
M. Böl, M. Sturmat, C. Weichert, C. Kober
A new approach for the validation of skeletal muscle modelling using MRI data
Computational Mechanics, 47, 591-601, (2011) [Link]
M. Böl, H. Stark, N. Schilling
On a phenomenological model for fatigue effects in skeletal muscles
Journal of Theoretical Biology, 281, 122-132, (2011) [Link]
A. Schmitz, M. Böl
On a phenomenological model for active smooth muscle contraction
Journal of Biomechanics, 44, 2090-2095, (2011) [Link]
M. Böl, R. Weikert, C. Weichert
A coupled electromechanical model for the excitation-dependent contraction of skeletal muscle
Journal of the Mechanical Behavior of Biomedical Materials, 4, 1299-1310, (2011) [Link]
F. Fisch, F. Sewerin, F. Holzapfel
Approach Trajectory Optimization including a Tunnel Track Constraint
AIAA Atmospheric Flight Mechanics Conference, Portland, Oregon, (2011) [Link]
S. Algermissen, R. Keimer, M. Rose, M. Straubel, M. Sinapius, H. P. Monner
Smart-Structures Technology for Parallel Robots
Journal of Intelligent and Robotic Systems, Vol. 63, S. 547-574, Springer, (2011) [Link]
W. Hillger, A. Szewieczek, D. Schmidt, M. Sinapius
Lamb Wave Techniques for Damage Detection in CFRP-Components - is this really possible?
DEStech Publications, Inc., ISBN 978-1-60595-053-2, (2011) [Link]
D. Könnicke, A. Kühn, T. Mahrholz, M. Sinapius
Polymer nanocomposites based on epoxy resin and ATH as a new flame retardant for CFRP: preparation and thermal characterisation
Journal of Materials Science, Springer Science+Business Media, LLC 2011, 46: 7046–7055 (2011) [Link]
M. Perner, M. Müller, M. Sinapius, H. Beikirch
An Approach for Autonomous Damage Detection by Means of Modal Fingerprints
Journal of Intelligent Material Systems and Structures, 22 (1), S. 93-100, ISBN 1045-389X, (2011) [Link]
S. Walter, W. Steinmann, J. Schütte, G. Seide, T. Gries, G. Roth, P. Wierach, M. Sinapius
Characterisation of piezoelectric PVDF monofilaments
Materials Technology: Advanced Performance Materials, Volume 26, Number 3, pp. 140-145(6), (2011) [Link]
J. Wenzel, M. Sinapius, U. Gabbert
Primary structure mass estimation in early phases of aircraft development using the finite element method
CEAS Aeronautical Journal, (2011) [Link]
2010
R. Seydewitz, M. Böl
A new modelling approach for the description of tissues at cell level
Proceedings in Applied Mathematics and Mechanics, 10, 91-92, (2010) [Link]
M. Sturmat, C. Kober, M. Böl
Experimental and numerical investigations in skeletal muscle modelling
Proceedings in Applied Mathematics and Mechanics, 10, 97-98, (2010) [Link]
A. Bolea Albero, C. Bertsch, M. Böl
3D finite element analysis of biofilm growth considering nutrient diffusion
Proceedings in Applied Mathematics and Mechanics, 10, 283-284, (2010) [Link]
S. Reese, M. Böl, D. Christ
Finite element-based multi-phase modelling of shape memory polymer stents
Computer Methods in Applied Mechanics and Engineering, 199, 1276-1286, (2010) [Link]
M. Böl
Micromechanical modelling of skeletal muscles: From the single fibre to the whole muscle
Archive of Applied Mechanics, 80, 557-567, (2010) [Link]
S. Algermissen, M. Sinapius
Robust Gain Scheduling for Smart-Structures in Parallel Robots
Springer Tracts in Advanced Robotics (STAR), Robotic Systems for Handling and Assembly, 67, Springer, S. 159-174, (2010) [Link]
T. Beutel, M. Leester-Schädel, P. Wierach, M. Sinapius, S. Büttgenbach
Novel Pressure Sensor for Aerospace Purposes
Sensors & Transducers Journal, Vol. 115, Issue 4, April 2010, pp. 11-19, (2010) [Link]
R. Keimer, M. Sinapius
Design and Implementation of Adaptronik Robot Components
Springer Tracts in Advanced Robotics (STAR) Robotic Systems for Handling and Assembly, 67, Springer, S. 413-427, (2010) [Link]
2009
M. Böl, F. E. Gunawan, G. A. Holzapfel
3D finite element analysis of smooth muscle contraction considering calcium diffusion
10th International Conference on Computational Plasticity, 1-4, (2009)
M. Böl, S. Reese
A direction dependent approach to the modeling of shape memory polymers
Constitutive Models for Rubber VI, Eds.: G. Heinrich, M. Kaliske, A. Lion, S. Reese, Taylor & Francis Group London, 443-448, (2009) [Link]
M. Böl, A. Pipetz, S. Reese
Finite element model for the simulation of skeletal muscle fatigue
Material Science and Engineering Technology, 40, 5-12, (2009) [Link]
M. Böl
Modeling muscles from the inside out
Biomedical Computation Review, 5(1), 5-6, (2009) [Link]
M. Böl, S. Reese, K. K. Parker, E. Kuhl
Computational modeling of muscular thin films for cardiac repair
Computational Mechanics, 43, 535-544, (2009) [Link]
M. Böl, R. B. Möhle, M. Haesner, T. R. Neu, H. Horn, R. Krull
3D Finite Element Model of Biofilm Detachment using Real Biofilm Structures from CLSM Data
Biotechnology & Bioengineering, 103(1), 177-186, (2009) [Link]
M. Böl, S. Reese
A finite element approach for the modelling of skeletal muscle fatigue
GAMM Communications, 32(2), 205-220, (2009) [Link]
T. Mahrholz, M. Sinapius , J. Stängle
Quantitation of the reinforcement effect of silica nanoparticles in epoxy resins used in liquid composite moulding processes
Composites Part A, 40 (3), S. 235-243, Elsevier Ltd, (2009) [Link]
S. Pansart, M. Sinapius, U. Gabbert
A comprehensive explanation of compression strength differences between various CFRP materials: Micro-meso model, predictions, parameter studies
Composites Part A, 40 (4), S. 376-387, (2009) [Link]
J. Riemenschneider, S. Opitz, M. Sinapius, H. P. Monner
Modeling of carbon nanotube actuators: Part II - Mechanical properties, electro mechanical coupling and validation of the model
Journal of Intelligent Material Systems and Structures, 20 (3), S. 251-364, Virginia Tech, USA, (2009) [Link]
J. Riemenschneider, S. Opitz, M. Sinapius, H. P. Monner
Modeling of carbon nanotube actuators: Part I - Modeling and Electrical properties
Journal of Intelligent Material Systems and Structures, 20 (2), S. 129-250, Virginia Tech, USA, (2009) [Link]
2008
M. Böl, S. Reese
Micromechanical modelling of shape memory polymers
Advances in Science and Technology, 54, 137-142, (2008) [Link]
M. Böl, S. Reese
Micromechanical modelling of skeletal muscles based on the finite element method
Computer Methods in Biomechanics and Biomedical Engineering, 11, 489-504, (2008) [Link]
2007
S. Reese, M. Böl, D. Christ
Multi-scale problems in biomechanics and medical technology
Proceedings of the ECCOMAS Thematic Conference on Multi-scale Computational Methods for Solids and Fluids, Eds.: A. Ibrahimbegovic, F. Dias, H. Matthies, P. Wriggers, ENS-Cachan, France, 216-220, (2007)
M. Böl, S. Reese
Micromechanical modelling of skeletal muscles: From the single fibre to the whole muscle
Proceedings of the 2nd GAMM Seminar on Continuum Biomechanics, Eds.: W. Ehlers, N. Karajan, Report of the University of Stuttgart, No. II-16, Verlag Glückauf Essen, 1-10, (2007) [Link]
M. Böl, S. Reese
Computer simulations of temperature induced shape memory polymers by means of the finite element method
Constitutive Models for Rubber V, Eds.: A. Boukamel, L. Laiarinandrasana, S. Meo, E. Verron, Taylor & Francis Group London, 93-99, (2007) [Link]
M. Böl, S. Reese
A new approach for the simulation of skeletal muscles using the tool of statistical mechanics
Material Science and Engineering Technology, 38, 955-964, (2007) [Link]
2006
M. Böl, S. Reese
Numerical simulations of rubber-like materials under changing directions
Proceedings of the 3rd European Conference on Computational Mechanics, Paper ID 1440, Lisbon, Portugal, (2006) [Link]
M. Böl, S. Reese
A new approach for the simulation of damage effects in rubber-like materials using chain statistics
Proceedings of the 3rd European Conference on Computational Mechanics, Paper ID 1441, Lisbon, Portugal, (2006) [Link]
M. Böl, S. Reese
Finite element simulations of skeletal muscle behaviour under tetanic and non-tetanic conditions
Journal of Biomechanics, 39, S454, (2006) [Link]
S. Reese, M. Böl
Modelling of new materials in medical technology and biomechanics
Report of the Mathematical Institute Oberwolfach on the Workshop "Mechanics of Materials", Org.: R. Kienzler, D. McDowell, E. Werner, Oberwolfach, Germany, (2006)
S. Reese, M. Böl
Muskelkontraktion im virtuellen Experiment: wenn der Computer die Muskeln spielen lässt
RUBIN, 1/16, 49-56, (2006) [Link]
M. Böl, S. Reese
Finite element modelling of rubber-like polymers based on chain statistics
International Journal of Solids and Structures, 43, 2-26, (2006) [Link]
D. Göge, M. Sinapius
Experiences with dynamic load simulation by means of modal forces in the presence of structural non-linearities
Aerospace Science and Technology, 10, S. 411-419, (2006) [Link]
2005
M. Böl, S. Reese
Computer simulations for the mechanical analysis of skeletal muscles
Proceedings in Applied Mathematics and Mechanics, 5, 291-292, (2005) [Link]
S. Reese, M. Böl
Computational testing and modelling of polymers and soft tissue using chain statistics
Constitutive Models for Rubber IV, Eds.: P. E. Austrell, K. Kari, A. A. Balkema Publishers, 155-164, (2005) [Link]
M. Böl, S. Reese
Simulation of filled polymer networks with reference to the Mullins effect
Constitutive Models for Rubber IV, Eds.: P. E. Austrell, K. Kari, A. A. Balkema Publishers, 165-170, (2005) [Link]
M. Böl, S. Reese, P. Meier, R. Blickhan
Skeletal muscle modeling by means of an innovative finite element technology
Proceedings of the 1st GAMM Seminar on Continuum Biomechanics, Eds.: W. Ehlers, B. Markert, Report of the University of Stuttgart, No. II-14, Verlag Glückauf Essen, 13-23, (2005)
M. Böl, S. Reese
Finite element modelling of rubber-like materials - a comparison between simulation and experiment
Journal of Materials Science, 40, 5933-5939, (2005) [Link]
M. Böl, S. Reese
New method for simulation of Mullins effect using finite element method
Plastics, Rubber and Composites, 34, 343-348, (2005) [Link]
D. Göge, U. Füllekrug, M. Sinapius, M. Link, L. Gaul
Advanced Test Strategy for Identification and Characterization of Nonlinearities of Aerospace Structure
AIAA Journal, Vol. 43 (5), S. 974-9986, (2005) [Link]
D. Göge, M. Sinapius, U. Füllekrug, M. Link
Detection and description of non-linear phenomena in experimental modal analysis via linearity plots
ELSEVIER - International Journal of Non-Linear Mechanics, 40, S. 27-48, (2005) [Link]
2004
M. Böl, S. Reese
Simulation of particle filled polymer networks based on chain statistics under consideration of the Mullins effect
Proceedings in Applied Mathematics and Mechanics, 4, 242-243, (2004) [Link]
G. Gloth, M. Sinapius
Influence and characterisation of weak non-linearities in swept-sine modal testing
Aerospace Science and Technology, 8 (2), S. 111-120, (2004) [Link]
M. Sinapius, A. Brehmer
Measurement of real normal modes with adapted resolution by means of a continuously scanning laser vibrometer
ELSEVIER - Mechanical Systems and Signal Processing, 18 (5), S. 1203-1218, (2004) [Link]
M. Sinapius, G. Gloth
Analysis of swept-sine runs during modal identification
ELSEVIER - Mechanical Systems and Signal Processing, 18 (6), S. 1421-1441. (2004) [Link]
M. Böl, S. Reese
Computer simulation of particle filled polymer networks based on chain statistics with reference to stress-softening effects
Filler Reinforcement of Rubber including all Aspects of Fillers and Filler-Rubber Interactions, The Geological Society, London (UK), IOM Communications Ltd, 17-22, (2004)
2003
M. Böl, S. Reese
Finite element simulation of rubber-like material behaviour under consideration of its microscopic structure
Proceedings in Applied Mathematics and Mechanics, 3, 256-257, (2003) [Link]
S. Reese, M. Böl
On a micromechanically-based finite element simulation of the viscoelastic and damage behaviour of rubber-like polymers
Constitutive Models for Rubber III, Eds.: J. J. C. Busfield, A. H. Muhr, A. A. Balkema Publishers, 213-220, (2003) [Link]
M. Böl, S. Reese
Finite element modelling of polymer networks based on chain statistics
Constitutive Models for Rubber III, Eds.: J. J. C. Busfield, A. H. Muhr, A. A. Balkema Publishers, 203-211, (2003) [Link]
M. Böl, S. Reese
Computer simulation of the inelastic behaviour of polymer networks
7th International Conference on Computational Plasticity, Eds.: E. Onate, D. R. J. Owen, Barcelona, Spain, (2003)
2001
U. Füllekrug, M. Sinapius
Force Measurement in Vibration Testing - Applications to Modal Identification
International Journal of Acoustics and Vibration, 6 (2), S. 51-56, (2001) [Link]
G. Gloth, M. Degener, U. Füllekrug, J. Gschwilm, M. Sinapius, P. Fargette, B. Levadoux, P. Lubrina
Experimental Investigation of new GVT Concepts for Large Aircraft
Sound and Vibration, 35 (11), S. 14-18, (2001) [Link]
2026
R. H. Deo, J. Liu, T. Siebert, M. Böl
Multi-phase field approach for modelling fracture propagation in multi-component tissues
Journal of the Mechanics and Physics of Solids, 106399, (2026) [Link]
M. R. Kardooni, J. Liu, Z. Kozanecka, R. Krull, M. Böl
On a new approach to describing soft pellets of filamentous cultivated in shake flasks under turbulent flow conditions
Biochemical Engineering Journal, 225, 109942, (2026) [Link]
2025
Bernd-Christian Hölscher
Voraussetzungen der Existenz frequenzunabhängiger Schalleinstrahlungsformen
Springer (2025) [Link]
O. Alalul, J. Liu, M. Böl, A. Al-Halhouli, A. Dietzel
Oocyte Biomechanics Using a Microdevice to Correlate Transients of Micro-Flow Impedance and Electrical Impedance
23rd International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers), 1307-1310, (2025) [Link]
R. Mitkus, V. Kesminas, M. Böl
Experimental investigation of sensitivity changes during encapsulation of piezoelectric composite materials
Scientific Reports, 15, 31738, (2025) [Link]
M. Borsdorf, S. Papenkort, M. Böl. T. Siebert
Biaxial determination of active and passive mechanical properties of porcine stomach smooth muscle tissue
submitted (2025)
S. Kiem, S. Papenkort, M. Borsdorf, M. Böl, T. Siebert
Influence of different preconditioning protocols on the active and passive force generation of urinary smooth muscle
submitted (2025)
C. Bremer, J. Kube, M. Sinapius, O. Völkerink, Y. Mizutani, M. Böl
Pultruded CFRP sensors for structural stiffening and linear piezoresistive strain sensing in GFRP
Composites Part C: Open Access, 18, 100681 (2025) [Link]
M. Böl, K. Leichsenring, S. Kutschke, F. Walter, T. Siebert
Age-dependent properties of the rabbit calf musculature - relationship between mechanic and microstructure
Journal of the Mechanical Behavior of Biomedical Materials, 168, 107008, (2025) [Link]
Q. Liu, J. Liu, S. Kutschke, V. Kosmalla, D. Schürenkamp, N. Goseberg, M. Böl
Seasonal mechanical behaviour of Elymus spec. for the assessment of ecosystem services
Forces in Mechanics, 19, 100313, (2025) [Link]
S. Kiem, S. Papenkort, M. Borsdorf, M. Böl, T. Siebert
Reproducibility of smooth muscle mechanical properties in consecutive stretch and activation protocols
European Journal of Physiology, 477, 729-739, (2025) [Link]
J. Geldner, S. Papenkort, S. Kiem, M. Böl, T. Siebert
Active and passive material response of urinary bladder smooth muscle tissue in uniaxial and biaxial tensile testing
Acta Biomaterialia, 193, 255-266, (2025) [Link]
C. Krautwald, C. Schweiger, J. Liu, C. Windt, D. Schürenkamp, M. Böl, N. Goseberg
Wave-induced wake dynamics of cylinders with surrogates of marine biofouling
submitted (2025)
F. Neumann, F. Cerbe, M. Sinapius
From Material to Solution: Implementing Shape Memory Behavior of Thermoplastic Polymers in Commercial FEA Software for Structural Analysis
Journal of Manufacturing and Material Processing, 9(3), 73, (2025) [Link]
Z.Kozanecka, J.Liu, Q. Liu, H.Buch, J. Gebauer, D. Rasch, M. Böl, R. Krull
Increased labyrinthopeptin A1 production is associated with changes in oxygen supply, density and elasticity of Actinomadura namibiensis pellets
Biochemical Engineering Journal, 220, 109747, (2025) [Link]
R. Mitkus, M. Böl
On the manufacturing of potassium sodium niobate piezoceramics with low viscosity slurry via digital light processing using high refractive index monomers
The International Journal of Advanced Manufacturing Technology, 141, 3211–3223, (2025) [Link]
F. Cerbe, D. Mahlstedt, M. Sinapius, C. Hühne, M. Böl
Relationship between programming stress and residual strain in FDM 4D printing
Progress in Additive Manufacturing, 9, 123-132, (2024) [Link]
J. Wiedemann, S. Mrzljak, J. Koord, C. Hühne, F. Walther
Modified cure cycles for increased fatigue performance of fiber metal laminates
Composite Structures, 351, 118631, (2024) [Link]
J. Liu, Q. Liu, S. Kutschke, V. Kosmalla, D. Schürenkamp, N. Goseberg, M. Böl
Seasonal variations in biomechanical properties of Elymus Species: Implications for Assessing Coastal Ecosystem Services
Proceedings in Applied Mathematics and Mechanics, 24, e202400088, (2024) [Link]
Q. Liu, J. Liu, Z. Kozanecka, R. Krull, M. Böl
Morphological and mechanical properties of filamentous pellets during the cultivation process
Proceedings in Applied Mathematics and Mechanics, 24, e202400089, (2024) [Link]
P. Meyer, M. Sprengholz, H. Traub, C. Hühne
Adaptive-Stiffness Characteristics of Pneumatic Rotary Actuators for Folding Wingtips
ASME 2024 Aerospace Structures, Structural Dynamics, and Materials Conference, (2024) [Link]
M. Borsdorf, S. Papenkort, M. Böl, T. Siebert
Influence of muscle packing on the three-dimensional architecture of rabbit M. plantaris
Journal of the Mechanical Behavior of Biomedical Materials, 106762, (2024) [Link]
J. Wiedemann, S. Mrzljak, C. Hühne, F. Walther
Increased accuracy of service life prediction for fiber metal laminates by consideration of the manufacturing-induced residual stress state
Proceedings of the 10th European Workshop on Structural Health Monitoring (EWSHM 2024), (2024) [Link]
M. Hoppstädter, K. Linka, E. Kuhl, M. Schmicke, M Böl
Machine learning reveals relations between brain age and mechanics
Acta Biomaterialia, 190, 362-378, (2024) [Link]
M. Böl, K. Leichsenring, S. Kohn, A. E. Ehret
The anisotropic and region-dependent mechanical response of wrap-around tendons under tensile, compressive and combined multiaxial loads
Acta Biomaterialia, 183, 157-172, (2024) [Link]
L. Poppa, L. Frerichs, J. Liu, M. Böl
Development and implementation of a damage model for potato tuber blackspot in discrete element method to analyze harvesting and handling processes
Journal of the ASABE, 67, 517-524, (2024) [Link]
S. Papenkort, M. Borsdorf, S. Kiem, M. Böl, T. Siebert
Regional differences in stomach stretch during organ filling and their implications on the mechanical stress response
Journal of Biomechanics, 168, 112107, (2024) [Link]
L. Gahleitner, G. Thummerer, B. Blank, J. Wiedemann, G. Mayr, C. Hühne, P. Burgholzer, U. Cakmak
Photothermal defect imaging in hybrid fiber metal laminates using the virtual wave concept
Journal of Applied Physics, 135, 7, (2024) [Link]
O. Steffen, P. Meyer, C. Hühne
Natural laminar flow leading edge: Requirements, design, and experimental validation under operational loads
Aerospace Science and Technology, 146, 108913, (2024) [Link]
M. Borsdorf, S. Papenkort, M. Böl, T. Siebert
Influence of muscle length on the three-dimensional architecture and aponeurosis dimensions of rabbit calf muscles
Journal of the Mechanical Behavior of Biomedical Materials, 152, 106452, (2024) [Link]
T. Rothe, S. Gantner, N. Hack, C. Hühne
A Dynamic Winding Process of individualized fibre reinforcement structures for Additive Manufacturing in Construction
Open Conference Proceedings, Vol. 3, (2023) [Link]
J. Wiedemann, T. Barth, T. Roloff, T. Kluge, N. Rauter, C. Hühne
Influence of residual stresses on the dispersion behavior of guided ultrasonic waves in fiber metal laminates
Proceedings of the Fourteenth International Workshop on Structural Health Monitoring (IWSHM), (2023) [Link]
J. Wiedemann, P. Meyer, J. Feder, M. Sinapius, J. Riemenschneider, C. Hühne
Electromechanical Deicing of Helicopter Structures with Integrated Ice Detection by Impedance Measurement
Journal of Aerospace Engineering, 37, 04023094, (2023) [Link]
P. Meyer, J. Finder, C. Hühne
Test Methods for the Mechanical Characterization of Flexure Hinges
Experimental Mechanics, 63, 1203–1222, (2023) [Link]
P. Meyer, C. Hühne, K. Bramsiepe, W. Krüger
Aeroelastic Analysis of Actuated Adaptive Wingtips Based on Pressure Actuation
Journal of Aircraft, Article in Advance, (2023) [Link]
P. Meyer, M. Vorhof, J. Koord, C. Sennewald, C. Cherif, C. Hühne
Anisotropic flexure hinges: Manufacturing and mechanical characterization for application in pressure-actuated morphing structures
Composites Part B: Engineering, 266, 110967, (2023) [Link]
F. Walter, R. Seydewitz, P. Mitterbach, T. Siebert, M. Böl
On a three-dimensional model for the description of the passive characteristics of skeletal muscle tissue
Biomechanics and Modeling in Mechanobiology, 22, 1499–1514, (2023) [Link]
M. Rottmann, T. Roloff, N. Rauter, L. Rittmeier, M. Sinapius, W. E. Weber
A numerical study on planar gradient acoustic impedance matching for guided ultrasonic wave detection
Journal of Vibration and Control, 0, 10775463221149764, (2023) [Link]
T. Rothe, J. Pösch, S. Gantner, N. Hack, C. Hühne
Optimization of tensile properties and bond behaviour to concrete of fibre reinforcement strands produced within a dynamic fibre winding process
11th International Conference on Fiber-Reinforced Polymer (FRP) Composites in Civil Engineering (CICE 2023), Rio de Janeiro, Brazil, (2023) [Link]
H. Thölking, F. Cerbe, M. Sinapius
Analytical-numerical simulation of 4D-structures printed with FDM
Materials Today: Proceedings, (2023) [Link]
T. Barth, J. Wiedemann, T. Roloff, T. Behrens, N. Rauter, C. Hühne, M. Sinapius, R. Lammering
Experimental determination of dispersion diagrams over large frequency ranges for guided ultrasonic waves in fiber metal laminates
Smart Materials and Structures, 32, 085011, (2023) [Link]
T. Barth, J. Wiedemann, T. Roloff, C. Hühne, M. Sinapius, N. Rauter
Investigations on Guided Ultrasonic Wave Dispersion Behavior in Fiber Metal Laminates Using Finite Element Eigenvalue Analysis
Proceedings in Applied Mathematics & Mechanics, 23, e202200149, (2023) [Link]
M. Goutier, K. Hilbig, T. Vietor, M. Böl
Process Parameters and Geometry Effects on Piezoresistivity in Additively Manufactured Polymer Sensors
Polymers, 15, 2159, 1-15, (2023) [Link]
A. Kyriazis, S. Charif, K. Rager, A. Dietzel, M. Sinapius
A Parametric Model for the Analysis of the Impedance Spectra of Dielectric Sensors in Curing Epoxy Resins
Sensors, 23, (2023) [Link]
S. Papenkort, M. Borsdorf, T. Siebert, M. Böl
A geometry model of the porcine stomach featuring mucosa and muscle layer thicknesses
Journal of the Mechanical Behavior of Biomedical Materials, 142, 105801, (2023) [Link]
L. Rittmeier, N. Rauter, A. Mikhaylenko, R. Lammering, M. Sinapius,
The Guided Ultrasonic Wave Oscillation Phase Relation Between the Surfaces of Plate-like Structures of Different Material Settings
Acoustics 2023, 5, 136–164, (2023) [Link]
R. Mitkus, L. Piechowiak, M. Sinapius
Characterization of UV Light Curable Piezoelectric 0-0-3 Composites Filled with Lead-Free Ceramics and Conductive Nanoparticles
Journal of Composite Science, 7, 89, (2023) [Link]
A. Zarinwall, R. Mitkus, A. Marth, V. Maurer, M. Sinapius, G. Garnweitner
Processing of 3-(Trimethoxysilyl)propyl Methacrylate (TMSPM) Functionalized Barium Titanate/Photopolymer Composites: Functionalization and Process Parameter Investigation
Journal of Composite Science, 7, 47, (2023) [Link]
J. Liu
Characterisation of the Mechanical Properties of Heat-Induced Protein Deposits in Immersed Cleaning Systems
Springer, (2023) [Link]
L. Klemm, R. Seydewitz, T. Siebert, M. Böl
Three-dimensional multi-field modelling of gastric arrhythmias and their effects on antral contractions
Computers in Biology and Medicine, 153, 106488, (2023) [Link]
J. N. Haus, W. Lang, T. Roloff, L. Rittmeier, S. Bornemann, M. Sinapius, A. Dietzel
MEMS Vibrometer for Structural Health Monitoring Using Guided Ultrasonic Waves
Sensors, 22, 5368, (2022) [Link]
R. Mitkus, M. Sinapius
Piezoelectric Ceramic/Photopolymer Composites Curable with UV Light: Viscosity, Curing Depth, and Dielectric Properties
Journal of Composites Science, 6, 212, (2022) [Link]
R. Mitkus, F. Cerbe, M. Sinapius
Book chapter: 4D printing electro-induced shape memory polymers
in Smart Materials in Additive Manufacturing, 2, 19-51, (2022) [Link]
F. Cerbe, M. Sinapius, M. Böl
Methodology for FDM 4D printing with thermo-responsive SMPs
Materials Today: Proceedings, (2022) [Link]
J. Wiedemann, J.-U. R. Schmidt, C. Hühne
Applicability of Asymmetric Specimens for Residual Stress Evaluation in Fiber Metal Laminates
Journal of Composites Science 2022, 6, 329, (2022) [Link]
T. Roloff, R. Mitkus, J. N. Lion, M. Sinapius
3D-Printable Piezoelectric Composite Sensors for Acoustically Adapted Guided Ultrasonic Wave Detection
Sensors, 22, 6964, (2022) [Link]
A. Kyriazis, C. Pommer, D. Lohuis, K. Rager, A. Dietzel, M. Sinapius
Comparison of Different Cure Monitoring Techniques.
Sensors 2022, 22, (2022) [Link]
L. Rittmeier, T. Roloff, N. Rauter, A. Mikhaylenko, J. N. Haus, R. Lammering, A. Dietzel, M. Sinapius
Influence of a Flat Polyimide Inlay on the Propagation of Guided Ultrasonic Waves in a Narrow GFRP-Specimen
Materials, 15, 6752, (2022) [Link]
M. Schulz
A New Kirchhoff-Love Beam Element and its Application to Polymer Mechanics
Springer, (2022) [Link]
C. von der Heide, J. Steinmetz, O. Völkerink, P. Makiela, C. Hühne, M. Sinapius, A. Dietzel
Polyetherimide-Reinforced Smart Inlays for Bondline Surveillance in Composites
Polymers 2022, 14, 3816, (2022) [Link]
H. Schlums, C. Hühne, M. Sinapius
Design of a Herringbone-Grooved Bearing for Application in an Electrically Driven Air Compressor
Machines 2022, 10, 662, (2022) [Link]
M. Schutzeichel, T. Strübing, O. Tamer, T. Kletschkowski, H. Monner, M. Sinapius
Experimental and Numerical Investigation of a Multifunctional CFRP towards Heat Convection under Aircraft Icing Conditions
Applied Mechanics 2022, 3, 995-1018, (2022) [Link]
J. Wiedemann, R. Prussak, E. Kappel, C. Hühne
In-situ quantification of manufacturing-induced strains in fiber metal laminates with strain gages
Composite Structures 297, 115967, (2022) [Link]
P. Meyer, H. Traub, C. Hühne
Actuated adaptive wingtips on transport aircraft: Requirements and preliminary design using pressure-actuated cellular structures
Aerospace Science and Technology 128, 107735, (2022) [Link]
O. Tamer, F. Walter, M. Sinapius, M. Böl
A computational geometric parameter optimisation of the thermomechanical deicing concept
Actuators 2022 , 11, 223, (2022) [Link]
R. Trostorf, E. Morales Orcajo, A. Pötzke, T. Siebert, M. Böl
A pilot study on active and passive ex vivo characterisation of the urinary bladder and its impact on three-dimensional modelling
Journal of the Mechanical Behavior of Biomedical Materials, 133, 105347, (2022) [Link]
L. Klemm, R. Seydewitz, M. Böl
Three-dimensional multi-scale modelling of electro-chemomechanical gastric smooth muscle contraction
Solid (Bio)mechanics: Challenges of the Next Decade, Studies in Mechanobiology, Tissue Engineering and Biomaterials, G. Sommer et al. (eds.): Springer Nature Switzerland, 299-331, (2022) [Link]
H. Schmiedeke, J. Sick, M. Sinapius
Experimental Investigation of Two Switching States of an Active Foil Bearing during Start-Up
Machines, 10, (2022) [Link]
M. Neitmann, T. Rothe, E. Kappel, C. Hühne
Assembly of Compliant Structures with Autonomous Industrial Mobile Manipulators (AIMM) Using an End Effector with Active Deformation Compensation for the Assembly of Flaps
Machines 2022, 10, 291, (2022) [Link]
M. Hoppstädter, D. Püllmann, R. Seydewitz, E. Kuhl, M. Böl
Correlating the microstructural architecture and macrostructural behaviour of the brain
Acta Biomaterialia, 151, 379-395, (2022) [Link]
P. Scholle, M. Sinapius
Influence of the electrical anisotropy of unidirectional carbon fibre reinforced plastics on their self strain sensing properties
Composites Part C: Open Access, 100256, (2022) [Link]
K. Karimian, R.Seydewitz, D. Töpfer, M. Böl
Poro-viscoelastic behaviour of the zona pellucida: Impact of three-dimensional modelling on material characterisation
Journal of the Mechanical Behavior of Biomedical Materials, 131, 105211, (2022) [Link]
M. Böl, S. Kohn, K. Leichsenring, E. Morales-Orcajo, A. E. Ehret
On multiscale tension-compression asymmetry in skeletal muscle
Acta Biomaterialia, 144, 210-220, (2022) [Link]
U. Römer, J. Liu, M. Böl
Surrogate-based Bayesian calibration of biomechanical models with isotropic material behavior
International Journal for Numerical Methods in Biomedical Engineering, 38, 4, e3575, (2022) [Link]
M. Bahar, M. Brysch, M. Sinapius
In Situ Consolidation of Thermoplastic Prepreg by Generating Harmonic Oscillations on the Consolidation Roller
Journal of Composites Science 2022, 6, 1, (2022) [Link]
A. Kyriazis, J. Feder, K. Rager, C. von der Heide, A. Dietzel, M. Sinapius
Reducing the Weakening Effect in Fibre-Reinforced Polymers Caused by Integrated Film Sensors
Journal of Composites Science, 5, (2021) [Link]
P. Scholle, S. Rüther, M. Sinapius
Comparison of Electrical Contacting Techniques to Carbon Fiber Reinforced Plastics for Self-Strain-Sensing Applications
C 2021, 7, 81, (2021) [Link]
P. Scholle, M. Sinapius
Measurement of Two-Dimensional Electrical Potential Fields in CFRP using Four-Probe Resistance Scans
Journal of Physics Communications, (2021) [Link]
R. Mitkus, M. Scharfnofske, M. Sinapius
Characterization 0.1 wt.% Nanomaterial/Photopolymer Composites with Poor Nanomaterial Dispersion: Viscosity, Cure Depth and Dielectric Properties
Polymers, 13, 3948, (2021) [Link]
R. Mitkus, A. Alashkar, M. Sinapius
An Attempt to Topology Optimize 3D Printed Piezoelectric Composite Sensors for Highest D31 Output
Conference SMASIS2021, V001T06A006, (2021) [Link]
T. Roloff, R. Mitkus, J. Lion, M. Sinapius
3D printable piezoelectric composite sensors for guided ultrasonic wave detection
Engineering Proceedings, 10, 36, (2021) [Link]
K. Leichsenring, A. Viswanathan, S. Kutschke, T. Siebert, M. Böl
Age-dependent mechanical and microstructural properties of the rabbit soleus muscle
Acta Biomaterialia, 134, 453-465, (2021) [Link]
M. Vorhof, C. Sennewald, P. Schegner, P. Meyer, C. Hühne, C. Cherif, M. Sinapius
Thermoplastic Composites for Integrally Woven Pressure Actuated Cellular Structures: Design Approach and Material Investigation
Polymers 13, 3128, (2021) [Link]
F. Walter, M. Sinapius
Influence of Aerodynamic Preloads and Clearance on the Dynamic Performance and Stability Characteristic of the Bump-Type Foil Air Bearing
Machines 2021, 9, 178, (2021) [Link]
M. Sprengholz, H. Traub, M. Sinapius, S. Dähne, C. Hühne
Rapid transformation of lamination parameters into stacking sequences
Composite Structures, 276, (2021) [Link]
J. Liu, M. Böl
Experimental characterisation of the mechanical failure behaviour of whey protein gel treated with sodium hydroxide
Food and Bioproducts Processing, 130, 94-104, (2021) [Link]
S. Papenkort, M. Böl, T. Siebert
Architectural model for muscle growth during maturation
Biomechanics and Modeling in Mechanobiology 20, 2031–2044, (2021) [Link]
S. Nagaraja, K. Leichsenring, M. Ambati, L. De Lorenzis, M. Böl
On a phase-field approach to model fracture of small intestine walls
Acta Biomaterialia, 130, 317-331, (2021) [Link]
H.N.R. Wagner, G. Niewöhner, A. Pototzky, C. Hühne
On the imperfection sensitivity and design of tori-spherical shells under external pressure
International Journal of Pressure Vessels and Piping, Volume 191, 104321, (2021) [Link]
S. Niemann, H.N.R. Wagner, C. Hühne
Anisogrid stiffened panel under axial compression: Manufacturing, numerical analysis and experimental testing
Thin-Walled Structures, Volume 161, 107483, (2021) [Link]
N. Hack, M. Bahar, C. Hühne, W. Lopez, S. Gantner, N. Khader, T. Rothe
Development of a Robot-Based Multi-Directional Dynamic Fiber Winding Process for Additive Manufacturing Using Shotcrete 3D Printing
Fibers 2021, 9, 39, (2021) [Link]
C. von der Heide, J. Steinmetz, M.J. Schollerer, C. Hühne, M. Sinapius, A. Dietzel
Smart Inlays for Simultaneous Crack Sensing and Arrest in Multifunctional Bondlines of Composites
Sensors, 21, 3852, (2021) [Link]
M. Borsdorf, M. Böl, T. Siebert
Influence of layer separation on the determination of stomach smooth muscle properties
European Journal of Physiology, 473, 911-920, (2021) [Link]
J. Liu, S. Kutschke, K. Keimer, V. Kosmalla, D. Schürenkamp, N. Goseberg, M. Böl
Experimental characterisation and three-dimensional modelling of Elymus for the assessment of ecosystem services
Ecological Engineering, 166, 106233, (2021) [Link]
P. Scholle, M. Sinapius
A Review on the Usage of Continuous Carbon Fibers for Piezoresistive Self Strain Sensing Fiber Reinforced Plastics
Journal of Composites Science 2021, 5, 96, (2021) [Link]
P. Meyer, S. Lück, T. Spuhler, C. Bode, C. Hühne, J. Friedrichs, M. Sinapius
Transient Dynamic System Behavior of Pressure Actuated Cellular Structures in a Morphing Wing
Aerospace, 8, 89, (2021) [Link]
A. Stracuzzi, J. Dittmann, M. Böl, A. E. Ehret
Visco- and poro-elastic contributions of the zona pellucida to the mechanical response of oocytes
Biomechanics and Modeling in Mechanobiology, 20, 751-765, (2021) [Link]
M. Böl, K. Schrinner, S. Tesche, R. Krull
Challenges of influencing cellular morphology by morphology engineering techniques and mechanical induced stress on filamentous pellet systems - a critical review
Engineering in Life Sciences, 21, 51-67, (2021) [Link]
S. Kohn, K. Leichsenring, R. Kuravi, A. E. Ehret, M. Böl
Direct measurement of the direction-dependent mechanical behaviour of skeletal muscle extracellular matrix
Acta Biomaterialia, 122, 249-262, (2021) [Link]
R. Kuravi, K. Leichsenring, R. Trostorf, E. Morales-Orcajo, M. Böl, A. E. Ehret
Predicting muscle tissue response from calibrated component models and histology-based finite element models
Journal of the Mechanical Behavior of Biomedical Materials, 117, 104375, (2021) [Link]
J. Steinmetz, T. Löbel, O. Völkerink, C. Hühne, M. Sinapius, C. von der Heide, A. Dietzel
The Working Principles of a Multifunctional Bondline with Disbond Stopping and Health Monitoring Features for Composite Structures
Journal of Composites Science 2021, 5, 51, (2021) [Link]
A. Kyriazis, R. Kilian, M. Sinapius, K. Rager, A. Dietzel
Tensile Strength and Structure of the Interface between a Room-Curing Epoxy Resin and Thermoplastic Films for the Purpose of Sensor Integration
Polymers, 13, (2021) [Link]
H. Schmiedeke, M. Sinapius, N. Prechavut
Experimental Investigation of the Leaf Type Bearing Structure with Undersprings Under Dynamic Excitation
Machines, 9, (2021) [Link]
H. Watschke, M. Goutier, J. Heubach, T. Vietor, K. Leichsenring, M. Böl
Novel resistive sensor design utilizing the geometric freedom of additive manufacturing
Applied Science, 11, 113-128, (2021) [Link]
R. Trostorf, E. Morales-Orcajo, T. Siebert, M. Böl
Location- and layer-dependent biomechanical and microstructural characterisation of the porcine urinary bladder wall
Journal of the Mechanical Behavior of Biomedical Materials, 115, 104275, (2021) [Link]
R. Kuravi, K. Leichsenring, M. Böl, A. E. Ehret
3D finite element models from serial section histology of skeletal muscle tissue - The role of micro-architecture on mechanical behavior
Journal of the Mechanical Behavior of Biomedical Materials, 113, 104109, (2021) [Link]
J. Liu, M. Helbig, J.-P. Majschak, M. Böl
Whey protein gel - experimental testing and modelling of wire cutting
Journal of Food Engineering, 292, 110324, (2021) [Link]
L. Brimmers, K. Endriß, R. Trostorf, M. Böl, M. Schmicke
Endocrine characterization of pigs with different coping styles under varying housing conditions
submitted, (2021)
J. Liu, A. Mildner, J. Großeheilmann, M. Böl
Polymerized Ionic Liquids (PILs)-based hydrogels with extremely high mechanical strength
submitted, (2021)
S.K. Sharma, V.S. Chauhan, M. Sinapius
A review on deformation-induced electromagnetic radiation detection: history and current status of the technique
Journal of Materials Science, 56, 4500–4551, (2020) [Link]
S. Papenkort, M. Böl, T. Siebert
Three-dimensional muscle architecture of rabbit M. soleus during growth
Journal of Biomechanics, 112, 110054, (2020) [Link]
A. Kyriazis, A. Kais, M. Sinapius, K. Rager, A. Dietzel
Adhesion of Multifunctional Substrates for Integrated Cure Monitoring Film Sensors to Carbon Fiber Reinforced Polymers
Journal of Composites Science, 4, (2020) [Link]
C. Pommer, M. Sinapius
Proof of Concept for Pultrusion Control by Cure Monitoring Using Resonant Ultrasound Spectroscopy
Journal of Composites Science, 4, 115, (2020) [Link]
P. Schenk, S. Papenkort, M. Böl, T. Siebert, R. Grassme, C. Rode
A simple geometrical model accounting for 3D muscle architectural changes across muscle lengths
Journal of Biomechanics, 103, 109694, (2020) [Link]
R. Rockenfeller, M. Günther, N. Stutzig, D. Haeufle, T. Siebert, S. Schmitt, K. Leichsenring, M. Böl, T. Götz
Exhaustion of skeletal muscle fibers within seconds: incorporating phosphate kinetics into a Hill-type model
Frontiers in Physiology, Striated Muscle Physiology, 11, 306, (2020) [Link]
M. Bauer, E. Morales-Orcajo, L. Klemm, R. Seydewitz, V. Fiebach, T. Siebert, M. Böl
Biomechanical and microstructural characterisation of the porcine stomach wall: Location- and layer-dependent investigations
Acta Biomaterialia, 102, 83-99, (2020) [Link]
M. Böl, R. Seydewitz, K. Leichsenring, F. Sewerin
A phenomenological model for the inelastic stress-strain response of a potato tuber
Journal of the Mechanics and Physics of Solids, 137, 103870, (2020) [Link]
L. Klemm, R. Seydewitz, M. Borsdorf, T. Siebert, M. Böl
On a coupled electro-chemomechanical model of gastric smooth muscle contraction
Acta Biomaterialia, 109, 163-181, (2020) [Link]
J. Liu, H. Wiese, W. Augustin, S. Scholl, M. Böl
Mechanical comparison of milk and whey protein isolate fouling deposits using indentation testings
Food and Bioproducts Processing, 122, 145-158, (2020) [Link]
C. Lüders
Nonlinear-Elastic Orthotropic Material Modeling of an Epoxy-Based Polymer for Predicting the Material Behavior of Transversely Loaded Fiber-Reinforced Composite
Journal of Composites Science, 4, 46, (2020) [Link]
C. Lüders, G. Kalinka, W. Li, M. Sinapius, T. Wille
Experimental and numerical multiscale approach to thermally cycled FRP
Composite Structures, Volume 244, (2020) [Link]
H. Sadri, A. Kyriazis, H. Schlums, M. Sinapius
On modeling the static shape control of an adaptive air foil bearing
Smart Materials and Structures, Volume 29, 085043, (2020) [Link]
S. Taleb, L. Rittmeier, M. Sinapius, F. Boubenider, D. Schmidt
Experimental Study of Lamb Waves Propagation inside an Impact Damage in the Size of the Used Wavelength
Russian Journal of Nondestructive Testing, Volume 56, 2, 141–150, (2020) [Link]
O. Tamer, A. Kyriazis, M. Sinapius
Parameter study and experimental analysis of a thermo-mechanical de-icing concept
Smart Materials and Structures, Volume 29, 045021, (2020) [Link]
P. Wierach, S. Petersen, M. Sinapius
Design and Experimental Characterization of an Actuation System for Flow Control of an Internally Blown Coanda Flap
Aerospace, 7, (2020) [Link]
M. Böl, R. Iyer, M. Garces-Schröder, S. Kohn, A. Dietzel
Mechano-geometrical skeletal muscle fibre characterisation under cyclic and relaxation loading
Journal of the Mechanical Behavior of Biomedical Materials, 101, 104001, (2020) [Link]
S. Papenkort, M. Böl, T. Siebert
Three-dimensional muscle architecture of rabbit M. soleus during growth
Journal of Biomechanics, 112, 110054, (2020) [Link]
M. Schulz, M.Böl
A finite element formulation for a geometrically exact Kirchhoff-Love beam based on constrained translation
Computational Mechanics, 64, 1155-1175, (2019) [Link]
M. Borsdorf, A. Tomalka, N. Stutzig, E. Morales Orcajo, M. Böl, T. Siebert
Locational and directional dependencies of smooth muscle properties in pig urinary bladder
Frontiers in Physiology, 10, 63, (2019) [Link]
M. Schulz, J. Dittmann, M. Böl
Modeling the mechanical behavior of semi-flexible polymer chains using a surrogate model based on a finite-element approach to Brownian polymer dynamics
Journal of the Mechanics and Physics of Solids, 130, 101-117, (2019) [Link]
R. Seydewitz, T. Siebert, M. Böl
On a three-dimensional constitutive model for history effects in skeletal muscles
Biomechanics and Modeling in Mechanobiology, 18, 1665-1681, (2019) [Link]
M. Böl, R. Iyer, J. Dittmann, M. Garcés-Schröder, A. Dietzel
Investigating the passive mechanical behaviour of skeletal muscle fibres: Micromechanical experiments and Bayesian hierarchical modelling
Acta Biomaterialia, 92, 277-289, (2019) [Link]
J. Dittmann, S. Tesche, R. Krull, M. Böl
The influence of salt-enhanced cultivation on the micromechanical behaviour of filamentous pellets
Biochemical Engineering Journal, 148, 65-76, (2019) [Link]
M. Garcés-Schröder, T. Zimmermann, C. Siemers, M. Leester-Schädel, M. Böl, A. Dietzel
Shape memory alloy actuators for silicon microgrippers
Journal of Microelectromechanical Systems, 28, 869-881, (2019) [Link]
A. E. Ehret, M. Böl
Recent topics in biomechanics and mechanobiology
GAMM Mitteilungen, 1, (2019) [Link]
F. Sewerin, S. Rigopoulos
Algorithmic aspects of the LES-PBE-PDF method for modeling soot particle size distributions in turbulent flames
Combustion Science and Technology, 1-31, (2019) [Link]
F. Sewerin
On the local identifiability of constituent stress-strain laws for hyperelastic composite materials
Computational Mechanics, (2019) [Link]
J. Liu, H. Wiese, W. Augustin, S. Scholl, M. Böl
Comparison of the mechanical properties of milk fouling and whey protein fouling
GAMM Mitteilungen, 1, (2019) [Link]
L. Klemm, R. Seydewitz, E. Morales-Orcajo, M. Böl
On the electro-chemo-mechanical modelling of stomach smooth muscle contraction
GAMM Mitteilungen, 1, (2019) [Link]
L. Kacergis, R. Mitkus, M. Sinapius
Influence of fused deposition modeling process parameters on the transformation of 4D printed morphing structures
Smart Materials and Structures, 28, 105042, (2019) [Link]
E. Kappel, R. Prussak, J. Wiedemann
On a simultaneous use of fiber-Bragg-gratings and strain-gages to determine the stress-free temperature Tsf during GLARE manufacturing
Composite Structures, Volume 227, 1, 111279, (2019) [Link]
Lüders, C.; Sinapius, M.
Fatigue of fibre-reinforced plastics due to cryogenic thermal cycling
Journal of Composite Materials, 1-13, (2019) [Link]
Lüders, C., Sinapius, M., Krause, D.
Adaptive cycle jump and limits of degradation in micromechanical fatigue simulations of fibre-reinforced plastics
International Journal of Damage Mechanics, Volume 28, 1523-1555, (2019) [Link]
Meyer, P., Boblenz, J., Sennewald, C. , Vorhof, M. , Hühne, C. , Cherif, C. and Sinapius, M.
Development and Testing of Woven FRP Flexure Hinges for Pressure-Actuated Cellular Structures with Regard to Morphing Wing Applications
MDPI Aerospace, 6, 116 (2019) [Link]
Prussak, R., Stefaniak, D., Kappel, E., Hühne, C. and Sinapius, M.
Smart cure cycles for fiber metal laminates using embedded fiber Bragg grating sensors
Composite Structures 213, 252–260 (2019) [Link]
Exner, W., Hein, R., Mahrholz, T., Wierach, P., Monner, H.P., Sinapius, M.
Impact of nanoparticles on the process-induced distortions of carbon fiber reinforced plastics: An experimental and simulative approach
Journal of Applied Polymer Science, Vol. 136, 5, 47031, (2019) [Link]
Sadri, H., Schlums, H., Sinapius, M.
Investigation of Structural Conformity in a Three-Pad Adaptive Air Foil Bearing With Regard to Active Control of Radial Clearance
Journal of Tribology 141, 081701, (2019) [Link]
J. Dittmann, A. Dietzel, M. Böl
Mechanical characterisation of oocytes - the influence of sample geometry on parameter identification
Journal of the Mechanical Behavior of Biomedical Materials, 77, 764-775, (2018) [Link]
M. Garcés-Schröder, D. Metz, L. Hecht, M. Leester-Schädel, R. Iyer, M. Böl, A. Dietzel
Characterization of skeletal muscle passive mechanical properties by novel micro-force sensor and tissue micro-dissection by femtosecond laser ablation
Microelectronic Engineering, 192, 70-76, (2018) [Link]
F. Sewerin, S. Rigopoulos
An LES-PBE-PDF approach for predicting the soot particle size distribution in turbulent flames
Combustion and Flame, 189, 62-76, (2018) [Link]
E. Morales Orcajo, T. Siebert, M. Böl
Location-dependent correlation between tissue structure and the mechanical behaviour of the urinary bladder
Acta Biomaterialia, 75, 263-278, (2018) [Link]
N. Beißner, A. Bolea Albero, J. Füller, T. Kellner, L. Lauterboeck, J. Liang, M. Böl, B. Glasmacher, C. Müller-Goymann, S. Reichl
Improved in vitro models for preclinical drug and formulation screening focusing on 2D and 3D skin and cornea constructs
European Journal of Pharmaceutics and Biopharmaceutics, 126, 57-66, (2018) [Link]
C. Wick, M. Böl, Florian Müller, R. Blickhan, T. Siebert
Packing of muscles in the rabbit shank influences three-dimensional architecture of M. soleus
Journal of the Mechanical Behavior of Biomedical Materials, 83, 20-27, (2018) [Link]
R. Seydewitz, T. Siebert, M. Böl
A phenomenological approach for modelling force enhancement and depression in skeletal muscle tissue
Proceedings in Applied Mathematics and Mechanics, 18, (2018) [Link]
Al-Lami, A., Hilmer, P., Sinapius, M.
Eco-Efficiency assessment of manufacturing carbon fiber reinforced polymers (CFRP) in aerospace industry
Aerospace Science and Technology, 79 pp., 669-678, (2018) [Link]
Estevam Schmiedt, R., Qian, C., Behr, C., Hecht, L. , Dietzel, A., Sinapius, M.
Flexible sensors on polymide fabricated by femtosecond laser for integration in fiber reinforced polymers
Flex. Print. Electron., 3 025003, (2018) [Link]
Exner, W., Hein, R., Mahrholz, T., Wierach, P., Monner, H.P., Sinapius, M.
Impact of nanoparticles on the process-induced distortions of carbon fiber reinforced plastics: An experimental and simulative approach
Journal of Applied Polymer Science, Vol. 136, (5), No. 47031, (2018) [Link]
Geier, S., Mahrholz, T., Wierach, P. und Sinapius, M.
Morphology- and Ion Size-Induced Actuation of Carbon Nanotube Architectures. Int'l J. of Smart and Nano Materials
Vol 9, No 2, pp. 111-134, (2018) [Link]
Jux. M., Fankhänel. J., Daum, B., Mahrholz, T., Sinapius, M., Rolfes, R.
Mechanical properties of epoxy/boehmite nanocomposites in dependency of mass fraction and surface modification - An experimental and numerical approach
Polymer 141 pp. 34-45, (2018) [Link]
Khattab, I.Al. and M. Sinapius, M.
Multiscale modelling and simulation of polymer nanocomposites using transformation field analysis (TFA)
Composite Structures 209 (2019) 981–991, (2018) [Link]
Lorsch, P., Sinapius, M. and Wierach, P.
Methodology for high-frequency testing of fiber-reinforced plastics, in: Christ, H.J. (Ed.): Fatigue of Materials at Very High Numbers of Loading Cycles
Springer Spectrum, (2018) [Link]
Lüders, C.; Krause, D.; Kreikemeier, J.
Fatigue damage model for fibre-reinforced polymers at different temperatures considering stress ratio effects
Journal of Composite Materials, (2018) [Link]
Pommer, C., Sinapius, M.
A Novel Approach to Monitoring the Curing of Epoxyin Closed Tools by Use of Ultrasonic Spectroscopy
Sensors 2018, Vol. 18 (1), (2018) [Link]
Pommer, C., Sinapius, M.
Sensor Design Optimization for Ultrasonic Spectroscopy Cure Monitoring
Sensors 2018, 18, 1819, (2018) [Link]
Prussak, R., Stefaniak, D., Hühne, C., Sinapius, M.
Evaluation of residual stress development in FRP-metal hybrids using fiber Bragg grating sensors
Production Engineering, (2018) [Link]
Scholle, P. and Sinapius, M.
Pulse Ultrasonic Cure Monitoring of the Pultrusion Process
Sensors 2018, Special Issue "Advances in FRP Composites: Applications, Sensing, and Monitoring", Vol. 18(10), (2018) [Link]
Sharma, S.K., Sivarathri, A.K., Chauhan, V. S. and Sinapius, M.
Effect of Low Temperature on Electromagnetic Radiation from Soft PZT SP-5A Under Impact Loading
Journal of Electronic Materials, (2018) [Link]
Sinapius, M.
Adaptronik Prinzipe - Funktionswerkstoffe - Funktionselemente - Zielfelder mit Forschungsbeispielen
Springer Verlag, (2018) [Link]
Rakhshbahar, M. und Sinapius, M.
A Novel Approach: Combination of Automated Fiber Placement (AFP) and Additive Layer Manufacturing (ALM)
J. Compos. Sci., 2, 42, (2018) [Link]
Sadri, H.; Schlums, H.; Sinapius, M.
Design Characteristics of an Aerodynamic Foil Bearing with Adaptable Bore Clearance
Proceedings of ASME 2018 Turbo Expo 2018, (2018)
R.Trostorf, K. Leichsenring, R. Seydewitz, M. Böl
On the phenomenological model for potato tuber tissue in relation to its anatomy
Proceedings in Applied Mathematics and Mechanics, 18, 1-2, (2018)
M. Böl, K. Leichsenring, T. Siebert
Effects of growth on muscle, tendon and aponeurosis tissues in rabbit shank musculature
The Anatomical Record, 300, 1123-1136, (2017) [Link]
R. Menzel, M. Böl, T. Siebert
Importance of contraction history on muscle force of porcine urinary bladder smooth muscle tissue
International Urology and Nephrology, 49, 205-214, (2017) [Link]
R. Seydewitz, R. Menzel, T. Siebert, M. Böl
Three-dimensional mechano-electrochemical model for smooth muscle contraction of the urinary bladder
Journal of the Mechanical Behavior of Biomedical Materials, 75, 128-146, (2017) [Link]
F. Sewerin, S. Rigopoulos
An explicit adaptive grid approach for the numerical solution of the population balance equation
Chemical Engineering Science, 168, 250-270, (2017) [Link]
C. E. Garcia-Gonzalez, F. Sewerin, A. Liu, S. Rigopoulos, B. A. O. Williams
Predicting and measuring soot formation and particle size distributions in a laminar diffusion flame
Proceedings of the European Combustion Meeting, Dubrovnik, Croatia, (2017)
T. Siebert, A. Tomalka, N. Stutzig, K. Leichsenring, M. Böl
Changes in three-dimensional muscle structure of rabbit gastrocnemius, flexor digitorum longus, and tibialis anterior during growth
Journal of the Mechanical Behavior of Biomedical Materials, 74, 507-519, (2017) [Link]
R. Seydewitz, E. Morales-Orcajo, M. Böl
Modelling the contraction properties of smooth muscle cells in bladder tissue
Proceedings in Applied Mathematics and Mechanics, 17, 223-224, (2017) [Link]
A. Tomalka, M. Borsdorf, M. Böl, T. Siebert
Porcine stomach smooth muscle force depends on history-effects
Frontiers in Physiology – Gastrointestinal Sciences, 8, 802, (2017) [Link]
M. Garcés-Schröder, L. Hecht, A. Vierheller, M. Leester-Schädel, M. Böl, A. Dietzel
Micro-grippers with femtosecond-laser machined in-plane agonist-antagonist SMA actuators integrated on wafer-level by galvanic riveting
Proceedings, 1 (4), 1-5, (2017) [Link]
F. Sewerin, S. Rigopoulos
An LES-PBE-PDF approach for modeling particle formation in turbulent reacting flows
Physics of Fluids, 29(10), 105105, (2017) [Link]
M. Schulz, M. Böl
An objective and locking-free finite-element formulation for geometrically exact Kirchhoff rods
Proceedings in Applied Mathematics and Mechanics, 17, 347-348, (2017) [Link]
Jux, M. und Finke, B. Schilde, C. und Mahrholz, Th. Sinapius, M., Kwade, A.
Effects of Al(OH)O nanoparticle agglomerate size in epoxy resin on tension, bending and fracture properties
Journal of Nanoparticle Research, 19 (4), Seite 139 ff, (2017) [Link]
Hesse, C.; Vivar Perez,J.M.; Sinapius, M.
Frequency-independent radiation modes of interior sound radiation: An analytical study
Journal of Sound and Vibration, Vol. 392, S. 31-40, (2017) [Link]
Geier, S.; Mahrholz, Thorsten; Wierach, Peter; Sinapius, M.
Experimental Investigations of Actuators Based on Carbon Nanotube Architectures
In A. L. Araujo, C. A. Mota Soares (Hrsg.)
Smart Structures and Materials, S. 67 - 95, Springer, (2017) [Link]
M. Endres, M., Sommerwerk, H., Mendig, C., Sinapius, M., Horst, P.
Experimental study of two electro-mechanical de-icing systems applied on a wing section tested in an icing wind tunnel
CEAS Aeronaut J (2017) 8:429–439, (2017) [Link]
Raddatz, F., Szewieczek, A., Sinapius, M.
Experimental Methods. In: R. Lammering, U. Gabbert, M. Sinapius, T. Schuster, P. Wierach (Eds.): Lamb-Wave Based Structural Health Monitoring in Polymer Composites
S. 91-111, Springer, Cham 2017, (2017) [Link]
Heintze, C., Duczek, S., Sinapius, M.
A Minimal Model for Fast Approxiamtion of Lamb Wave Propagation in Complex Aircraft Parts. In: R. Lammering, U. Gabbert, M. Sinapius, T. Schuster, P. Wierach (Eds.): Lamb-Wave Based Structural Health Monitoring in Polymer Composites
S. 241-259, Springer, Cham 2017, (2017) [Link]
Raddatz, F., Sinapius, M.
Time-of-Flight Calculation in Compllex Structures. In: R. Lammering, U. Gabbert, M. Sinapius, T. Schuster, P. Wierach (Eds.): Lamb-Wave Based Structural Health Monitoring in Polymer Composites
S. 331-356, Springer, Cham 2017, (2017) [Link]
Schmidt, D., Sinapius, M.
Mode Selective Actuator-Sensor-Systems. In: R. Lammering, U. Gabbert, M. Sinapius, T. Schuster, P. Wierach (Eds.): Lamb-Wave Based Structural Health Monitoring in Polymer Composites
S. 401-429, Springer, Cham 2017, (2017) [Link]
Szewieczek, A., Sinapius, M.
Virtual Sensors for SHM. In: R. Lammering, U. Gabbert, M. Sinapius, T. Schuster, P. Wierach (Eds.): Lamb-Wave Based Structural Health Monitoring in Polymer Composites
S. 431-441, Springer, Cham 2017, (2017) [Link]
Heinze, C., Duczek, S., Sinapius, M., Wierach, P.
A minimal model–based approach for the fast approximation of wave propagation in complex structures
Structural Health Monitoring, Vol. 16(5), S. 568–582, (2017) [Link]
L. Reinhardt, T. Siebert, K. Leichsenring, R. Blickhan, M. Böl
Intermuscular pressure between synergistic muscles correlates with muscle force
Journal of Experimental Biology, 219, 2311-2319, (2016) [Link]
M. Schulz, M. Böl
Modeling the quasi-static mechanical behavior of the extensible worm-like chain in the finite-element framework
Proceedings in Applied Mathematics and Mechanics, 16, 393-394, (2016) [Link]
J. Dittmann, D. Töpfer, M. Böl
Experimental-based material parameter identification of oocytes
Proceedings in Applied Mathematics and Mechanics, 16, 79-80, (2016) [Link]
C. Weichert, K. Leichsenring, M. Ernst, C. Wick, T. Siebert, R. Blickhan, M. Böl
Three-dimensional reconstruction of M. gastrocnemius contraction
Proceedings in Applied Mathematics and Mechanics, 16, 111-112, (2016) [Link]
J. Liang, A. Bolea Albero, J. Füller, C. Müller-Goymann, M. Böl
Computational and experimental analysis of wound healing processes
Proceedings in Applied Mathematics and Mechanics, 16, 95-96, (2016) [Link]
A. Bolea Albero, M. Böl
On the modelling of finite growth considering the mechanics of cell division
Proceedings in Applied Mathematics and Mechanics, 16, 925-928, (2016) [Link]
M. Böl, K. Leichsenring, M. Ernst, A. E. Ehret
Long-term mechanical behaviour of skeletal muscle tissue in semi-confined compression experiments
Journal of the Mechanical Behavior of Biomedical Materials, 63, 115-124, (2016) [Link]
K. Dröder, M. Brand, T. Gebken, M. Kühn, M. Böl
Increasing the interlocking effect between metal and FRP by mechanical undercuts
International Journal of Automotive Composites, 2, 316-329, (2016) [Link]
R. Seydewitz, M. Böl
On an electrical-chemical-mechanical approach for modelling smooth muscle excitation in bladder tissue
Proceedings in Applied Mathematics and Mechanics, 16, 393-394, (2016) [Link]
Kunze, J.; Mahrholz,T.; Sinapius, M.
Identification and quantitation of processing parameters controlling the surface quality of carbon fibre-reinforced composites
Journal of Reinforced Plastics and Composites; (2016) [Link]
Exner, Wibke; Kühn, Alexandra; Szewieczek, Artur; Opitz, Mark; Mahrholz, Thorsten; Sinapius, Michael; Wierach, Peter
Determination of volumetric shrinkage of thermally cured thermosets using video-imaging
Polymer Testing (49) pp.100-106, (2016) [Link]
Löbel, T., Holzhüter, D., Sinapius, M., Hühne, C.
A Hybrid Bondline Concept for Bonded Composite Joints
Int. Journal of Adhesion and Adhesives, (2016) [Link]
Haase, T.; Unruh, O.
Active Control of Counter-Rotating Open Rotor Interior Noise in a Dornier 728 Experimental Aircraft: Optimised Sensor Placement
Acts Acoustica United with Acustica, Vol. 102 (2016) 361 – 372, (2016) [Link]
Henneberg, A., Transier, G., Sinapius, M.
Consolidated Fibre Placement (CFP) - adhesive joining of consolidated fibre tapes
Composite Structures, (2016) [Link]
Alekseenko, S. V., Mendig, C., Schulz, M., Sinapius M., Prikhodko, A. A.
An Experimental Study of Freezing of a Supercooled Water Droplet on a Solid Surface
Technical Physics Letters, Vol. 42, No. 5, pp. 524–527, (2016) [Link]
Köke, H.; Weiss, L; Hühne, C.; Sinapius, M.
A graph-based method for calculating draping strategies for the application of fiber-reinforced materials on arbitrary surfaces
Composite Structures, (2016) [Link]
A. Bolea Albero, M. Böl
Mechanics of cell-division: A new continuum model for growth inhomogeneities
Proceedings in Applied Mathematics and Mechanics, 15, 85-86, (2015) [Link]
M. Garcés-Schröder, M. Leester-Schädel, M. Schulz, M. Böl, A. Dietzel
Micro-Gripper: A new concept for a monolithic single-cell manipulation device
Sensors and Actuators A: Physical, 236, 130-139, (2015) [Link]
T. Siebert, K. Leichsenring, C. Rode, C. Wick, N. Stutzig, H. Schubert, R. Blickhan, M. Böl
Three-Dimensional Muscle Architecture and Comprehensive Dynamic Properties of Rabbit Gastrocnemius, Plantaris and Soleus: Input for Simulation Studies
PloS ONE, 10, e0130985 (online), (2015) [Link]
M. Böl, A. E. Ehret, K. Leichsenring, M. Ernst
Tissue-scale anisotropy and compressibility of tendon in semi-confined compression tests
Journal of Biomechanics, 48, 1092-1098, (2015) [Link]
M. Böl, K. Leichsenring, M. Ernst, C. Wick, R. Blickhan, T. Siebert
Novel microstructural findings in m. plantaris and their impact during active and passive loading at macro level
Journal of the Mechanical Behavior of Biomedical Materials, 51, 25-39, (2015) [Link]
F. Sewerin, S. Rigopoulos
A methodology for the integration of stiff chemical kinetics on GPUs
Combustion and Flame, 162(4), 1375–1394, (2015) [Link]
Unruh, Oliver; Blech, Christopher; Monner, Hans Peter
Numerical and Experimental Study of Sound Power Reduction Performance of Acoustic Black Holes in Rectangular Plates
SAE International Journal of Passenger Cars - Mechanical Systems, 8 (3). ISSN 1946-3995, (2015) [Link]
Unruh, Oliver
Parametric Study of Sound Radiation Properties of Complex Vibration Patterns in Rectangular Plates using an Analytical Model
Acta acustica united with Acustica, 101 (4). S. Hirzel Verlag. ISSN 1610-1928, (2015) [Link]
Unruh, O.; Sinapius, M.; Monner, H. P.
Sound Radiation Properties of Complex Modes in Rectangular Plates: A Numerical Study
Acta acustica united with Acustica, Hirzel Verlag, Volume 101, Number 1, January/February 2015, S. 62-72 (11), (2015) [Link]
Szewieczek, Artur; Willberg, Christian; Sinapius, Michael
Virtual Sensors for SHM using Isogeometric Piezoelectric Finite Elements
International Journal of Structural Integrity, 6 (6), Seiten 704-713, (2015) [Link]
Prussak, Robert; Stefaniak, Daniel; Hühne, Christian; Sinapius, Michael
Residual Stresses in Intrinsic UD-CFRP-Steel-Laminates - Experimental Determination, Identification of Sources, Effects and Modification Approaches
Materials Science Forum (825), Seiten 369-376. Trans Tech Publications. ISBN 978-3-03835-515-1. ISSN 0255-5476 (2015) [Link]
Heinze, Christoph; Sinapius, Michael; Wierach, Peter
Lamb Wave Propagation in Complex Geometries - A Minimal Model Approach
Proceedings of the 5th International Workshop on Aircraft System Technologies (AST 2015), Seiten 383-390. Shaker Verlag. (2015) [Link
F. Sewerin, S. Rigopoulos
Integration of stiff chemical kinetics on a CPU-GPU pair - Application to a turbulent, non-premixed flame
Mediterranean Combustion Symposium, Rhodes, Greece, (2015)
Viandier, Aurélie; Stefaniak, Daniel; Schröder, Daniel; Krewer, Ulrike; Hühne, Christian; Sinapius, Michael
Degradation Analysis of Fibre-Metal Laminates under Service Conditions to Predict their Durability
U.P.B. Sci. Bull., Series D, Vol. 1, Iss. 1, 2016, (2015)
A. Bolea Albero, M. Böl
Growing between barriers
Proceedings in Applied Mathematics and Mechanics, 14, 99-100, (2014) [Link]
R. Seydewitz, A. Bolea Albero, M. Böl
A continuum mechanics approach for modelling arbitrary degradation and erosion processes in polymers
Proceedings in Applied Mathematics and Mechanics, 14, 395-396, (2014) [Link]
J. Hellriegel, S. Günther, I. Kampen, A. Bolea Albero, A. Kwade, M. Böl, R. Krull
A biomimetic gellan-based hydrogel as a physicochemical biofilm model
Journal of Biomaterials and Nanobiotechnology, 5, 83-97, (2014) [Link]
A. Bolea Albero, A. E. Ehret, M. Böl
A new approach to the simulation of microbial biofilms by a theory of fluid-like pressure-restricted finite growth
Computer Methods in Applied Mechanics and Engineering, 272, 271-289, (2014) [Link]
M. Böl, A. Bolea Albero
On a new model for inhomogeneous volume growth of elastic bodies
Journal of the Mechanical Behavior of Biomedical Materials, 29, 582-593, (2014) [Link]
M. Böl, A. E. Ehret, K. Leichsenring, C. Weichert, R. Kruse
On the anisotropy of skeletal muscle tissue under compression
Acta Biomaterialia, 10, 3225-3234, (2014) [Link]
M. Misol, T. Haase, H. P. Monner, M. Sinapius
Causal feedforward control of a stochastically excited fuselage structure with active sidewall panel
J. Acoust. Soc. Am., vol. 136 (4), S. 1610-1618, (2014) [Link]
T. Beutel, S. Sattler, Y. El Sayed, M. Schwerter, M. Zander, S. Büttgenbach, M. Leester-Schädel, R. Radespiel, M. Sinapius, P. Wierach
Design of a high-lift experiment in water including active flow control
Smart Materials and Structures, vol. 23 (7), S. 1-10, (2014) [Link]
F. R. S. da Cunha, T. Tobias, R. Degenhardt, M. Sinapius, F. C. de Araújo, R. Zimmermann
A Robustness-Based Design Strategy for Composite Structures
Aircraft Engineering and Aerospace Technology, vol. 86 (4), S. 274-286, (2014) [Link]
F. R. S. da Cunha, T. Wille, R. Degenhardt, M. Sinapius, F. de Araújo, C. Francisco, R. Zimmermann
A robustness-based design strategy for composite structures – probabilistic approach
Aircraft Engineering and Aerospace Technology, vol. 86 (4), S. 262-273, (2014) [Link]
M. Misol, C. Bloch, H. P. Monner, M. Sinapius
Performance of active feedforward control systems in non-ideal, synthesized diffuse sound fields
J. Acoust. Soc. Am., vol. 135 (4), S. 1887–1897, (2014) [Link]
M. Sinapius, H. P. Monner, M. Kintscher, J. Riemenschneider
DLR's Morphing Wing Activities within the European Network
Procedia IUTAM, Volume 10, S. 416-426, (2014) [Link]
Marco Straubel, Martin Zander, Christian Hühne
Design and Sizing of the GOSSAMER Boom Deployment Concept
In Advances in Solar Sailing, Springer Praxis Books, chapter Part III Technology Activities,
pages 593 – 608. Springer-Verlag, 2014, (2014) [Link]
K. Leichsenring, M. Plöthner, M. Böl, R. Blickhan, T. Siebert
Mechanische Eigenschaften der Sehne und Aponeurose des M. Soleus beim Kaninchen
Beiträge zur Bewegungswissenschaft, Band 3, 1-14, (2013) [Link]
R. Seydewitz, M. Böl
Biodegradable polymers - a new modelling approach
Constitutive Models for Rubber VIII, Eds.: N. Gil-Negrete, A. Alomso, Taylor & Francis Group London, 157-162, (2013) [Link]
M. Böl, A. Schmitz
A coupled chemomechanical model for smooth muscle contraction
Computer Models in Biomechanics. From Nano to Macro, Gerhard A. Holzapfel and Ellen Kuhl (Eds.): Springer Netherlands, 63–75, (2013) [Link]
R. Seydewitz, M. Böl
A coupled chemo mechanical model for polymer degradation and erosion processes
Proceedings in Applied Mathematics and Mechanics, 13, 189–190, (2013) [Link]
A. Bolea Albero, M. Böl
On the mechanics of fluid-like growth in solid materials
Proceedings in Applied Mathematics and Mechanics, 13, 59–60, (2013) [Link]
A. E. Ehret, M. Böl
Modelling mechanical characteristics of microbial biofilms by network theory
Journal of the Royal Society Interface, 10, 20120676, (2013) [Link]
P. Schenk, T. Siebert, H. Hiepe, D. Güllmar, J. R. Reichenbach, C. Wick, R. Blickhan, M. Böl
Determination of three-dimensional muscle architectures: Validation of the DTI based fiber tractography method by manual digitization
Journal of Anatomy, 223, 61-68, (2013) [Link]
M. Böl, A. E. Ehret, A. Bolea Albero, J. Hellriegel, R. Krull
Recent advances in mechanical characterisation of biofilm and their significance for material modelling
Critical Reviews in Biotechnology, 33, 145-171, (2013) [Link]
M. Böl, R. Kruse, A. E. Ehret
On a staggered iFEM approach to account for friction in compression testing of soft materials
Journal of the Mechanical Behavior of Biomedical Materials, 27, 204-213, (2013) [Link]
M. Böl, K. Leichsenring, C. Weichert, M. Sturmat, P. Schenk, R. Blickhan, T. Siebert
Three-dimensional surface geometries of the rabbit soleus muscle during contraction - input for biomechanical modelling and its validation
Biomechanics and Modeling in Mechanobiology, 12, 1205-1220, (2013) [Link]
P. Lorsch, S. Algermissen, M. Sinapius
Concepts and Simulated Testing of Active Railway-Wheels
International Journal of Railway Technology, 2 (2), S. 65-78, (2013) [Link]
S. Geier, T. Mahrholz, P. Wierach, M. Sinapius
Carbon nanotube array actuators
Smart Materials and Structures, 22, 094003, (DOI) 10.1088/0964-1726/22/9/094003, (2013) [Link]
E. Kappel, D. Stefaniak, D. Holzhüter, C. Hühne, M. Sinapius
Manufacturing distortions of a CFRP box-structure - A semi-numerical prediction Approach Composites
Part A, (2013) [Link]
M. Kubicka, T. Mahrholz, A. Kühn, P. Wierach, M. Sinapius
Magnetostrictive properties of epoxy resins modified with Terfenol-D particles for detection of internal stress in CFRP
Part 2: evaluation of stress detection, J. Material Science, 48:6578–6584, (2013) [Link]
D. Schmidt, M. Sinapius, P. Wierach
Design of mode selective actuators for Lamb wave excitation in composite plates
CEAS Aeronautical Journal, (2013) [Link]
A. Szewieczek, W. Hillger, M. Sinapius
Virtual sensors for the optimization of a SHM sensor network based on Lamb wave propagation
CEAS Aeronautical Journal, (2013) [Link]
S. Geier, T. Mahrholz, P. Wierach, M. Sinapius
Carbon nanotube-based actuators
In: C. Boller und H. Janocha, New Trends in Smart Technologies,Fraunhofer, S. 39-49. (2013)
R. Kruse, C. Weichert, M. Böl
Elastic properties of muscle tissue: Comparison of an inverse finite element approach and homogeneous deformation
Proceedings in Applied Mathematics and Mechanics, 12, 101-102, (2012) [Link]
M. Sturmat, C. Weichert, T. Siebert, M. Böl
A numerical validation approach of a finite element muscle model using optical data
Proceedings in Applied Mathematics and Mechanics, 12, 127-128, (2012) [Link]
N. Hempel, M. Böl
Multi-phase modeling of shape memory polymers
Proceedings in Applied Mathematics and Mechanics, 12, 331-332, (2012) [Link]
A. Bolea Albero, A. E. Ehret, M. Böl
A continuum model for free growth in living materials
Proceedings in Applied Mathematics and Mechanics, 12, 123-124, (2012) [Link]
A. E. Ehret, A. Bolea Albero, M. Böl
A network model for the EPS matrix of microbial biofilms
Proceedings in Applied Mathematics and Mechanics, 12, 125-126, (2012) [Link]
T. A. Cheema, A. Lichtner, C. Weichert, M. Böl, G. Garnweitner
Fabrication of transparent polymer-matrix nanocomposites with enhanced mechanical properties from chemically modified ZrO2 nanoparticles
Journal of Materials Science, 47, 2665-2674, (2012) [Link]
A. M. Zöllner, O. J. Abilez, M. Böl, E. Kuhl
Stretching skeletal muscle - Eccentric muscle growth through sarcomerogenesis
PloS ONE, 7, e45661 (online), (2012) [Link]
C. Kober, B.-I. Berg, M. Sturmat, J. Rieger, L. Gallo, M. Böl, M. Mack, H.-F. Zeilhofer, R. Sader
Macroscopic muscular modeling based on in vivo 4D-radiology
International Journal for Multiscale Computational Engineering, 10, 131-142, (2012) [Link]
M. Böl, O.J. Abilez, A. N. Assar, C. K. Zarins, E. Kuhl
In vitro/in silico charaterization of active and passive stresses in cardiac muscle
International Journal for Multiscale Computational Engineering, 10, 171-188, (2012) [Link]
M. Böl, A. Schmitz, G. Nowak, T. Siebert
A three-dimensional chemo-mechanical continuum model for smooth muscle contraction
Journal of the Mechanical Behavior of Biomedical Materials, 13, 215-229, (2012) [Link]
M. Böl, R. Kruse, A. E. Ehret, K. Leichsenring, T. Siebert
Compressive properties of passive skeletal muscle - The impact of precise sample geometry on parameter identification in inverse finite element analysis
Journal of Biomechanics, 45, 2673-2679, (2012) [Link]
T. J. Adam, P. Horst, P. Lorsch, M. Sinapius
Experimental investigation of VHCF of polymer composites: Two alternative approaches
Materialpüfung/Materials Testing, 54 (11-12), pp. 734-741, (2012) [Link]
W. Exner, C. Arlt, T. Mahrholz, U. Riedel, M. Sinapius
Nanoparticles with Various Surface Modifications as Functionalized Cross-Linking Agents for Composite Resin Materials
Composites Science and Technology, (2012) [Link]
D. Holzhüter, A. Pototzky, C. Hühne, M. Sinapius
Automated Scarfing Process for Bonded Composite Repairs
Adaptive, Tolerant and Efficient Composite Structures Research Topics in Aerospace, Springer, S. 297-307, ISBN 978-3-642-29189-0, (2012) [Link]
M. Kubicka, T. Mahrholz, A. Kühn, P. Wierach, M. Sinapius
Magnetostrictive properties of epoxy resins modified with Terfenol-D particles for detection of internal stress in CFRP
Part 1: Materials and processes, Journal of Materials Science, 47, S. 5752-5759, Springer, (2012) [Link]
T. Mahrholz, M. Sinapius
Fundamental characterization of epoxy-silica nanocomposites used for the manufacturing of fiber reinforced composites,
Adaptive, Tolerant and Efficient Composite Structures Research Topics in Aerospace, 1., Springer, S. 69-83, ISBN 3642291899, (2012) [Link]
S. Opitz, S. Geier, J. Riemenschneider, H. P. Monner, M. Sinapius
Carbon Nanotube Actuation
Adaptive, Tolerant and Efficient Composite Structures Research Topics in Aerospace, Springer, S. 85-104, ISBN 978-3-642-29189-0, (2012) [Link]
M. Straubel, M. Sinapius
Boom Concept for Gossamer Deployable Space Structures
Adaptive, Tolerant and Efficient Composite Structures, Springer, S. 237-250, ISBN 978-3-642-29189-0, (2012) [Link]
M. Wiedemann, M. Sinapius
Adaptive, Tolerant and Efficient Composite Structures
Research Topics in Aerospace, Springer, ISBN 978-3-642-29189-0, (2012) [Link]
K. Leichsenring, T. Siebert, M. Böl, R. Blickhan
Einfluss von Elastizitäten auf die Bestimmung der aktiven Muskeleigenschaften des M. Soleus beim Kaninchen
Schriften der DVS, Biomechanik - vom Muskelmodell bis zur angewandten Bewegungswissenschaft, Czwalina Verlag, 219, 87-93, (2011) [Link]
M. Sturmat, C. Weichert, M. Böl
Dreidimensionale Skelettmuskelmodellierung auf Basis der Finite-Elemente-Methode
Schriften der DVS, Biomechanik - vom Muskelmodell bis zur angewandten Bewegungswissenschaft, Czwalina Verlag, 219, 123-129, (2011) [Link]
C. Weichert, K. Leichsenring, T. Siebert, R. Blickhan, M. Böl
Passive Muskeleigenschaften – Experiment und Simulation
Schriften der DVS, Biomechanik - vom Muskelmodell bis zur angewandten Bewegungswissenschaft, Czwalina Verlag, 219, 80-86, (2011) [Link]
M. Sturmat, M. Böl
Electromechanical modelling of skeletal muscle contractions
Proceedings in Applied Mathematics and Mechanics, 11, 127-128, (2011) [Link]
C. Weichert, K. Leichsenring, T. Siebert, M. Böl
Passive muscle behaviour - experimental and numerical investigations
Proceedings in Applied Mathematics and Mechanics, 11, 135-136, (2011)
A. Bolea Albero, M. Böl
A finite element model for biofilm volume growth
Proceedings in Applied Mathematics and Mechanics, 11, 351-352, (2011) [Link]
C. Küpper, D. Güllmar, P. Hiepe, T. Siebert, K. Leichsenring, R. Blickhan, M. Böl
3D-Rekonstruktion der Muskelarchitektur bei Oryctolagus Cuniculus - DTI versus Microscripe
Beiträge zur Bewegungswissenschaft, 2, 29-38, (2011) [Link]
A. E. Ehret, M. Böl, M. Itskov
A continuum constitutive model for the active behaviour of skeletal muscle
Journal of the Mechanics and Physics of Solids, 59, 625-636, (2011) [Link]
M. Böl, M. Sturmat, C. Weichert, C. Kober
A new approach for the validation of skeletal muscle modelling using MRI data
Computational Mechanics, 47, 591-601, (2011) [Link]
M. Böl, H. Stark, N. Schilling
On a phenomenological model for fatigue effects in skeletal muscles
Journal of Theoretical Biology, 281, 122-132, (2011) [Link]
A. Schmitz, M. Böl
On a phenomenological model for active smooth muscle contraction
Journal of Biomechanics, 44, 2090-2095, (2011) [Link]
M. Böl, R. Weikert, C. Weichert
A coupled electromechanical model for the excitation-dependent contraction of skeletal muscle
Journal of the Mechanical Behavior of Biomedical Materials, 4, 1299-1310, (2011) [Link]
F. Fisch, F. Sewerin, F. Holzapfel
Approach Trajectory Optimization including a Tunnel Track Constraint
AIAA Atmospheric Flight Mechanics Conference, Portland, Oregon, (2011) [Link]
S. Algermissen, R. Keimer, M. Rose, M. Straubel, M. Sinapius, H. P. Monner
Smart-Structures Technology for Parallel Robots
Journal of Intelligent and Robotic Systems, Vol. 63, S. 547-574, Springer, (2011) [Link]
W. Hillger, A. Szewieczek, D. Schmidt, M. Sinapius
Lamb Wave Techniques for Damage Detection in CFRP-Components - is this really possible?
DEStech Publications, Inc., ISBN 978-1-60595-053-2, (2011) [Link]
D. Könnicke, A. Kühn, T. Mahrholz, M. Sinapius
Polymer nanocomposites based on epoxy resin and ATH as a new flame retardant for CFRP: preparation and thermal characterisation
Journal of Materials Science, Springer Science+Business Media, LLC 2011, 46: 7046–7055 (2011) [Link]
M. Perner, M. Müller, M. Sinapius, H. Beikirch
An Approach for Autonomous Damage Detection by Means of Modal Fingerprints
Journal of Intelligent Material Systems and Structures, 22 (1), S. 93-100, ISBN 1045-389X, (2011) [Link]
S. Walter, W. Steinmann, J. Schütte, G. Seide, T. Gries, G. Roth, P. Wierach, M. Sinapius
Characterisation of piezoelectric PVDF monofilaments
Materials Technology: Advanced Performance Materials, Volume 26, Number 3, pp. 140-145(6), (2011) [Link]
J. Wenzel, M. Sinapius, U. Gabbert
Primary structure mass estimation in early phases of aircraft development using the finite element method
CEAS Aeronautical Journal, (2011) [Link]
R. Seydewitz, M. Böl
A new modelling approach for the description of tissues at cell level
Proceedings in Applied Mathematics and Mechanics, 10, 91-92, (2010) [Link]
M. Sturmat, C. Kober, M. Böl
Experimental and numerical investigations in skeletal muscle modelling
Proceedings in Applied Mathematics and Mechanics, 10, 97-98, (2010) [Link]
A. Bolea Albero, C. Bertsch, M. Böl
3D finite element analysis of biofilm growth considering nutrient diffusion
Proceedings in Applied Mathematics and Mechanics, 10, 283-284, (2010) [Link]
S. Reese, M. Böl, D. Christ
Finite element-based multi-phase modelling of shape memory polymer stents
Computer Methods in Applied Mechanics and Engineering, 199, 1276-1286, (2010) [Link]
M. Böl
Micromechanical modelling of skeletal muscles: From the single fibre to the whole muscle
Archive of Applied Mechanics, 80, 557-567, (2010) [Link]
S. Algermissen, M. Sinapius
Robust Gain Scheduling for Smart-Structures in Parallel Robots
Springer Tracts in Advanced Robotics (STAR), Robotic Systems for Handling and Assembly, 67, Springer, S. 159-174, (2010) [Link]
T. Beutel, M. Leester-Schädel, P. Wierach, M. Sinapius, S. Büttgenbach
Novel Pressure Sensor for Aerospace Purposes
Sensors & Transducers Journal, Vol. 115, Issue 4, April 2010, pp. 11-19, (2010) [Link]
R. Keimer, M. Sinapius
Design and Implementation of Adaptronik Robot Components
Springer Tracts in Advanced Robotics (STAR) Robotic Systems for Handling and Assembly, 67, Springer, S. 413-427, (2010) [Link]
M. Böl, F. E. Gunawan, G. A. Holzapfel
3D finite element analysis of smooth muscle contraction considering calcium diffusion
10th International Conference on Computational Plasticity, 1-4, (2009)
M. Böl, S. Reese
A direction dependent approach to the modeling of shape memory polymers
Constitutive Models for Rubber VI, Eds.: G. Heinrich, M. Kaliske, A. Lion, S. Reese, Taylor & Francis Group London, 443-448, (2009) [Link]
M. Böl, A. Pipetz, S. Reese
Finite element model for the simulation of skeletal muscle fatigue
Material Science and Engineering Technology, 40, 5-12, (2009) [Link]
M. Böl
Modeling muscles from the inside out
Biomedical Computation Review, 5(1), 5-6, (2009) [Link]
M. Böl, S. Reese, K. K. Parker, E. Kuhl
Computational modeling of muscular thin films for cardiac repair
Computational Mechanics, 43, 535-544, (2009) [Link]
M. Böl, R. B. Möhle, M. Haesner, T. R. Neu, H. Horn, R. Krull
3D Finite Element Model of Biofilm Detachment using Real Biofilm Structures from CLSM Data
Biotechnology & Bioengineering, 103(1), 177-186, (2009) [Link]
M. Böl, S. Reese
A finite element approach for the modelling of skeletal muscle fatigue
GAMM Communications, 32(2), 205-220, (2009) [Link]
T. Mahrholz, M. Sinapius , J. Stängle
Quantitation of the reinforcement effect of silica nanoparticles in epoxy resins used in liquid composite moulding processes
Composites Part A, 40 (3), S. 235-243, Elsevier Ltd, (2009) [Link]
S. Pansart, M. Sinapius, U. Gabbert
A comprehensive explanation of compression strength differences between various CFRP materials: Micro-meso model, predictions, parameter studies
Composites Part A, 40 (4), S. 376-387, (2009) [Link]
J. Riemenschneider, S. Opitz, M. Sinapius, H. P. Monner
Modeling of carbon nanotube actuators: Part II - Mechanical properties, electro mechanical coupling and validation of the model
Journal of Intelligent Material Systems and Structures, 20 (3), S. 251-364, Virginia Tech, USA, (2009) [Link]
J. Riemenschneider, S. Opitz, M. Sinapius, H. P. Monner
Modeling of carbon nanotube actuators: Part I - Modeling and Electrical properties
Journal of Intelligent Material Systems and Structures, 20 (2), S. 129-250, Virginia Tech, USA, (2009) [Link]
M. Böl, S. Reese
Micromechanical modelling of shape memory polymers
Advances in Science and Technology, 54, 137-142, (2008) [Link]
M. Böl, S. Reese
Micromechanical modelling of skeletal muscles based on the finite element method
Computer Methods in Biomechanics and Biomedical Engineering, 11, 489-504, (2008) [Link]
S. Reese, M. Böl, D. Christ
Multi-scale problems in biomechanics and medical technology
Proceedings of the ECCOMAS Thematic Conference on Multi-scale Computational Methods for Solids and Fluids, Eds.: A. Ibrahimbegovic, F. Dias, H. Matthies, P. Wriggers, ENS-Cachan, France, 216-220, (2007)
M. Böl, S. Reese
Micromechanical modelling of skeletal muscles: From the single fibre to the whole muscle
Proceedings of the 2nd GAMM Seminar on Continuum Biomechanics, Eds.: W. Ehlers, N. Karajan, Report of the University of Stuttgart, No. II-16, Verlag Glückauf Essen, 1-10, (2007) [Link]
M. Böl, S. Reese
Computer simulations of temperature induced shape memory polymers by means of the finite element method
Constitutive Models for Rubber V, Eds.: A. Boukamel, L. Laiarinandrasana, S. Meo, E. Verron, Taylor & Francis Group London, 93-99, (2007) [Link]
M. Böl, S. Reese
A new approach for the simulation of skeletal muscles using the tool of statistical mechanics
Material Science and Engineering Technology, 38, 955-964, (2007) [Link]
M. Böl, S. Reese
Numerical simulations of rubber-like materials under changing directions
Proceedings of the 3rd European Conference on Computational Mechanics, Paper ID 1440, Lisbon, Portugal, (2006) [Link]
M. Böl, S. Reese
A new approach for the simulation of damage effects in rubber-like materials using chain statistics
Proceedings of the 3rd European Conference on Computational Mechanics, Paper ID 1441, Lisbon, Portugal, (2006) [Link]
M. Böl, S. Reese
Finite element simulations of skeletal muscle behaviour under tetanic and non-tetanic conditions
Journal of Biomechanics, 39, S454, (2006) [Link]
S. Reese, M. Böl
Modelling of new materials in medical technology and biomechanics
Report of the Mathematical Institute Oberwolfach on the Workshop "Mechanics of Materials", Org.: R. Kienzler, D. McDowell, E. Werner, Oberwolfach, Germany, (2006)
S. Reese, M. Böl
Muskelkontraktion im virtuellen Experiment: wenn der Computer die Muskeln spielen lässt
RUBIN, 1/16, 49-56, (2006) [Link]
M. Böl, S. Reese
Finite element modelling of rubber-like polymers based on chain statistics
International Journal of Solids and Structures, 43, 2-26, (2006) [Link]
D. Göge, M. Sinapius
Experiences with dynamic load simulation by means of modal forces in the presence of structural non-linearities
Aerospace Science and Technology, 10, S. 411-419, (2006) [Link]
M. Böl, S. Reese
Computer simulations for the mechanical analysis of skeletal muscles
Proceedings in Applied Mathematics and Mechanics, 5, 291-292, (2005) [Link]
S. Reese, M. Böl
Computational testing and modelling of polymers and soft tissue using chain statistics
Constitutive Models for Rubber IV, Eds.: P. E. Austrell, K. Kari, A. A. Balkema Publishers, 155-164, (2005) [Link]
M. Böl, S. Reese
Simulation of filled polymer networks with reference to the Mullins effect
Constitutive Models for Rubber IV, Eds.: P. E. Austrell, K. Kari, A. A. Balkema Publishers, 165-170, (2005) [Link]
M. Böl, S. Reese, P. Meier, R. Blickhan
Skeletal muscle modeling by means of an innovative finite element technology
Proceedings of the 1st GAMM Seminar on Continuum Biomechanics, Eds.: W. Ehlers, B. Markert, Report of the University of Stuttgart, No. II-14, Verlag Glückauf Essen, 13-23, (2005)
M. Böl, S. Reese
Finite element modelling of rubber-like materials - a comparison between simulation and experiment
Journal of Materials Science, 40, 5933-5939, (2005) [Link]
M. Böl, S. Reese
New method for simulation of Mullins effect using finite element method
Plastics, Rubber and Composites, 34, 343-348, (2005) [Link]
D. Göge, U. Füllekrug, M. Sinapius, M. Link, L. Gaul
Advanced Test Strategy for Identification and Characterization of Nonlinearities of Aerospace Structure
AIAA Journal, Vol. 43 (5), S. 974-9986, (2005) [Link]
D. Göge, M. Sinapius, U. Füllekrug, M. Link
Detection and description of non-linear phenomena in experimental modal analysis via linearity plots
ELSEVIER - International Journal of Non-Linear Mechanics, 40, S. 27-48, (2005) [Link]
M. Böl, S. Reese
Simulation of particle filled polymer networks based on chain statistics under consideration of the Mullins effect
Proceedings in Applied Mathematics and Mechanics, 4, 242-243, (2004) [Link]
G. Gloth, M. Sinapius
Influence and characterisation of weak non-linearities in swept-sine modal testing
Aerospace Science and Technology, 8 (2), S. 111-120, (2004) [Link]
M. Sinapius, A. Brehmer
Measurement of real normal modes with adapted resolution by means of a continuously scanning laser vibrometer
ELSEVIER - Mechanical Systems and Signal Processing, 18 (5), S. 1203-1218, (2004) [Link]
M. Sinapius, G. Gloth
Analysis of swept-sine runs during modal identification
ELSEVIER - Mechanical Systems and Signal Processing, 18 (6), S. 1421-1441. (2004) [Link]
M. Böl, S. Reese
Computer simulation of particle filled polymer networks based on chain statistics with reference to stress-softening effects
Filler Reinforcement of Rubber including all Aspects of Fillers and Filler-Rubber Interactions, The Geological Society, London (UK), IOM Communications Ltd, 17-22, (2004)
M. Böl, S. Reese
Finite element simulation of rubber-like material behaviour under consideration of its microscopic structure
Proceedings in Applied Mathematics and Mechanics, 3, 256-257, (2003) [Link]
S. Reese, M. Böl
On a micromechanically-based finite element simulation of the viscoelastic and damage behaviour of rubber-like polymers
Constitutive Models for Rubber III, Eds.: J. J. C. Busfield, A. H. Muhr, A. A. Balkema Publishers, 213-220, (2003) [Link]
M. Böl, S. Reese
Finite element modelling of polymer networks based on chain statistics
Constitutive Models for Rubber III, Eds.: J. J. C. Busfield, A. H. Muhr, A. A. Balkema Publishers, 203-211, (2003) [Link]
M. Böl, S. Reese
Computer simulation of the inelastic behaviour of polymer networks
7th International Conference on Computational Plasticity, Eds.: E. Onate, D. R. J. Owen, Barcelona, Spain, (2003)
U. Füllekrug, M. Sinapius
Force Measurement in Vibration Testing - Applications to Modal Identification
International Journal of Acoustics and Vibration, 6 (2), S. 51-56, (2001) [Link]
G. Gloth, M. Degener, U. Füllekrug, J. Gschwilm, M. Sinapius, P. Fargette, B. Levadoux, P. Lubrina
Experimental Investigation of new GVT Concepts for Large Aircraft
Sound and Vibration, 35 (11), S. 14-18, (2001) [Link]
2024
J. Wiedemann, T. Pittsyk, O. Völkerink, C. Hühne
Limitations of cure cycle modifications for residual stress reduction in fiber metal laminates
3rd CIRP Conference on Composite Material Parts Manufacturing (CIRP CCMPM 2024), Braunschweig (Germany), September 2024
Z.J. Kozanecka, J. Liu, H. Buch, J. Gebauer, D. Rasch, Q. Liu, M. Böl, R. Krull
Enhanced productivity of filamentous pellets investigated with new tools for elucidation of oxygen uptake and morphology
14th European Symposium on Biochemical Engineering Sciences (ESBES), Copenhagen (Denmark), October 2024
O. Völkerink, P. A. Makiela, C. Hühne
How to model composite adherends in bonded joints for static strength analyses?
21st European Conference on Composite Materials (ECCM21), Nantes, France, 2024
P. A. Makiela, O. Völkerink, J. Kosmann, M. J. Schollerer, D. Holzhüter, C. Hühne
Validation of static residual strength analyses of fiber composite bonded joints
21st European Conference on Composite Materials (ECCM21), Nantes, France, 2024
P. Erdmann, L. Münch, M. Bastek , P. Middendorf, O. Völkerink
A numerical simulation method for impact damage and a mapping methodology for damage transfer in adhesively bonded joints
21st European Conference on Composite Materials (ECCM21), Nantes, France, 2024
M. Böl
Multiscale/multifield experiments and modelling in biomechanics - from the single cells to the whole organs
27. Japanese-German Symposium, Braunschweig, May 2024
Q. Liu, J.Liu, S. Kutschke, V. Kosmalla, D. Schürenkamp, N. Goseberg, M. Böl
Seasonal variation of Elymus for the assessment of ecosystem services
94. Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Magdeburg (Germany), March 2024
D. Hasselbeck, J. Liu, M. Böl
Location and layer-dependent biomechanical characterization of the porcine small intestine wall
94. Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Magdeburg (Germany), March 2024
R. Kilian, O. Völkerink, J. Steinmetz, C. Hühne
How to identify the hardening curve from tensile and simple shear tests of PVDF films for application in adhesive bondline modelling
94. Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Magdeburg (Germany), March 2024
Q. Liu, J. Liu, z. Kozanecka, R. Krull, M. Böl
On the morphological and mechanical properties of filamentous pellets along the culture process
94. Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Magdeburg (Germany), March 2024
M. Böl, K. Leichsenring, S. Kohn, R. Kuravi, A. E. Ehret
Experiments and modelling of skeletal muscle at different scales
4th BioMechBW, Workshop on Mechanobiology, Stuttgart, March 2024
2023
M. Böl, K. Leichsenring, S. Kohn, R. Kuravi, A. E. Ehret
Multiscale experiments and modelling of skeletal muscle - From the single fibre to the whole muscle
18th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Paris, May 2023
C. Krautwald, C. Schweiger, C. Windt, D. Schürenkamp, J. Liu, C. Lindemann, W. Isbert, B. H. Buck, M. Böl, N. Goseberg
Drag and Inertia Coefficients for Wave Loads on Artificially Biofouled Cylinders
4th Wind Energy Science Conference 2023, Glasgow, May 2023
2022
T. Siebert, M. Böl, S. Papenkort
Changes in 3D muscle architecture during growth: experiment and modelling
9th World Congress of Biomechanics 2022, Taipei, July 2022
M. Böl, K. Leichsenring, S. Kohn, R. Kuravi, A. E. Ehret
Multiscale experiments and modelling of skeletal muscle - From the single fibre to the whole muscle
EUROMECH Colloquium 627, Frankfurt (Germany), April 2022
2021
R. Seydewitz, L. Klemm, E. Morales-Orcajo, M. Böl
Multifield modelling and experimental analyses of smooth muscle tissue
Norddeutsches Mechanik Kolloquium 2021, Braunschweig, June 2021
S. Nagaraja, K. Leichsenring, M. Ambati, L. De Lorenzis, M. Böl
Phase-field modeling of fracture in small intestine
14th WCCM & ECCOMAS Virtual Congress 2020, January 2021
2020
M. Böl
Interdisciplinary biomechanics - Potential and aspects of multiscale-multifield approaches in experiment and modelling
DAAD Summer School "smARTerials - Smart Artificial Materials – digitally engineered", Chania, Crete Island (Greece), online, October 2020
2019
M. Böl
Skeletal muscle mechanics – experiment and simulation
Paris-Saclay University Biomechanics Seminar Series, École Polytechnique, Palaiseau (France), October 2019
M. Böl
Aspects of active muscle modelling - multi-scale/field modelling in biomechanics
International Autumn School 2019, Berlin (Germany), October 2019
M. Böl
Three-dimensional multiscale/field modelling in muscle mechanics - Challenges in modelling and experiment
24th Sports Science University Day of the DVS, Berlin (Germany), September 2019
F. Sewerin
Can the constituent stress-strain laws of composite materials be determined uniquely from integral measurements?
8th GACM Colloquium on Computational Mechanics, Kassel (Germany), August 2019
R. Kuravi, K. Leichsenring, M. Böl, A. E. Ehret
Studying skeletal muscle tissue response with 3D virtual samples reconstructed from histology
25th Congress of the European Society of Biomechanics, Vienna (Austria), July 2019
F. Sewerin
On the accuracy of the stochastic field method for estimating scalar statistics within the scope of the LES-transported PDF approach
17th International Conference on Numerical Combustion, Aachen (Germany), May 2019
M. Böl
Multiscale/field modelling in muscle mechanics - experiment versus simulation
Technical University of Munich, Munich (Germany), February 2019
R. Kuravi, A. Oswald, K. Leichsenring, M. Böl, A. E. Ehret
Histology-based semi-automated 3D reconstruction and simulation of skeletal muscle tissue
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Vienna (Austria), February 2019
L. Klemm, M. Bauer, E. Morales-Orcajo, R. Seydewitz, M. Böl
On the electro-chemo-mechanical modelling of stomach smooth muscle contraction
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Vienna (Austria), February 2019
J. Liu, H. Wiese, S. Scholl, W. Augustin, M. Böl
Comparison of the mechanical properties of milk fouling and whey protein fouling
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Vienna (Austria), February 2019
2018
F. Sewerin
On the accuracy and convergence properties of the stochastic field method
UK Fluids Conference 2018, Manchester (UK), September 2018
R. Seydewitz, T. Siebert, M.Böl
On the phenomenological modelling of history effects in skeletal muscles
13th World Congress in Computational Mechanics, New York City (USA), July 2018
E. Morales Orcajo, R. Seydewitz, T. Siebert, M Böl
Three-Dimensional Model for Smooth Muscle Contraction: Urinary Bladder Wall Application
13th World Congress in Computational Mechanics, New York City (USA), July 2018
R. Kuravi, K. Leichsenring, M. Böl, E. Mazza, A Ehret
Microscopy and computational analyses of meso-scale structure and its role for mechanics in skeletal muscle tissue
8th World Congress of Biomechanics, Dublin (Ireland), July 2018
K. Leichsenring, A. Ehret, M. Böl
Load transfer mechanisms in skeletal muscle – influence of connective tissue on the mechanical behaviour
8th World Congress of Biomechanics, Dublin (Ireland), July 2018
R. Seydewitz, E. Morales-Orcajo, T. Siebert, M Böl
On a three-dimensional mechano-electrochemical model for smooth muscle
8th World Congress of Biomechanics, Dublin (Ireland), July 2018
R. Kuravi, K. Leichsenring, M. Böl, A. Ehret
A histology based Investigation of passive mechanical response of skeletal muscle tissue incorporating of meso-scale structure
MaP Graduate Symposium, Zürich (Switzerland), June 2018
E. Morales Orcajo, R. Seydewitz, T. Siebert, M. Böl
On the three-dimensional modelling for urinary bladder smooth muscle contraction
6th European Conference on Computational Mechanics (ECCM 6), Glasgow (UK), June 2018
J. Liu, H. Wiese, J. Dittmann, W. Augustin, S. Scholl, M. Böl
A comparison of the mechanical constitutive behaviour of milk protein deposits and fouling deposits from raw milk
Fouling and Cleaning in Food Processing, Lund (Sweden), April 2018
M. Böl
Biomechanics - Multi-scale/field experimental approaches
University of Kassel, Kassel (Germany), April 2018
R. Seydewitz, T. Siebert, M. Böl
A phenomenological approach for modelling force enhancement and depression in skeletal muscle tissue
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Munich (Germany), March 2018
R. Trostorf, K. Leichsenring, R. Seydewitz, M. Böl
On the phenomenological modelling of potato tissue
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Munich (Germany), March 2018
R. Seydewitz, T. Siebert, M. Böl
Modelling force enhancement and force depression in skeletal muscle tissue
Norddeutsches Mechanik Kolloquium 2018, Braunschweig, January 2018
2017
M. Böl
Advanced experiments on biological systems at different length scales
ETH Zurich, Zurich (Zwitzerland), December 2017
F. Sewerin, P. Papadopoulos
An exact penalty approach for the finite element solution of frictionless contact problems
7th GACM Colloquium on Computational Mechanics, Stuttgart (Germany), October 2017
F. Sewerin, S. Rigopoulos
An LES-PBE-PDF approach for predicting soot particle size distributions in a turbulent diffusion flame
16th International Conference on Numerical Combustion, Orlando (USA), April 2017
M. Böl, J. Dittmann, D. Töpfer
On the mechanical characterisation of oocytes
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Weimar (Germany), March 2017
R. Seydewitz, E. Morales Orcajo, T. Siebert, M. Böl
Modelling the contraction properties of smooth muscle cells in bladder tissue
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Weimar (Germany), March 2017
M. Schulz, M. Böl
An objective and locking-free finite-element formulation for geometrically exact Kirchhoff rods
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Weimar (Germany), March 2017
K. Leichsenring, T. Siebert, M. Böl
Skeletal muscle growth in rabbit shank musculature - an experimental study
EUROMECH Colloquium 585, Warberg (Germany), February 2017
T. Siebert, A. Tomalka, K. Leichsenring, M. Böl
Changes in three dimensional muscle structure during growth
EUROMECH Colloquium 585, Warberg (Germany), February 2017
E. Morales Orcajo, R. Seydewitz, R. Menzel, T. Siebert, M. Böl
Urinary bladder – experimental characterisation and numerical modelling
EUROMECH Colloquium 585, Warberg (Germany), February 2017
J. Dittmann, D. Töpfer, M. Böl
On the compressibility of the porcine zona pellucida
EUROMECH Colloquium 585, Warberg (Germany), February 2017
2016
A. Bolea Albero, J. Liang, M. Böl
Computational modelling of wound healing: Cell division and migration
5. Kolloquium Neuartige Synthese- und Formulierungsverfahren für schwerlösliche Arzneistoffe und empfindliche Biopharmazeutika (SynFoBiA), Braunschweig (Germany), October 2016
M. Böl
Interdisciplinary biomechanics - Potential and aspects of multiscale-multifield approaches in experiment and modelling
DAAD Summer School "Mechanics meets Informatics", Chania, Crete Island (Greece), July 2016
K. Leichsenring, T. Siebert, M. Böl
Experimental quantification of skeletal muscle growth in oryctolagus cuniculus
The 12th World Congress of Computational Mechanics (WCCM XII), Seoul (South Korea), July 2016
M. Böl, J. Dittmann, D. Töpfer
On the experimental measurement of oocyte mechanical properties
The 12th World Congress of Computational Mechanics (WCCM XII), Seoul (South Korea), July 2016
A. Bolea Albero, M. Böl
Phenomenological modelling of force enhancement and force depression in skeletal muscle contraction
The 12th World Congress of Computational Mechanics (WCCM XII), Seoul (South Korea), July 2016
K. Leichsenring, T. Siebert, M. Böl
Muscle growth – an experimental study
European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS), Crete Island (Greece), June 2016
A. Bolea Albero, M. Böl
On the modelling of finite growth at the cellular level
European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS), Crete Island (Greece), June 2016
M. Böl, J. Dittmann, D. Töpfer
On the mechanical testing of oocytes
European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS), Crete Island (Greece), June 2016
J. Dittmann, D. Töpfer, M. Böl
Experimental based material parameter identification of oocytes
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Braunschweig (Germany), March 2016
M. Schulz, M. Böl
Modeling the quasi-static mechanical behavior of the extensible worm-like chain in the finite-element framework
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Braunschweig (Germany), March 2016
R. Seydewitz, M. Böl
On an electrical-chemical-mechanical approach for modelling smooth muscle excitation in bladder tissue
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Braunschweig (Germany), March 2016
C. Weichert, K. Leichsenring, M. Ernst, C. Wick, T. Siebert, R. Blickhan, M. Böl
Three-dimensional reconstruction of M. gastrocnemius - taking a look at muscle contraction
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Braunschweig (Germany), March 2016
J. Liang, A. Bolea Albero, J. Füller, C. Müller-Goymann, M. Böl
Computational and experimental analysis of wound healing processes
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Braunschweig (Germany), March 2016
A. Bolea Albero, M. Böl
On the modelling of finite growth considering the mechanics of cell division
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Braunschweig (Germany), March 2016
J. Liang, A. Bolea Albero, M. Böl
Computational modelling of wound healing in epidermis on the basis of in vitro experiments
Neuartige Synthese- und Formulierungsverfahren für schwerlösliche Arzneistoffe und empfindliche Biopharmazeutika (SynFoBiA), Braunschweig (Germany), February 2016
2015
A. Bolea Albero, M. Böl
On the modelling of anisotropic growing materials with isotropic mechanical behavior
136. Norddeutsches Mechanik - Kolloquium, Magdeburg (Germany), July 2015
M. Böl, A. E. Ehret, K. Leichsenring, M. Ernst
Tissue-scale anisotropy and compressibility of soft tissues in semi-confined compression tests
9th European Solid Mechanics Conference (ESMC), Madrid (Spain), July 2015
M. Böl
Interdisziplinäre Mechanik - Muskelgewebe und Maschinenbau? Potenzial und Perspektiven der Multiskalen-Mehrfeld-Modellierung
Hochschulinformationstag der Technischen Universität Braunschweig, Braunschweig (Germany), May 2015
J. Liang, A. Bolea albero, M. Böl
Entwicklung und Validierung von Wachstumskinetiken für Wundheilungsprozesse
Neuartige Synthese- und Formulierungsverfahren für schwerlösliche Arzneistoffe und empfindliche Biopharmazeutika (SynFoBiA), Braunschweig (Germany), March 2015
A. Bolea Albero, M. Böl
Mechanics of cell-division: A new continuum model for growth inhomogeneities
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Lecce (Italy), March 2015
M. Böl, A. E. Ehret, K. Leichsenring, M. Ernst
Experimental testing of transversely isotropic biological tissues - interaction between fibre and matrix material
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Lecce (Italy), March 2015
M. Böl
Multi-scale/field modelling/experiments in biomechanics
GAMM Seminar on Continuum Biomechanics, Freudenstadt-Lauterbad (Germany), January 2015
2014
M. Böl, A. Ehret, R. Kruse
On a staggered iFEM approach for the consideration of friction in compression test of soft materials
7th World Congress of Biomechanics (WCB), Boston Massachusetts (USA), July 2014
M. Böl, A. Ehret, K. Leichsenring, C. Weichert, R. Kruse
On the anisotropy of skeletal muscle tissue under compression
7th World Congress of Biomechanics (WCB), Boston Massachusetts (USA), July 2014
M. Böl, R. Blickhan, T. Siebert
Skeletal muscle modelling - three-dimensional model validation
7th World Congress of Biomechanics (WCB), Boston Massachusetts (USA), July 2014
M. Böl, M. Sturmat, K. Leichsenring, T. Siebert
Three-dimensional muscle modelling - experiment and simulation
IUTAM Symposium on Mechanics of Soft Active Materials, Haifa (Israel), May 2014
R. Seydewitz, M. Böl
A continuum mechanics approach for modelling arbitrary degradation and erosion processes in polymers
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Erlangen (Germany), March 2014
A. Bolea Albero, M. Böl
Growing between barriers
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Erlangen (Germany), March 2014
2013
M. Böl
Effect of fluid flow on biofilms using numerical approaches
16th European Society of Endodontology (ESE) Congress, Lisbon (Portugal), September 2013
M. Böl, M. Sturmat, K. Leichsenring, T. Siebert, R. Blickhan
A new approach for model validation considering an optical measurement technique
19th Congress of the European Society of Biomechanics, Patras (Greece), August 2013
K. Leichsenring, T. Siebert, M. Böl, R. Blickhan
Quantification of the history dependence of force production in rabbit M. soleus
19th Congress of the European Society of Biomechanics, Patras (Greece), August 2013
R. Seydewitz, M. Böl
A continuum mechanics approach for the modelling of degradation and erosion processes
Euromech colloquium 550, Poitiers (France), July 2013
R. Seydewitz, M. Böl
Biodegradable polymers - a new modelling approach
8th European Conference on Constitutive Models for Rubber, San Sebastián (Spain), June 2013
M. Sturmat, C. Weichert, K. Leichsenring, T. Siebert, R. Blickhan, M. Böl
Skeletal Muscle Contraction – Experiment and Theory
18th International Symposium on Computational Biomechanics, Ulm (Germany), May 2013
K. Leichsenring, T. Siebert, M. Böl, R. Blickhan
Untersuchungen zur Abhängigkeit der Muskelkraft von der Kontraktionsgeschichte beim M. soleus des Kaninchens
8. Jahrestagung der Deutschen Gesellschaft für Biomechanik, Neu-Ulm (Germany), May 2013
R. Seydewitz, M. Böl
Continuum mechanics description of biodegradable and bioerodible polymers
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Novi Sad (Serbia), March 2013
A. Bolea Albero, M. Böl
On the Mechanics of Fluid-like Growth in Solid Materials
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Novi Sad (Serbia), March 2013
K. Leichsenring, T. Siebert, M. Böl, R. Blickhan
Die Abhängigkeit der Muskelkraft von der Kontraktionsgeschichte
Tagung der dvs-Sektion Biomechanik, Chemnitz (Germany), March 2013
M. Böl
Aspects of active muscle modelling - multi-scale/field modelling in biomechanics
EU Regional School 2012/2013, RWTH Aachen University, Aachen (Germany), January 2013
M. Böl, A. Bolea Albero, A. E. Ehret
Biofilm mechanics - constitutive modelling including growth
Colloquium of Water Chemistry and Water Technology, Karlsruhe Institute of Technology, Karlsruhe (Germany), January 2013
R. Seydewitz, M. Böl
On a new modelling approach for biodegradable polymers
131. Norddeutsches Mechanik - Kolloquium, Braunschweig (Germany), January 2013
2012
M. Böl, N. Hempel
Multiphase modelling of SMP stents
SFB 599 Colloquium, Hannover (Germany), November 2012
A. E. Ehret, A. Bolea Albero, M. Böl
A network model for studying the mechanics of biofilms
6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), Vienna (Austria), September 2012
A. Bolea Albero, Alexander E. Ehret, M. Böl
Volume growth modelling of biofilms in continuum mechanics
6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), Vienna (Austria), September 2012
M. Böl, Alexander E. Ehret, A. Bolea Albero
Mechanical characterisation of biofilm and their significance for material modelling
6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), Vienna (Austria), September 2012
M. Sturmat, C. Weichert, M. Böl
Optical experiments for muscle model validation
6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), Vienna (Austria), September 2012
A. E. Ehret, A. Bolea Albero, M. Böl
The challenge of testing and interpreting the mechanical behaviour of microbial biofilms – a critical review
Euromech Colloquium 534, Saint-Etienne (France), May 2012
R. Kruse, C. Weichert, T. Siebert, M. Böl
Muscle tissue under compression - The impact of precise sample geometry on parameter identification
Euromech Colloquium 534, Saint-Etienne (France), May 2012
M. Böl, M. Sturmat, C. Weichert, T. Siebert
Three-dimensional geometrical measurements of skeletal muscles during contraction
Euromech Colloquium 534, Saint-Etienne (France), May 2012
A. Bolea Albero, Alexander E. Ehret, M. Böl
A continuum model for biofilm growth
Physics of Fluids, University of Twente (The Netherlands), April 2012
A. E. Ehret, A. Bolea Albero, M. Böl
Modelling microbial biofilms with network models
Physics of Fluids, University of Twente (The Netherlands), April 2012
A. E. Ehret, A. Bolea Albero, M. Böl
On a continuum mechanical network model for microbial biofilms
Forschungsseminar Scientific Computing, TU Chemnitz (Germany), April 2012
A. Bolea Albero, Alexander E. Ehret, M. Böl
An adaptive model for isotropically growing tissues
Young Investigators Conference 2012 (ECCOMAS YIC2012), Aveiro (Portugal), April 2012
M. Sturmat, C. Weichert, T. Siebert, M. Böl
Skeletal muscles: Innovative experimental investigations and numerical modelling
Young Investigators Conference 2012 (ECCOMAS YIC2012), Aveiro (Portugal), April 2012
A. E. Ehret, A. Bolea Albero, M. Böl
Modelling the rheological behaviour of microbial biofilms
Young Investigators Conference 2012 (ECCOMAS YIC2012), Aveiro (Portugal), April 2012
K. Leichsenring, T. Siebert, M. Böl, R. Blickhan
Quantifizierung von History Effekten beim M. Soleus des Kaninchens
Symposium der dvs-Sektionen Biomechanik, Sportmotorik und Trainingswissenschaft, Münster (Germany), March 2012
R. Kruse, C. Weichert, M. Böl
Elastic properties of muscle tissue: comparison of an inverse finite element approach and homogeneous deformation
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Darmstadt (Germany), March 2012
A. Bolea Albero, Alexander E. Ehret, M. Böl
A continuum model for free growth in living materials
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Darmstadt (Germany), March 2012
M. Sturmat, C. Weichert, T. Siebert, M. Böl
Numerical investigations of muscle contraction by using an optical measurement technique
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Darmstadt (Germany), March 2012
N. Hempel, M. Böl
Multi-phase modeling of shape memory polymers
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Darmstadt (Germany), March 2012
A. E. Ehret, A. Bolea Albero, M. Böl
A network model for the EPS matrix of microbial biofilms
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Darmstadt (Germany), March 2012
2011
A. Bolea Albero, M. Böl
A coupled continuum model of biofilm growth
2nd International Conference on Material Modelling (ICMM2), Paris (France), September 2011
M. Sturmat, R. Weikert, C. Weichert, M. Böl
Electromechanical modelling of skeletal muscle contraction
Trends & Challenges in Computational Mechanics (TCCM), Padua (Italy), September 2011
M. Böl, M.Sturmat
Skeletal muscles modelling: from micro to macro
Arbeitskreis Mikrostrukturmechanik im Fachausschuss Computersimulation der DGM, Braunschweig (Germany), September 2011
M. Böl, A. Schmitz
On a coupled 3D finite-element-based model of smooth muscle contraction
IUTAM Symposium on Computer Models in Biomechanics From Nano to Macro, Stanford University, California (USA), August 2011
M. Sturmat, M. Böl
Investigations in electromechanical skeletal muscle contractions
17th International Symposium on Computational Biomechanics in Ulm (CBU 2011) [Best Paper Award], Ulm (Germany), July 2011
A. Bolea Albero, M. Böl
Computational modelling of biofilm growth
IV International Conference on Computational Methods for Coupled Problems in Science and Engineering (COUPLED PROBLEMS 2011), Kos (Greece), June 2011
K. Leichsenring, T. Siebert, M. Böl, R. Blickhan
Einfluss von Elastizitäten auf die Bestimmung der aktiven Muskeleigenschaften des M. soleus beim Kaninchen
Jahrestagung der DVS Sektion Biomechanik, Biomechanik - vom Muskelmodell bis zu angewandten Bewegungswissenschaft, Jena (Germany), April 2011
M. Böl, C. Weichert, M. Sturmat
Dreidimensionale Skelettmuskelmodellierung auf Basis der Finite-Elemente-Methode, Jahrestagung der DVS Sektion Biomechanik
Biomechanik - vom Muskelmodell bis zu angewandten Bewegungswissenschaft, Jena (Germany), April 2011
C. Weichert, K. Leichsenring, T. Siebert, R. Blickhan, M. Böl
Passive Muskeleigenschaften – Experiment und Simulation
Jahrestagung der DVS Sektion Biomechanik, Biomechanik - vom Muskelmodell bis zu angewandten Bewegungswissenschaft, Jena (Germany), April 2011
M. Böl, G. A. Holzapfel
On a coupled modelling approach for the description of smooth muscle contraction
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Graz (Austria), April 2011
M. Sturmat, M. Böl
Electromechanical modelling of skeletal muscle contractions
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Graz (Austria), April 2011
C. Weichert, M. Böl
Passive muscle behaviour - experimental and numerical investigations
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Graz (Austria), April 2011
A. Bolea Albero, M. Böl
A finite element model for biofilm growth
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Graz (Austria), April 2011
2010
A. Schmitz, G. A. Holzapfel, M. Böl
Finite Element modelling of smooth muscle contraction
3rd GAMM Seminar on Continuum Biomechanics, Freudenstadt-Lauterbad (Germany), November 2010
M. Böl, C. Weichert, M. Sturmat
Skeletal muscle modelling: From sarcomer to muscle contraction
6th World Congress on Biomechanics, Singapore, August 2010
M. Böl, R. Seydewitz
Soft tissue modelling using cell mechanics
6th World Congress on Biomechanics, Singapore, August 2010
C. Küpper, D. Güllmar, T. Siebert, K. Leichsenring, M. Böl, R. Blickhan
Utilization of MR diffusion tensor imaging to reconstruct the calf muscle architecture in Oryctolagus cuniculus
17th Congress of the European Society of Biomechanics, Edinburgh (UK), July 2010
R. Seydewitz, M. Böl
A new modelling approach for the description of tissues at cell level
126. Norddeutsches Mechanik - Kolloquium, Magdeburg (Germany), June 2010
M. Böl
Computational modelling of active tissues
Emmy Noether Group Computational Dynamics and Control, Technische Universität Kaiserslautern, Kaiserslautern (Germany), May 2010
C. Bertsch, A. Bolea Albero, M. Böl
3D modelling of biofilm structures using the finite element method
4th European Conference on Computational Mechanics (ECCM), Paris (France), May 2010
M. Böl, M. Sturmat, C. Weichert
Skeletal muscle tissues – experimental and numerical investigations
4th European Conference on Computational Mechanics (ECCM), Paris (France), May 2010
C. Bertsch, A. Bolea Albero, M. Böl
3D finite element modelling of realistic biofilm structures from CLSM-data
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Karlsruhe (Germany), March 2010
A. Bolea Albero, C. Bertsch, M. Böl
3D finite element analysis of biofilm growth considering nutrient diffusion
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Karlsruhe (Germany), March 2010
R. Seydewitz, M. Böl
A new modelling approach for the description of tissues at cell level
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Karlsruhe (Germany), March 2010
M. Sturmat, M. Böl
Experimental and numerical investigations in skeletal muscle modelling
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Karlsruhe (Germany), March 2010
C. Bertsch, M. Böl
Modelling of biofilm detachment on 3D geometries by means of fluid-structure interaction
III Workshop on applied and computational mathematics, Trujillo (Peru), January 2010
2009
M. Böl, F. E. Gunawan, G. A. Holzapfel
3D finite element analysis of smooth muscle contraction considering calcium diffusion
10th International Conference on Computational Plasticity, Barcelona (Spain), September 2009
M. Böl, A. E. Ehret, M. Itskov
On a constitutive continuum model for the active behaviour of skeletal muscles
7th EUROMECH Solid Mechanics Conference, Lisbon (Portugal), September 2009
M. Böl, S. Reese
A direction dependent approach to the modeling of shape memory polymers
6th European Conference on Constitutive Models for Rubber, Dresden (Germany), September 2009
M. Böl, A. E. Ehret, M. Itskov
A micromechanically based constitutive approach to the modelling of skeletal muscles
1st International Conference on Material Modelling, Dortmund (Germany), September 2009
M. Böl, F. E. Gunawan
Numerical modelling of fatigue effects in skeletal muscles
3rd GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry, Hannover (Germany), September 2009
A. E. Ehret, M. Böl, M. Itskov
A continuum constitutive model for skeletal muscle based on a polyconvex strain-energy function
10th US National Congress on Computational Mechanics, Columbus, Ohio (USA), July 2009
M. Böl
Modelling of skeletal muscle activation, fatigue and recovery
10th US National Congress on Computational Mechanics, Columbus, Ohio (USA), July 2009
S. Reese, D. Christ, M. Böl, J. Frischkorn
Finite element simulation of coated stents
Collquium des SFB 499, University of Hannover, Hannover (Germany), June 2009
M. Böl
Finite Element Modelling of Shape Memory Polymers (SMPs)
German-American Frontiers of Engineering Symposium, Potsdam (Germany), April 2009
S. Reese, D. Christ, M. Böl
Stent implants - modelling and further ideas
4th Polish-German Winter Colloquium, La Clusaz (France), March 2009
S. Reese, C. Bertsch, M. Böl, D. Christ, J. Frischkorn, M. Schwarze, V. Tini, I. Vladimirov
Innovative Applications of Mechanics in Technical Sciences
Eidgenössisch Technische Hochschule Zürich, Zürich (Switzerland), March 2009
M. Böl, S. Reese
Finite Element Approaches for the Modelling of Shape Memory Polymers
Zentrum für Biomaterialentwicklung, Institut für Polymerforschung, GKSS-Forschungszentrum Geesthacht GmbH, Teltow (Germany), March 2009
M. Böl
Computational Analysis of Muscle Tissue Activation
Graz University of Technology, Graz (Austria), February 2009
M. Böl, A. E. Ehret, M. Itskov
On a constitutive approach for the skeletal muscle modelling
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Gdansk (Poland), February 2009
M. Böl
Active Soft Tissues - From Single Fibres to Muscle Contraction
Hamburg University of Applied Sciences, Hamburg (Germany), January 2009
2008
S. Reese, M. Böl, D. Christ
On the modelling of smart materials in medical technology
18th International Symposium on Computational Mechanics of Materials, Beiing (China), October 2008
S. Reese, M. Böl
Kaputtes Herz, zuckender Muskel - heilen mit dem Computer?
Vortrag im Rahmen des Studium generale 2008 der Technischen Universität Braunschweig, Braunschweig (Germany), October 2008
S. Reese, M. Böl
Finite element-based multiscale modelling of phase interactions in filler reinforced elastomers
Euromech Colloquium 502 on Reinforced Elastomers, Dresden (Germany), September 2008
S. Reese, C. Bertsch, M. Böl, D. Christ, J. Frischkorn, C. Rickelt, M. Schwarze, I. Vladimirov
Innovative Anwendungen der Mechanik im Ingenieurwesen
Fakultät für Bauingenieurwesen, RWTH Aachen, Aachen (Germany), September 2008
S. Reese, G. Silber, D. Christ, M. Böl
Stent implants - modelling and numerical issues
8th World Conference on Computational Mechanics, Venice (Italy), July 2008
M. Böl, S. Reese, K. K. Parker, E. Kuhl
Three-Dimensional Muscle Modelling
8th World Conference on Computational Mechanics, Venice (Italy), July 2008
M. Böl, K. K. Parker, E. Kuhl
Computational modelling of muscular thin films for cardiac repair
University of Essen-Duisburg, Essen (Germany), July 2008
M. Böl, S. Reese
Micromechanical modelling of shape memory polymers
3rd International Conference Smart Materials, Structures & Systems, Sicily (Italy), June 2008
M. Böl, A. Pipetz, S. Reese
Modelling of skeletal muscle activation, fatigue and recovery
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Bremen (Germany), April 2008
R. B. Möhle, M. Böl, K. Zapf, M. Kowalewski, M. Haesner, T. R. Neu, R. Krull, H. Horn, D. C. Hempel
Mathematische Modellierung und experimentelle Validierung von Biofilmsystemen - Besseres Prozessverständnis durch iterative Methode
DECHEMA Konferenz (Modellierung: Von der Zelle zum Prozess), Bremen (Germany), April 2008
M. Böl, S. Reese
Micro-Macro Modelling: From Sarcomere to Muscles Contraction
Simbios Seminar, Stanford University, Stanford (USA), March 2008
M. Böl, A. Pipetz, S. Reese
Modelling of skeletal muscle activation, fatigue and recovery
10th International Symposium on Biomaterials: Fundamentals and Clinical Applications, Essen (Germany), March 2008
S. Reese, M. Böl, D. Christ
Mehrskalenprobleme in der Biomechanik und Medizintechnik - Stentimplantate
121. Norddeutsches Mechanik-Kolloquium, Braunschweig (Germany), February 2008
2007
M. Böl
On a three-dimensional muscle modelling approach
University of Cologne, Köln (Germany), December 2007
M. Böl
Skeletal muscle modelling - from sarcomere to whole muscles -
Ulm University, Ulm (Germany), December 2007
M. Böl
Micromechanical Modelling in Biomechanics -Skeletal Muscles and Biofilms-
RWTH Aachen University, Aachen (Germany), November 2007
M. Böl
A 3-D muscle modelling approach using the finite element method
Friedrich-Schiller-Universität Jena, Jena (Germany), November 2007
S. Reese, M. Böl, D. Christ
Multi-scale problems in biomechanics and medical technology - stent implants
ECCOMAS Thematic Conference on Multi-scale Computational Methods for Solids and Fluids, Cachan (France), November 2007
A. Pipetz, M. Böl, S. Reese
Simulation of the physiological behaviour of skeletal muscles
2nd GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry, München (Germany), October 2007
M. Böl, S. Reese
On a dynamical modelling of skeletal muscle fatigue and recovery by means of the finite element method
2nd GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry, München (Germany), October 2007
M. Böl, S. Reese
Micromechanical modelling and computational testing of skeletal muscles
9th International Conference on Computational Plasticity, Barcelona (Spain), September 2007
M. Böl, S. Reese
Computer simulations of temperature induced shape memory polymers by means of the finite element method
5th European Conference on Constitutive Models for Rubber, Paris (France), September 2007
M. Böl, S. Reese
A new method for the simulation of shape memory polymers
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Zürich (Switzerland), July 2007
M. Böl, D. Christ, S. Reese
Coupled problems in biomechanics and medical technology
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Zürich (Switzerland), July 2007
S. Reese, M. Böl
Mikro-Makro-Modellierung von gummiartigen Polymeren mit finiten Elementen
Fortbildungsseminar des Deutschen Institutes für Kautschuktechnologie e.V., Hannover (Germany), June 2007
M. Böl, S. Reese
On a mesomechanical modelling of skeletal muscles
Modelling of Heterogeneous Materials with Applications in Construction and Biomedical Engineering, Prague (Czech Republic), June 2007
M. Böl, S. Reese
Computational testing of shape memory polymer networks
First Seminar on the Mechanics of Multifunctional Materials, Bad Honnef (Germany), May 2007
M. Böl, S. Reese, D. Christ
Shape memory polymers - modelling and simulation
AK Stoffgesetze, Paderborn (Germany), April 2007
2006
M. Böl
Statistical mechanics -from rubber-like materials to skeletal muscles-
Erster Workshop junger Nachwuchswissenschaftler in der Mechanik, Essen (Germany), December 2006
M. Böl, S. Reese
Micromechanical modelling of skeletal muscles: From the single fibre to the whole muscle
2nd GAMM Seminar on Continuum Biomechanics, Freudenstadt-Lauterbad (Germany), November 2006
S. Reese, M. Böl
Skeletal muscles: micromechanical modelling and computational testing
International Symposium on Biomaterials 2006, Annual Meeting of the German Society of Biomaterials e. V. (DGBM), Essen (Germany), September 2006
S. Reese, D. Christ, M. Böl
Simulation of shape memory polymers by means of the finite element method
7th European Symposium on Martensitic Transformations and Shape Memory Alloys, Bochum (Germany), September 2006
S. Reese, M. Böl, D. Christ, M. Schwarze
Innovative materials - theory and computation
Plenary lecture, 6th European Solid Mechanics Conference, Budapest (Hungary), August 2006
M. Böl, S. Reese
Finite element simulations of skeletal muscle behaviour under tetanic and non-tetanic conditions
5th World Congress of Biomechanics, Munich (Germany), July 2006
M. Böl, S. Reese
Numerical simulations of rubber-like materials under changing directions
3rd European Conference on Computational Mechanics, Lisbon (Portugal), June 2006
M. Böl, S. Reese
A new approach for the simulation of damage effects in rubber-like materials using chain
3rd European Conference on Computational Mechanics, Lisbon (Portugal), June 2006
M. Böl
A new method for the simulations of filled and unfilled polymer networks with reference to the Mullins effect
University of Munich, Munich (Germany), April 2006
M. Böl, D. Christ, S. Reese
Simulation of shape memory polymers by means of the finite element method
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Berlin (Germany), March 2006
S. Reese, M. Böl
Modelling of new materials in medical technology and biomechanics
Workshop on "Mechanics of Materials", Oberwolfach (Germany), January 2006
2005
M. Böl
A new method for the simulation of rubber-like materials by means of the finite element method
University of Stuttgart, Stuttgart (Germany), November 2005
M. Böl, S. Reese
Modelling of the active and passive muscle behaviour by means of the finite element method
8th Symposium on Biomaterials and Biomechanics: Fundamental and Clinical Applications of the Working Group on "Biomaterials and Tissue Compatibility", Essen (Germany), September 2005
S. Reese, B. Svendsen, M. Böl
On a structured mixture model for muscle activation due to calcium diffusion
8th US National Congress on Computational Mechanics, Austin (USA), July 2005
S. Reese, M. Böl
Computational testing and modelling of rubber-like polymers using chain statistics
Plenary lecture, 4th European Conference on Constitutive Models for Rubber, Stockholm (Schweden), June 2005
M. Böl, S. Reese
Simulation of filled polymer networks with reference to the Mullins effect
4th European Conference on Constitutive Models for Rubber, Stockholm (Sweden), June 2005
S. Reese, M. Böl
New Developments in the Theoretical and Numerical Modelling of Elastomers
MATELCOMP Polymer Competence Centre Leoben, Leoben (Austria), April 2005
S. Reese, M. Böl, D. Christ, M. Schwarze
Applications of shape memory alloys in medical technology and biomechanics
Eidgenössische Technische Hochschule Zürich, Institut für Mechanische Systeme, Zürich (Switzerland), April 2005
M. Böl, S. Reese
Computer simulations for the mechanical analysis of skeletal muscles
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Luxembourg, March 2005
S. Reese, M. Böl, R. Blickhan, P. Meier
Workshop on porous media, biomechanics and related fields
Muscle modelling by means of polymer networks, Freudenstadt (Germany), March 2005
2004
M. Böl, S. Reese, P. Meier, R. Blickhan
Skeletal muscle modeling by means of an innovative finite element technology
1st GAMM Seminar on Continuum Biomechanics, Freudenstadt-Lauterbad (Germany), November 2004
S. Reese, M. Böl, D. Christ
Modellierung und Computersimulation von Stents und Muskelfasern
University of Hannover, Department of Mechanical Engineering, Hannover (Germany), October 2004
M. Böl, S. Reese
Computer simulation of particle filled polymer networks based on chain statistics with reference to stress-softening effects
Filler Reinforcement of Rubber including all Aspects of Fillers and Filler- Rubber Interactions, London (UK), September 2004
M. Böl, S. Reese
Simulation of particle filled polymer networks based on chain statistics
Euromech Colloquium 459: Mechanical behaviour of cellular solids, Nancy (France), June 2004
M. Böl, S. Reese
Meso-macro modelling or rubber-like polymer networks based on chain statistics
Université Pierre et Marie Curie, Paris (France), May 2004
M. Böl, S. Reese
Finite element modelling of filled and unfilled polymer networks based on chain statistics
Workshop on Continuum Mechanical Modelling and Numerical Methods, Sterzing (Italy), March 2004
M. Böl, S. Reese
Simulation of particle filled polymer networks based on chain statistics under consideration of the Mullins' effect
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Dresden (Germany), March 2004
2003
M. Böl, S. Reese
Simulation of filled and unfilled polymer networks by means of the finite element method
5th Humboldt-Seminar, Halle (Germany), November 2003
M. Böl, S. Reese
Finite element modelling of polymer networks based on chain statistics
3th European Conference on Constitutive Models for Rubber, London (UK), September 2003
M. Böl, S. Reese
Finite element simulation of rubber-like polymer networks under micro-mechanical aspects
5th European Solid Mechanics Conference, Thessaloniki (Greece), August 2003
M. Böl, S. Reese
Computer simulation of the inelastic behaviour of polymer networks
7th International Conference on Computational Plasticity, Barcelona (Spain), April 2003
M. Böl, S. Reese
Finite element simulation of rubber-like material behaviour under consideration of its microscopic structure
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Padova (Italy), March 2003
2002
M. Böl, S. Reese
Computer simulation of polymer networks by means of finite elements
Constitutive Equations for Polymer Microcomposites, Vienna (Austria), July 2002
J. Wiedemann, T. Pittsyk, O. Völkerink, C. Hühne
Limitations of cure cycle modifications for residual stress reduction in fiber metal laminates
3rd CIRP Conference on Composite Material Parts Manufacturing (CIRP CCMPM 2024), Braunschweig (Germany), September 2024
Z.J. Kozanecka, J. Liu, H. Buch, J. Gebauer, D. Rasch, Q. Liu, M. Böl, R. Krull
Enhanced productivity of filamentous pellets investigated with new tools for elucidation of oxygen uptake and morphology
14th European Symposium on Biochemical Engineering Sciences (ESBES), Copenhagen (Denmark), October 2024
O. Völkerink, P. A. Makiela, C. Hühne
How to model composite adherends in bonded joints for static strength analyses?
21st European Conference on Composite Materials (ECCM21), Nantes, France, 2024
P. A. Makiela, O. Völkerink, J. Kosmann, M. J. Schollerer, D. Holzhüter, C. Hühne
Validation of static residual strength analyses of fiber composite bonded joints
21st European Conference on Composite Materials (ECCM21), Nantes, France, 2024
P. Erdmann, L. Münch, M. Bastek , P. Middendorf, O. Völkerink
A numerical simulation method for impact damage and a mapping methodology for damage transfer in adhesively bonded joints
21st European Conference on Composite Materials (ECCM21), Nantes, France, 2024
M. Böl
Multiscale/multifield experiments and modelling in biomechanics - from the single cells to the whole organs
27. Japanese-German Symposium, Braunschweig, May 2024
Q. Liu, J.Liu, S. Kutschke, V. Kosmalla, D. Schürenkamp, N. Goseberg, M. Böl
Seasonal variation of Elymus for the assessment of ecosystem services
94. Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Magdeburg (Germany), March 2024
D. Hasselbeck, J. Liu, M. Böl
Location and layer-dependent biomechanical characterization of the porcine small intestine wall
94. Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Magdeburg (Germany), March 2024
R. Kilian, O. Völkerink, J. Steinmetz, C. Hühne
How to identify the hardening curve from tensile and simple shear tests of PVDF films for application in adhesive bondline modelling
94. Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Magdeburg (Germany), March 2024
Q. Liu, J. Liu, z. Kozanecka, R. Krull, M. Böl
On the morphological and mechanical properties of filamentous pellets along the culture process
94. Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Magdeburg (Germany), March 2024
M. Böl, K. Leichsenring, S. Kohn, R. Kuravi, A. E. Ehret
Experiments and modelling of skeletal muscle at different scales
4th BioMechBW, Workshop on Mechanobiology, Stuttgart, March 2024
M. Böl, K. Leichsenring, S. Kohn, R. Kuravi, A. E. Ehret
Multiscale experiments and modelling of skeletal muscle - From the single fibre to the whole muscle
18th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Paris, May 2023
C. Krautwald, C. Schweiger, C. Windt, D. Schürenkamp, J. Liu, C. Lindemann, W. Isbert, B. H. Buck, M. Böl, N. Goseberg
Drag and Inertia Coefficients for Wave Loads on Artificially Biofouled Cylinders
4th Wind Energy Science Conference 2023, Glasgow, May 2023
T. Siebert, M. Böl, S. Papenkort
Changes in 3D muscle architecture during growth: experiment and modelling
9th World Congress of Biomechanics 2022, Taipei, July 2022
M. Böl, K. Leichsenring, S. Kohn, R. Kuravi, A. E. Ehret
Multiscale experiments and modelling of skeletal muscle - From the single fibre to the whole muscle
EUROMECH Colloquium 627, Frankfurt (Germany), April 2022
R. Seydewitz, L. Klemm, E. Morales-Orcajo, M. Böl
Multifield modelling and experimental analyses of smooth muscle tissue
Norddeutsches Mechanik Kolloquium 2021, Braunschweig, June 2021
S. Nagaraja, K. Leichsenring, M. Ambati, L. De Lorenzis, M. Böl
Phase-field modeling of fracture in small intestine
14th WCCM & ECCOMAS Virtual Congress 2020, January 2021
M. Böl
Interdisciplinary biomechanics - Potential and aspects of multiscale-multifield approaches in experiment and modelling
DAAD Summer School "smARTerials - Smart Artificial Materials – digitally engineered", Chania, Crete Island (Greece), online, October 2020
M. Böl
Skeletal muscle mechanics – experiment and simulation
Paris-Saclay University Biomechanics Seminar Series, École Polytechnique, Palaiseau (France), October 2019
M. Böl
Aspects of active muscle modelling - multi-scale/field modelling in biomechanics
International Autumn School 2019, Berlin (Germany), October 2019
M. Böl
Three-dimensional multiscale/field modelling in muscle mechanics - Challenges in modelling and experiment
24th Sports Science University Day of the DVS, Berlin (Germany), September 2019
F. Sewerin
Can the constituent stress-strain laws of composite materials be determined uniquely from integral measurements?
8th GACM Colloquium on Computational Mechanics, Kassel (Germany), August 2019
R. Kuravi, K. Leichsenring, M. Böl, A. E. Ehret
Studying skeletal muscle tissue response with 3D virtual samples reconstructed from histology
25th Congress of the European Society of Biomechanics, Vienna (Austria), July 2019
F. Sewerin
On the accuracy of the stochastic field method for estimating scalar statistics within the scope of the LES-transported PDF approach
17th International Conference on Numerical Combustion, Aachen (Germany), May 2019
M. Böl
Multiscale/field modelling in muscle mechanics - experiment versus simulation
Technical University of Munich, Munich (Germany), February 2019
R. Kuravi, A. Oswald, K. Leichsenring, M. Böl, A. E. Ehret
Histology-based semi-automated 3D reconstruction and simulation of skeletal muscle tissue
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Vienna (Austria), February 2019
L. Klemm, M. Bauer, E. Morales-Orcajo, R. Seydewitz, M. Böl
On the electro-chemo-mechanical modelling of stomach smooth muscle contraction
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Vienna (Austria), February 2019
J. Liu, H. Wiese, S. Scholl, W. Augustin, M. Böl
Comparison of the mechanical properties of milk fouling and whey protein fouling
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Vienna (Austria), February 2019
F. Sewerin
On the accuracy and convergence properties of the stochastic field method
UK Fluids Conference 2018, Manchester (UK), September 2018
R. Seydewitz, T. Siebert, M.Böl
On the phenomenological modelling of history effects in skeletal muscles
13th World Congress in Computational Mechanics, New York City (USA), July 2018
E. Morales Orcajo, R. Seydewitz, T. Siebert, M Böl
Three-Dimensional Model for Smooth Muscle Contraction: Urinary Bladder Wall Application
13th World Congress in Computational Mechanics, New York City (USA), July 2018
R. Kuravi, K. Leichsenring, M. Böl, E. Mazza, A Ehret
Microscopy and computational analyses of meso-scale structure and its role for mechanics in skeletal muscle tissue
8th World Congress of Biomechanics, Dublin (Ireland), July 2018
K. Leichsenring, A. Ehret, M. Böl
Load transfer mechanisms in skeletal muscle – influence of connective tissue on the mechanical behaviour
8th World Congress of Biomechanics, Dublin (Ireland), July 2018
R. Seydewitz, E. Morales-Orcajo, T. Siebert, M Böl
On a three-dimensional mechano-electrochemical model for smooth muscle
8th World Congress of Biomechanics, Dublin (Ireland), July 2018
R. Kuravi, K. Leichsenring, M. Böl, A. Ehret
A histology based Investigation of passive mechanical response of skeletal muscle tissue incorporating of meso-scale structure
MaP Graduate Symposium, Zürich (Switzerland), June 2018
E. Morales Orcajo, R. Seydewitz, T. Siebert, M. Böl
On the three-dimensional modelling for urinary bladder smooth muscle contraction
6th European Conference on Computational Mechanics (ECCM 6), Glasgow (UK), June 2018
J. Liu, H. Wiese, J. Dittmann, W. Augustin, S. Scholl, M. Böl
A comparison of the mechanical constitutive behaviour of milk protein deposits and fouling deposits from raw milk
Fouling and Cleaning in Food Processing, Lund (Sweden), April 2018
M. Böl
Biomechanics - Multi-scale/field experimental approaches
University of Kassel, Kassel (Germany), April 2018
R. Seydewitz, T. Siebert, M. Böl
A phenomenological approach for modelling force enhancement and depression in skeletal muscle tissue
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Munich (Germany), March 2018
R. Trostorf, K. Leichsenring, R. Seydewitz, M. Böl
On the phenomenological modelling of potato tissue
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Munich (Germany), March 2018
R. Seydewitz, T. Siebert, M. Böl
Modelling force enhancement and force depression in skeletal muscle tissue
Norddeutsches Mechanik Kolloquium 2018, Braunschweig, January 2018
M. Böl
Advanced experiments on biological systems at different length scales
ETH Zurich, Zurich (Zwitzerland), December 2017
F. Sewerin, P. Papadopoulos
An exact penalty approach for the finite element solution of frictionless contact problems
7th GACM Colloquium on Computational Mechanics, Stuttgart (Germany), October 2017
Sadri, H., Schlums, H., Kruse, P., Sinapius, M.
Aktive Steuerung der Folienkrümmung in aerodynamischen Folienlagern mittels Flächenaktuatoren
Smarte Strukturen und Systeme : Tagungsband des 4SMARTS-Symposiums, 21.-22. Juni 2017, Braunschweig
F. Sewerin, S. Rigopoulos
An LES-PBE-PDF approach for predicting soot particle size distributions in a turbulent diffusion flame
16th International Conference on Numerical Combustion, Orlando (USA), April 2017
M. Böl, J. Dittmann, D. Töpfer
On the mechanical characterisation of oocytes
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Weimar (Germany), March 2017
R. Seydewitz, E. Morales Orcajo, T. Siebert, M. Böl
Modelling the contraction properties of smooth muscle cells in bladder tissue
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Weimar (Germany), March 2017
M. Schulz, M. Böl
An objective and locking-free finite-element formulation for geometrically exact Kirchhoff rods
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Weimar (Germany), March 2017
K. Leichsenring, T. Siebert, M. Böl
Skeletal muscle growth in rabbit shank musculature - an experimental study
EUROMECH Colloquium 585, Warberg (Germany), February 2017
T. Siebert, A. Tomalka, K. Leichsenring, M. Böl
Changes in three dimensional muscle structure during growth
EUROMECH Colloquium 585, Warberg (Germany), February 2017
E. Morales Orcajo, R. Seydewitz, R. Menzel, T. Siebert, M. Böl
Urinary bladder – experimental characterisation and numerical modelling
EUROMECH Colloquium 585, Warberg (Germany), February 2017
J. Dittmann, D. Töpfer, M. Böl
On the compressibility of the porcine zona pellucida
EUROMECH Colloquium 585, Warberg (Germany), February 2017
A. Bolea Albero, J. Liang, M. Böl
Computational modelling of wound healing: Cell division and migration
5. Kolloquium Neuartige Synthese- und Formulierungsverfahren für schwerlösliche Arzneistoffe und empfindliche Biopharmazeutika (SynFoBiA), Braunschweig (Germany), October 2016
M. Böl
Interdisciplinary biomechanics - Potential and aspects of multiscale-multifield approaches in experiment and modelling
DAAD Summer School "Mechanics meets Informatics", Chania, Crete Island (Greece), July 2016
K. Leichsenring, T. Siebert, M. Böl
Experimental quantification of skeletal muscle growth in oryctolagus cuniculus
The 12th World Congress of Computational Mechanics (WCCM XII), Seoul (South Korea), July 2016
M. Böl, J. Dittmann, D. Töpfer
On the experimental measurement of oocyte mechanical properties
The 12th World Congress of Computational Mechanics (WCCM XII), Seoul (South Korea), July 2016
A. Bolea Albero, M. Böl
Phenomenological modelling of force enhancement and force depression in skeletal muscle contraction
The 12th World Congress of Computational Mechanics (WCCM XII), Seoul (South Korea), July 2016
K. Leichsenring, T. Siebert, M. Böl
Muscle growth – an experimental study
European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS), Crete Island (Greece), June 2016
A. Bolea Albero, M. Böl
On the modelling of finite growth at the cellular level
European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS), Crete Island (Greece), June 2016
M. Böl, J. Dittmann, D. Töpfer
On the mechanical testing of oocytes
European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS), Crete Island (Greece), June 2016
J. Dittmann, D. Töpfer, M. Böl
Experimental based material parameter identification of oocytes
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Braunschweig (Germany), March 2016
M. Schulz, M. Böl
Modeling the quasi-static mechanical behavior of the extensible worm-like chain in the finite-element framework
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Braunschweig (Germany), March 2016
R. Seydewitz, M. Böl
On an electrical-chemical-mechanical approach for modelling smooth muscle excitation in bladder tissue
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Braunschweig (Germany), March 2016
C. Weichert, K. Leichsenring, M. Ernst, C. Wick, T. Siebert, R. Blickhan, M. Böl
Three-dimensional reconstruction of M. gastrocnemius - taking a look at muscle contraction
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Braunschweig (Germany), March 2016
J. Liang, A. Bolea Albero, J. Füller, C. Müller-Goymann, M. Böl
Computational and experimental analysis of wound healing processes
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Braunschweig (Germany), March 2016
A. Bolea Albero, M. Böl
On the modelling of finite growth considering the mechanics of cell division
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Braunschweig (Germany), March 2016
J. Liang, A. Bolea Albero, M. Böl
Computational modelling of wound healing in epidermis on the basis of in vitro experiments
Neuartige Synthese- und Formulierungsverfahren für schwerlösliche Arzneistoffe und empfindliche Biopharmazeutika (SynFoBiA), Braunschweig (Germany), February 2016
A. Bolea Albero, M. Böl
On the modelling of anisotropic growing materials with isotropic mechanical behavior
136. Norddeutsches Mechanik - Kolloquium, Magdeburg (Germany), July 2015
M. Böl, A. E. Ehret, K. Leichsenring, M. Ernst
Tissue-scale anisotropy and compressibility of soft tissues in semi-confined compression tests
9th European Solid Mechanics Conference (ESMC), Madrid (Spain), July 2015
M. Böl
Interdisziplinäre Mechanik - Muskelgewebe und Maschinenbau? Potenzial und Perspektiven der Multiskalen-Mehrfeld-Modellierung
Hochschulinformationstag der Technischen Universität Braunschweig, Braunschweig (Germany), May 2015
J. Liang, A. Bolea albero, M. Böl
Entwicklung und Validierung von Wachstumskinetiken für Wundheilungsprozesse
Neuartige Synthese- und Formulierungsverfahren für schwerlösliche Arzneistoffe und empfindliche Biopharmazeutika (SynFoBiA), Braunschweig (Germany), March 2015
A. Bolea Albero, M. Böl
Mechanics of cell-division: A new continuum model for growth inhomogeneities
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Lecce (Italy), March 2015
M. Böl, A. E. Ehret, K. Leichsenring, M. Ernst
Experimental testing of transversely isotropic biological tissues - interaction between fibre and matrix material
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Lecce (Italy), March 2015
M. Böl
Multi-scale/field modelling/experiments in biomechanics
GAMM Seminar on Continuum Biomechanics, Freudenstadt-Lauterbad (Germany), January 2015
M. Böl, A. Ehret, R. Kruse
On a staggered iFEM approach for the consideration of friction in compression test of soft materials
7th World Congress of Biomechanics (WCB), Boston Massachusetts (USA), July 2014
O. Unruh, C. Geweth
Experimental study of inhomogeneously damped plates with complex structural modes
Kongressbeitrag: The 21st International Congress on Sound and Vibration, 13.-17. Juli 2014, Beijing/China
M. Böl, A. Ehret, K. Leichsenring, C. Weichert, R. Kruse
On the anisotropy of skeletal muscle tissue under compression
7th World Congress of Biomechanics (WCB), Boston Massachusetts (USA), July 2014
M. Böl, R. Blickhan, T. Siebert
Skeletal muscle modelling - three-dimensional model validation
7th World Congress of Biomechanics (WCB), Boston Massachusetts (USA), July 2014
M. Böl, M. Sturmat, K. Leichsenring, T. Siebert
Three-dimensional muscle modelling - experiment and simulation
IUTAM Symposium on Mechanics of Soft Active Materials, Haifa (Israel), May 2014
R. Seydewitz, M. Böl
A continuum mechanics approach for modelling arbitrary degradation and erosion processes in polymers
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Erlangen (Germany), March 2014
A. Bolea Albero, M. Böl
Growing between barriers
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Erlangen (Germany), March 2014
M. Böl
Effect of fluid flow on biofilms using numerical approaches
16th European Society of Endodontology (ESE) Congress, Lisbon (Portugal), September 2013
M. Böl, M. Sturmat, K. Leichsenring, T. Siebert, R. Blickhan
A new approach for model validation considering an optical measurement technique
19th Congress of the European Society of Biomechanics, Patras (Greece), August 2013
K. Leichsenring, T. Siebert, M. Böl, R. Blickhan
Quantification of the history dependence of force production in rabbit M. soleus
19th Congress of the European Society of Biomechanics, Patras (Greece), August 2013
R. Seydewitz, M. Böl
A continuum mechanics approach for the modelling of degradation and erosion processes
Euromech colloquium 550, Poitiers (France), July 2013
R. Seydewitz, M. Böl
Biodegradable polymers - a new modelling approach
8th European Conference on Constitutive Models for Rubber, San Sebastián (Spain), June 2013
M. Sturmat, C. Weichert, K. Leichsenring, T. Siebert, R. Blickhan, M. Böl
Skeletal Muscle Contraction – Experiment and Theory
18th International Symposium on Computational Biomechanics, Ulm (Germany), May 2013
K. Leichsenring, T. Siebert, M. Böl, R. Blickhan
Untersuchungen zur Abhängigkeit der Muskelkraft von der Kontraktionsgeschichte beim M. soleus des Kaninchens
8. Jahrestagung der Deutschen Gesellschaft für Biomechanik, Neu-Ulm (Germany), May 2013
R. Seydewitz, M. Böl
Continuum mechanics description of biodegradable and bioerodible polymers
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Novi Sad (Serbia), March 2013
A. Bolea Albero, M. Böl
On the Mechanics of Fluid-like Growth in Solid Materials
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Novi Sad (Serbia), March 2013
K. Leichsenring, T. Siebert, M. Böl, R. Blickhan
Die Abhängigkeit der Muskelkraft von der Kontraktionsgeschichte
Tagung der dvs-Sektion Biomechanik, Chemnitz (Germany), March 2013
M. Böl
Aspects of active muscle modelling - multi-scale/field modelling in biomechanics
EU Regional School 2012/2013, RWTH Aachen University, Aachen (Germany), January 2013
M. Böl, A. Bolea Albero, A. E. Ehret
Biofilm mechanics - constitutive modelling including growth
Colloquium of Water Chemistry and Water Technology, Karlsruhe Institute of Technology, Karlsruhe (Germany), January 2013
R. Seydewitz, M. Böl
On a new modelling approach for biodegradable polymers
131. Norddeutsches Mechanik - Kolloquium, Braunschweig (Germany), January 2013
M. Böl, N. Hempel
Multiphase modelling of SMP stents
SFB 599 Colloquium, Hannover (Germany), November 2012
A. E. Ehret, A. Bolea Albero, M. Böl
A network model for studying the mechanics of biofilms
6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), Vienna (Austria), September 2012
A. Bolea Albero, Alexander E. Ehret, M. Böl
Volume growth modelling of biofilms in continuum mechanics
6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), Vienna (Austria), September 2012
M. Böl, Alexander E. Ehret, A. Bolea Albero
Mechanical characterisation of biofilm and their significance for material modelling
6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), Vienna (Austria), September 2012
M. Sturmat, C. Weichert, M. Böl
Optical experiments for muscle model validation
6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), Vienna (Austria), September 2012
A. E. Ehret, A. Bolea Albero, M. Böl
The challenge of testing and interpreting the mechanical behaviour of microbial biofilms – a critical review
Euromech Colloquium 534, Saint-Etienne (France), May 2012
R. Kruse, C. Weichert, T. Siebert, M. Böl
Muscle tissue under compression - The impact of precise sample geometry on parameter identification
Euromech Colloquium 534, Saint-Etienne (France), May 2012
M. Böl, M. Sturmat, C. Weichert, T. Siebert
Three-dimensional geometrical measurements of skeletal muscles during contraction
Euromech Colloquium 534, Saint-Etienne (France), May 2012
A. Bolea Albero, Alexander E. Ehret, M. Böl
A continuum model for biofilm growth
Physics of Fluids, University of Twente (The Netherlands), April 2012
A. E. Ehret, A. Bolea Albero, M. Böl
Modelling microbial biofilms with network models
Physics of Fluids, University of Twente (The Netherlands), April 2012
A. E. Ehret, A. Bolea Albero, M. Böl
On a continuum mechanical network model for microbial biofilms
Forschungsseminar Scientific Computing, TU Chemnitz (Germany), April 2012
A. Bolea Albero, Alexander E. Ehret, M. Böl
An adaptive model for isotropically growing tissues
Young Investigators Conference 2012 (ECCOMAS YIC2012), Aveiro (Portugal), April 2012
M. Sturmat, C. Weichert, T. Siebert, M. Böl
Skeletal muscles: Innovative experimental investigations and numerical modelling
Young Investigators Conference 2012 (ECCOMAS YIC2012), Aveiro (Portugal), April 2012
A. E. Ehret, A. Bolea Albero, M. Böl
Modelling the rheological behaviour of microbial biofilms
Young Investigators Conference 2012 (ECCOMAS YIC2012), Aveiro (Portugal), April 2012
K. Leichsenring, T. Siebert, M. Böl, R. Blickhan
Quantifizierung von History Effekten beim M. Soleus des Kaninchens
Symposium der dvs-Sektionen Biomechanik, Sportmotorik und Trainingswissenschaft, Münster (Germany), March 2012
R. Kruse, C. Weichert, M. Böl
Elastic properties of muscle tissue: comparison of an inverse finite element approach and homogeneous deformation
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Darmstadt (Germany), March 2012
A. Bolea Albero, Alexander E. Ehret, M. Böl
A continuum model for free growth in living materials
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Darmstadt (Germany), March 2012
M. Sturmat, C. Weichert, T. Siebert, M. Böl
Numerical investigations of muscle contraction by using an optical measurement technique
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Darmstadt (Germany), March 2012
N. Hempel, M. Böl
Multi-phase modeling of shape memory polymers
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Darmstadt (Germany), March 2012
A. E. Ehret, A. Bolea Albero, M. Böl
A network model for the EPS matrix of microbial biofilms
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Darmstadt (Germany), March 2012
A. Bolea Albero, M. Böl
A coupled continuum model of biofilm growth
2nd International Conference on Material Modelling (ICMM2), Paris (France), September 2011
M. Sturmat, R. Weikert, C. Weichert, M. Böl
Electromechanical modelling of skeletal muscle contraction
Trends & Challenges in Computational Mechanics (TCCM), Padua (Italy), September 2011
M. Böl, M.Sturmat
Skeletal muscles modelling: from micro to macro
Arbeitskreis Mikrostrukturmechanik im Fachausschuss Computersimulation der DGM, Braunschweig (Germany), September 2011
M. Böl, A. Schmitz
On a coupled 3D finite-element-based model of smooth muscle contraction
IUTAM Symposium on Computer Models in Biomechanics From Nano to Macro, Stanford University, California (USA), August 2011
M. Sturmat, M. Böl
Investigations in electromechanical skeletal muscle contractions
17th International Symposium on Computational Biomechanics in Ulm (CBU 2011) [Best Paper Award], Ulm (Germany), July 2011
A. Bolea Albero, M. Böl
Computational modelling of biofilm growth
IV International Conference on Computational Methods for Coupled Problems in Science and Engineering (COUPLED PROBLEMS 2011), Kos (Greece), June 2011
K. Leichsenring, T. Siebert, M. Böl, R. Blickhan
Einfluss von Elastizitäten auf die Bestimmung der aktiven Muskeleigenschaften des M. soleus beim Kaninchen
Jahrestagung der DVS Sektion Biomechanik, Biomechanik - vom Muskelmodell bis zu angewandten Bewegungswissenschaft, Jena (Germany), April 2011
M. Böl, C. Weichert, M. Sturmat
Dreidimensionale Skelettmuskelmodellierung auf Basis der Finite-Elemente-Methode, Jahrestagung der DVS Sektion Biomechanik
Biomechanik - vom Muskelmodell bis zu angewandten Bewegungswissenschaft, Jena (Germany), April 2011
C. Weichert, K. Leichsenring, T. Siebert, R. Blickhan, M. Böl
Passive Muskeleigenschaften – Experiment und Simulation
Jahrestagung der DVS Sektion Biomechanik, Biomechanik - vom Muskelmodell bis zu angewandten Bewegungswissenschaft, Jena (Germany), April 2011
M. Böl, G. A. Holzapfel
On a coupled modelling approach for the description of smooth muscle contraction
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Graz (Austria), April 2011
M. Sturmat, M. Böl
Electromechanical modelling of skeletal muscle contractions
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Graz (Austria), April 2011
C. Weichert, M. Böl
Passive muscle behaviour - experimental and numerical investigations
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Graz (Austria), April 2011
A. Bolea Albero, M. Böl
A finite element model for biofilm growth
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Graz (Austria), April 2011
A. Schmitz, G. A. Holzapfel, M. Böl
Finite Element modelling of smooth muscle contraction
3rd GAMM Seminar on Continuum Biomechanics, Freudenstadt-Lauterbad (Germany), November 2010
M. Böl, C. Weichert, M. Sturmat
Skeletal muscle modelling: From sarcomer to muscle contraction
6th World Congress on Biomechanics, Singapore, August 2010
M. Böl, R. Seydewitz
Soft tissue modelling using cell mechanics
6th World Congress on Biomechanics, Singapore, August 2010
C. Küpper, D. Güllmar, T. Siebert, K. Leichsenring, M. Böl, R. Blickhan
Utilization of MR diffusion tensor imaging to reconstruct the calf muscle architecture in Oryctolagus cuniculus
17th Congress of the European Society of Biomechanics, Edinburgh (UK), July 2010
R. Seydewitz, M. Böl
A new modelling approach for the description of tissues at cell level
126. Norddeutsches Mechanik - Kolloquium, Magdeburg (Germany), June 2010
M. Böl
Computational modelling of active tissues
Emmy Noether Group Computational Dynamics and Control, Technische Universität Kaiserslautern, Kaiserslautern (Germany), May 2010
C. Bertsch, A. Bolea Albero, M. Böl
3D modelling of biofilm structures using the finite element method
4th European Conference on Computational Mechanics (ECCM), Paris (France), May 2010
M. Böl, M. Sturmat, C. Weichert
Skeletal muscle tissues – experimental and numerical investigations
4th European Conference on Computational Mechanics (ECCM), Paris (France), May 2010
C. Bertsch, A. Bolea Albero, M. Böl
3D finite element modelling of realistic biofilm structures from CLSM-data
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Karlsruhe (Germany), March 2010
A. Bolea Albero, C. Bertsch, M. Böl
3D finite element analysis of biofilm growth considering nutrient diffusion
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Karlsruhe (Germany), March 2010
R. Seydewitz, M. Böl
A new modelling approach for the description of tissues at cell level
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Karlsruhe (Germany), March 2010
M. Sturmat, M. Böl
Experimental and numerical investigations in skeletal muscle modelling
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Karlsruhe (Germany), March 2010
C. Bertsch, M. Böl
Modelling of biofilm detachment on 3D geometries by means of fluid-structure interaction
III Workshop on applied and computational mathematics, Trujillo (Peru), January 2010
M. Böl, F. E. Gunawan, G. A. Holzapfel
3D finite element analysis of smooth muscle contraction considering calcium diffusion
10th International Conference on Computational Plasticity, Barcelona (Spain), September 2009
M. Böl, A. E. Ehret, M. Itskov
On a constitutive continuum model for the active behaviour of skeletal muscles
7th EUROMECH Solid Mechanics Conference, Lisbon (Portugal), September 2009
M. Böl, S. Reese
A direction dependent approach to the modeling of shape memory polymers
6th European Conference on Constitutive Models for Rubber, Dresden (Germany), September 2009
M. Böl, A. E. Ehret, M. Itskov
A micromechanically based constitutive approach to the modelling of skeletal muscles
1st International Conference on Material Modelling, Dortmund (Germany), September 2009
M. Böl, F. E. Gunawan
Numerical modelling of fatigue effects in skeletal muscles
3rd GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry, Hannover (Germany), September 2009
A. E. Ehret, M. Böl, M. Itskov
A continuum constitutive model for skeletal muscle based on a polyconvex strain-energy function
10th US National Congress on Computational Mechanics, Columbus, Ohio (USA), July 2009
M. Böl
Modelling of skeletal muscle activation, fatigue and recovery
10th US National Congress on Computational Mechanics, Columbus, Ohio (USA), July 2009
S. Reese, D. Christ, M. Böl, J. Frischkorn
Finite element simulation of coated stents
Collquium des SFB 499, University of Hannover, Hannover (Germany), June 2009
M. Böl
Finite Element Modelling of Shape Memory Polymers (SMPs)
German-American Frontiers of Engineering Symposium, Potsdam (Germany), April 2009
S. Reese, D. Christ, M. Böl
Stent implants - modelling and further ideas
4th Polish-German Winter Colloquium, La Clusaz (France), March 2009
S. Reese, C. Bertsch, M. Böl, D. Christ, J. Frischkorn, M. Schwarze, V. Tini, I. Vladimirov
Innovative Applications of Mechanics in Technical Sciences
Eidgenössisch Technische Hochschule Zürich, Zürich (Switzerland), March 2009
M. Böl, S. Reese
Finite Element Approaches for the Modelling of Shape Memory Polymers
Zentrum für Biomaterialentwicklung, Institut für Polymerforschung, GKSS-Forschungszentrum Geesthacht GmbH, Teltow (Germany), March 2009
M. Böl
Computational Analysis of Muscle Tissue Activation
Graz University of Technology, Graz (Austria), February 2009
M. Böl, A. E. Ehret, M. Itskov
On a constitutive approach for the skeletal muscle modelling
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Gdansk (Poland), February 2009
M. Böl
Active Soft Tissues - From Single Fibres to Muscle Contraction
Hamburg University of Applied Sciences, Hamburg (Germany), January 2009
S. Reese, M. Böl, D. Christ
On the modelling of smart materials in medical technology
18th International Symposium on Computational Mechanics of Materials, Beiing (China), October 2008
S. Reese, M. Böl
Kaputtes Herz, zuckender Muskel - heilen mit dem Computer?
Vortrag im Rahmen des Studium generale 2008 der Technischen Universität Braunschweig, Braunschweig (Germany), October 2008
S. Reese, M. Böl
Finite element-based multiscale modelling of phase interactions in filler reinforced elastomers
Euromech Colloquium 502 on Reinforced Elastomers, Dresden (Germany), September 2008
S. Reese, C. Bertsch, M. Böl, D. Christ, J. Frischkorn, C. Rickelt, M. Schwarze, I. Vladimirov
Innovative Anwendungen der Mechanik im Ingenieurwesen
Fakultät für Bauingenieurwesen, RWTH Aachen, Aachen (Germany), September 2008
S. Reese, G. Silber, D. Christ, M. Böl
Stent implants - modelling and numerical issues
8th World Conference on Computational Mechanics, Venice (Italy), July 2008
M. Böl, S. Reese, K. K. Parker, E. Kuhl
Three-Dimensional Muscle Modelling
8th World Conference on Computational Mechanics, Venice (Italy), July 2008
M. Böl, K. K. Parker, E. Kuhl
Computational modelling of muscular thin films for cardiac repair
University of Essen-Duisburg, Essen (Germany), July 2008
M. Böl, S. Reese
Micromechanical modelling of shape memory polymers
3rd International Conference Smart Materials, Structures & Systems, Sicily (Italy), June 2008
M. Böl, A. Pipetz, S. Reese
Modelling of skeletal muscle activation, fatigue and recovery
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Bremen (Germany), April 2008
R. B. Möhle, M. Böl, K. Zapf, M. Kowalewski, M. Haesner, T. R. Neu, R. Krull, H. Horn, D. C. Hempel
Mathematische Modellierung und experimentelle Validierung von Biofilmsystemen - Besseres Prozessverständnis durch iterative Methode
DECHEMA Konferenz (Modellierung: Von der Zelle zum Prozess), Bremen (Germany), April 2008
M. Böl, S. Reese
Micro-Macro Modelling: From Sarcomere to Muscles Contraction
Simbios Seminar, Stanford University, Stanford (USA), March 2008
M. Böl, A. Pipetz, S. Reese
Modelling of skeletal muscle activation, fatigue and recovery
10th International Symposium on Biomaterials: Fundamentals and Clinical Applications, Essen (Germany), March 2008
S. Reese, M. Böl, D. Christ
Mehrskalenprobleme in der Biomechanik und Medizintechnik - Stentimplantate
121. Norddeutsches Mechanik-Kolloquium, Braunschweig (Germany), February 2008
M. Böl
On a three-dimensional muscle modelling approach
University of Cologne, Köln (Germany), December 2007
M. Böl
Skeletal muscle modelling - from sarcomere to whole muscles -
Ulm University, Ulm (Germany), December 2007
M. Böl
Micromechanical Modelling in Biomechanics -Skeletal Muscles and Biofilms-
RWTH Aachen University, Aachen (Germany), November 2007
M. Böl
A 3-D muscle modelling approach using the finite element method
Friedrich-Schiller-Universität Jena, Jena (Germany), November 2007
S. Reese, M. Böl, D. Christ
Multi-scale problems in biomechanics and medical technology - stent implants
ECCOMAS Thematic Conference on Multi-scale Computational Methods for Solids and Fluids, Cachan (France), November 2007
A. Pipetz, M. Böl, S. Reese
Simulation of the physiological behaviour of skeletal muscles
2nd GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry, München (Germany), October 2007
M. Böl, S. Reese
On a dynamical modelling of skeletal muscle fatigue and recovery by means of the finite element method
2nd GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry, München (Germany), October 2007
M. Böl, S. Reese
Micromechanical modelling and computational testing of skeletal muscles
9th International Conference on Computational Plasticity, Barcelona (Spain), September 2007
M. Böl, S. Reese
Computer simulations of temperature induced shape memory polymers by means of the finite element method
5th European Conference on Constitutive Models for Rubber, Paris (France), September 2007
M. Böl, S. Reese
A new method for the simulation of shape memory polymers
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Zürich (Switzerland), July 2007
M. Böl, D. Christ, S. Reese
Coupled problems in biomechanics and medical technology
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Zürich (Switzerland), July 2007
S. Reese, M. Böl
Mikro-Makro-Modellierung von gummiartigen Polymeren mit finiten Elementen
Fortbildungsseminar des Deutschen Institutes für Kautschuktechnologie e.V., Hannover (Germany), June 2007
M. Böl, S. Reese
On a mesomechanical modelling of skeletal muscles
Modelling of Heterogeneous Materials with Applications in Construction and Biomedical Engineering, Prague (Czech Republic), June 2007
M. Böl, S. Reese
Computational testing of shape memory polymer networks
First Seminar on the Mechanics of Multifunctional Materials, Bad Honnef (Germany), May 2007
M. Böl, S. Reese, D. Christ
Shape memory polymers - modelling and simulation
AK Stoffgesetze, Paderborn (Germany), April 2007
M. Böl
Statistical mechanics -from rubber-like materials to skeletal muscles-
Erster Workshop junger Nachwuchswissenschaftler in der Mechanik, Essen (Germany), December 2006
M. Böl, S. Reese
Micromechanical modelling of skeletal muscles: From the single fibre to the whole muscle
2nd GAMM Seminar on Continuum Biomechanics, Freudenstadt-Lauterbad (Germany), November 2006
S. Reese, M. Böl
Skeletal muscles: micromechanical modelling and computational testing
International Symposium on Biomaterials 2006, Annual Meeting of the German Society of Biomaterials e. V. (DGBM), Essen (Germany), September 2006
S. Reese, D. Christ, M. Böl
Simulation of shape memory polymers by means of the finite element method
7th European Symposium on Martensitic Transformations and Shape Memory Alloys, Bochum (Germany), September 2006
S. Reese, M. Böl, D. Christ, M. Schwarze
Innovative materials - theory and computation
Plenary lecture, 6th European Solid Mechanics Conference, Budapest (Hungary), August 2006
M. Böl, S. Reese
Finite element simulations of skeletal muscle behaviour under tetanic and non-tetanic conditions
5th World Congress of Biomechanics, Munich (Germany), July 2006
M. Böl, S. Reese
Numerical simulations of rubber-like materials under changing directions
3rd European Conference on Computational Mechanics, Lisbon (Portugal), June 2006
M. Böl, S. Reese
A new approach for the simulation of damage effects in rubber-like materials using chain
3rd European Conference on Computational Mechanics, Lisbon (Portugal), June 2006
M. Böl
A new method for the simulations of filled and unfilled polymer networks with reference to the Mullins effect
University of Munich, Munich (Germany), April 2006
M. Böl, D. Christ, S. Reese
Simulation of shape memory polymers by means of the finite element method
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Berlin (Germany), March 2006
S. Reese, M. Böl
Modelling of new materials in medical technology and biomechanics
Workshop on "Mechanics of Materials", Oberwolfach (Germany), January 2006
M. Böl
A new method for the simulation of rubber-like materials by means of the finite element method
University of Stuttgart, Stuttgart (Germany), November 2005
M. Böl, S. Reese
Modelling of the active and passive muscle behaviour by means of the finite element method
8th Symposium on Biomaterials and Biomechanics: Fundamental and Clinical Applications of the Working Group on "Biomaterials and Tissue Compatibility", Essen (Germany), September 2005
S. Reese, B. Svendsen, M. Böl
On a structured mixture model for muscle activation due to calcium diffusion
8th US National Congress on Computational Mechanics, Austin (USA), July 2005
S. Reese, M. Böl
Computational testing and modelling of rubber-like polymers using chain statistics
Plenary lecture, 4th European Conference on Constitutive Models for Rubber, Stockholm (Schweden), June 2005
M. Böl, S. Reese
Simulation of filled polymer networks with reference to the Mullins effect
4th European Conference on Constitutive Models for Rubber, Stockholm (Sweden), June 2005
S. Reese, M. Böl
New Developments in the Theoretical and Numerical Modelling of Elastomers
MATELCOMP Polymer Competence Centre Leoben, Leoben (Austria), April 2005
S. Reese, M. Böl, D. Christ, M. Schwarze
Applications of shape memory alloys in medical technology and biomechanics
Eidgenössische Technische Hochschule Zürich, Institut für Mechanische Systeme, Zürich (Switzerland), April 2005
M. Böl, S. Reese
Computer simulations for the mechanical analysis of skeletal muscles
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Luxembourg, March 2005
S. Reese, M. Böl, R. Blickhan, P. Meier
Workshop on porous media, biomechanics and related fields
Muscle modelling by means of polymer networks, Freudenstadt (Germany), March 2005
M. Böl, S. Reese, P. Meier, R. Blickhan
Skeletal muscle modeling by means of an innovative finite element technology
1st GAMM Seminar on Continuum Biomechanics, Freudenstadt-Lauterbad (Germany), November 2004
S. Reese, M. Böl, D. Christ
Modellierung und Computersimulation von Stents und Muskelfasern
University of Hannover, Department of Mechanical Engineering, Hannover (Germany), October 2004
M. Böl, S. Reese
Computer simulation of particle filled polymer networks based on chain statistics with reference to stress-softening effects
Filler Reinforcement of Rubber including all Aspects of Fillers and Filler- Rubber Interactions, London (UK), September 2004
M. Böl, S. Reese
Simulation of particle filled polymer networks based on chain statistics
Euromech Colloquium 459: Mechanical behaviour of cellular solids, Nancy (France), June 2004
M. Böl, S. Reese
Meso-macro modelling or rubber-like polymer networks based on chain statistics
Université Pierre et Marie Curie, Paris (France), May 2004
M. Böl, S. Reese
Finite element modelling of filled and unfilled polymer networks based on chain statistics
Workshop on Continuum Mechanical Modelling and Numerical Methods, Sterzing (Italy), March 2004
M. Böl, S. Reese
Simulation of particle filled polymer networks based on chain statistics under consideration of the Mullins' effect
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Dresden (Germany), March 2004
M. Böl, S. Reese
Simulation of filled and unfilled polymer networks by means of the finite element method
5th Humboldt-Seminar, Halle (Germany), November 2003
M. Böl, S. Reese
Finite element modelling of polymer networks based on chain statistics
3th European Conference on Constitutive Models for Rubber, London (UK), September 2003
M. Böl, S. Reese
Finite element simulation of rubber-like polymer networks under micro-mechanical aspects
5th European Solid Mechanics Conference, Thessaloniki (Greece), August 2003
M. Böl, S. Reese
Computer simulation of the inelastic behaviour of polymer networks
7th International Conference on Computational Plasticity, Barcelona (Spain), April 2003
M. Böl, S. Reese
Finite element simulation of rubber-like material behaviour under consideration of its microscopic structure
Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Padova (Italy), March 2003
M. Böl, S. Reese
Computer simulation of polymer networks by means of finite elements
Constitutive Equations for Polymer Microcomposites, Vienna (Austria), July 2002
