(eingereichte) Dissertationsschriften:
E. Adeli. Viscoplastic-Damage Model Parameter Identification via Bayesian Methods.
T. Cajuhi. Fracture in porous media: phase-field modeling, simulation and experimental validation.
C. Flack. Mehrfeldmodellierung von Beton mit diskreten Element Methoden.
S. Javidmehr. Shear Capacity of Concrete Members under Monotonic and Cyclic Diagonal Tension.
F. Ockelmann. Modellierung und numerische Analyse von Beton sowie faserverstärktem Ultrahochleistungsbeton mit der Diskrete Elemente Methode.
J. Unglaub: Einfluss von Eigenspannungen auf die Ermüdungsfestigkeit von großen Schrauben.
Veröffentlichungen in wissenschaftlichen Zeitschriften mit review:
E. Adeli, B. Rosić, H.G. Matthies and S. Reinstädler. Effect of Load Path on Parameter Identification for Plasticity Models using Bayesian Methods. QUIET, 2018.
E. Adeli, H.G. Matthies, S. Reinstädler and D. Dinkler. Bayesian Parameter Determination of a CT-Test described by a Viscoplastic-Damage Model considering the Model Error. DOI: 10.13140/RG.2.2.26924.82562, 2019.
E. Adeli, H.G. Matthies, S. Reinstädler and D. Dinkler. Comparison of Bayesian Methods on Parameter Identification for a Viscoplastic Model with Damage. DOI: 10.13140/RG.2.2.30280.26889, 2019.
E. Adeli and H.G. Matthies. Parameter Identification in Viscoplasticity using Transitional Markov Chain Monte Carlo Method. Probabilistic Engineering Mechanics, 2019.
G. Brachmann. Bemessungswerte der Betondruckfestigkeit unter Dauerlast. Beton- und Stahlbetonbau 112, Heft 7, S. 437, 2017.
T. Cajuhi, L. Sanavia and L. De Lorenzis. Phase-field modeling of fracture in variably saturated porous media. Computational Mechanics 61(3), 2018.[ DOI ]
P. Carrara, L. De Lorenzis and D.P. Bentz. Chloride diffusivity in hardened cement paste from microscale analyses and accounting for binding effects. Modelling and Simulation in Materials Science and Engineering 24, 065009, 2016.[ DOI ]
P. Carrara, T. Wu, R. Kruse and L. De Lorenzis. Towards multiscale modeling of the interaction between transport and fracture in concrete. RILEM Letters 1, S. 94-101, 2016.[ DOI ]
P. Carrara, T. Wu, R. Kruse and L. De Lorenzis. Chloride diffusivity of the interfacial transition zone and bulk paste in concrete from microscale analysis. Modelling and Simulation in Materials Science and Engineering 25, 045011, 2017.[ DOI ]
P. Carrara and L. De Lorenzis. Consistent identification of the interfacial transition zone in simulated cement microstructures. Cement and Concrete Composites 80, S. 224-234, 2017.[ DOI ]
P. Carrara, R. Kruse, D.P. Bentz, M. Lunardelli, T. Leusmann, P.A. Varadya and L. De Lorenzis. Improved mesoscale segmentation of concrete from 3D X-ray images using contrast enhancers. Cement and Concrete Composites, 93: 30-42, 2018.
I. Dreßler, X. Jin, H. Budelmann and B. Kasal. Zusammenhang von Adhäsion und Reinigung von Mikropartikeln auf strukturierten Oberflächen. Chemie Ingenieur Technik 2018; 90(3): 386-392.
V. Dunić, N. Busarac, V. Slavković, B. Rosić, R. Niekamp, H.G. Matthies, R. Slavković and Živković. A Thermo-Mechanically Coupled Finite Strain Model Considering Inelastic Heat Generation. Continuum Mechanics and Thermodynamics, 28: 993-1007, 2016.
M. Empelmann and J. Cramer. Modell zur Beschreibung der zeitabhängigen Rissbreitenentwicklung in Stahlbetonbauteilen. Beton- und Stahlbetonbau 114, Heft 5, S. 327-336, 2019.
S. Javidmehr. Zugtragwirkung von Beton bei der Querkrafttragfähigkeit von Bestandsbrücken. Beton- und Stahlbetonbau 112, Heft 7, S. 455, 2017.
S. Javidmehr, V. Oettel and M. Empelmann. Schrägrissbildung von Stahlbetonbalken unter Querkraftbeanspruchung. Bauingenieur 93, Heft 6, S. 248-254, 2018.
X. Jin and B. Kasal. Adhesion force mapping on wood by atomic force microscopy: influence of surface roughness and tip geometry. Royal Society Open Science 2016;10(3), 160248.
X. Jin and B. Kasal. Discussion about the data analysis and conclusion of the paper titled "Comparison of silicon and OH-modified AFM tips for adhesion force analysis on functionalised surfaces andnatural polymers". Colloids and Surfaces A: Physicochemical and Engineering Aspects 2017; 533: 354-355.
J.-P. Lanwer, V. Oettel, M. Empelmann, S. Höper, U. Kowalsky and D. Dinkler. Bond behavior of micro steel fibers embedded in ultra-high performance concrete subjected to monotonic and cyclic loading. Structural Concrete (Early View), S. 1-11, 2019.
S. Lenz, M. Geier and M. Krafczyk. An explicit gas kinetic scheme algorithm on non-uniform Cartesian meshes for GPGPU architectures. Computers & Fluids 186 (2019) 58-73.
S. Lenz, M. Schönherr, M. Geier, M. Krafczyk, A. Pasquali, A. Christen and M. Giometto. Towards real-time simulation of turbulent air flow over a resolved urban canopy using the cumulant lattice Boltzmann method on a GPGPU. Journal of Wind Engineering and Industrial Aerodynamics 189 (2019) 151-162.
S. Lenz, M. Krafczyk, M. Geier, S. Chen and Z. Guo. Validation of a two-dimensional gas-kinetic scheme for compressible natural convection on structured and unstructured meshes. International Journal of Thermal Sciences 136 (2019) 299-315.[ DOI ]
F. Marsili, P. Croce, N. Friedman, P. Fomichi and P. Landi: Seismic Reliability Assessment of a Concrete Water Tank Based on the Bayesian Updating of the Finite Element Model. Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering3.2 (2017), pp. 67-73.[ DOI ]
H.G. Matthies, E. Zander, B. Rosić, A. Litvinenko and O. Pajonk. Inverse Problems in a Bayesian Setting. Computational Methods for Solids and Fluids. Multiscale Analysis, Probability Aspects and Model Reduction, Adnan Ibrahimbegović (Eds.), 245-286, Springer, Berlin, 2016.
H.G. Matthies, E. Zander, B. Rosić and A. Litvinenko. Parameter Estimation via Conditional Expectation - A Bayesian Inversion. Advanced Modeling and Simulation in Engineering Sciences, 3:24, 2016.[ DOI ]
J. Müller, M. Grabowski, C. Müller, J. Hensel, J. Unglaub, H. Kloft, K. Thiele and K. Dilger. Design and parameter identification of Wire and Arc Additively Manufactured (WAAM) steel bars for use in construction. In: Metals 2019, 9(7), S. 725ff, 2019.
F. Ockelmann and D. Dinkler. A discrete element model for the investigation of the geometrically nonlinear behaviour of solids. Computational Particle Mechanics, 2017.
K. Pradeep, N. Friedman, E. Zandera and R. Radespiel. Bayesian Calibration of Volume Averaged RANS Model Parameters for Turbulen Flow Simulations Over Porous Materials. New Results in Numerical and Experimental Fluid Mechanics XI, Springer Verlag, pp 479-488, 2018.[ DOI ]
S. Reinstädler, U. Kowalskya and D. Dinkler. Analysis of landslides employing a space-time single-phase level-set method, Computer Methods in Applied Mechanics and Engineering 347, S. 639-662, 2019.
J. Remitz and M. Empelmann. Ermüdungsfestigkeit von eingebauten Spanngliedern - Versuche an Spannbetonträgern. Bauingenieur 90 (2015), Heft 12, S. 553-561.
J. Remitz and M. Empelmann. Einfluss von Umlenkbelastungen auf die Ermüdung von Spanngliedern im nachträglichen Verbund. Beton- und Stahlbetonbau 113 (2018), Heft 8, S. 579-588.
V. Rheinheimer, Y.P. Wu, T. Wu, K. Celik, J.Y. Wang, L. De Lorenzis, P. Wriggers, M.H. Zhang and P.J.M. Monteiro. Multi-scale study of high-strength low-thermal-conductivity cement composites containing cenospheres. Cement and Concrete Composites, 80:91-103, 2017.
K. Ritter, J. Unglaub and K. Thiele. Untersuchung der Mikroschädigung in Baustahl S355 mit ESPI. Bautechnik (im Druck), 2020.
B. Rosić, J. Sỳkora, O. Pajonk, A. Kučerová and H.G. Matthies. Comparison of Numerical Approaches to Bayesian Updating. Computational Methods for Solids and Fluids. Multiscale Analysis, Probability Aspects and Model Reduction, Adnan Ibrahimbegović (Eds.), 427-462, Springer, Berlin, 2016.
M.S. Sarfaraz, B. Rosić, H.G. Matthies and A. Ibrahimbegović. Stochastic upscaling via linear Bayesian updating. Coupled systems mechanics, 7(2): 211-231, 2018.
M.S. Sarfaraz, B. Rosić, H.G. Matthies and A. Ibrahimbegović. Stochastic Upscaling via Linear Bayesian Updating, In book: Multiscale Modeling of Heterogeneous Structures. J. Sorić, Jurica, P. Wriggers, and O. Allix (Eds.), 163-181, Springer, 2018.
J. Unglaub and K. Thiele: Stahlbau 2.0 - Selective-Blended-Learning im Ingenieurstudium. In: Kauffeld, S., Othmer, J. (Hg.): Innovative Lehre. Heidelberg: Springer.
J. Waeytens, B. Rosić, P.-E. Charbonnel, E. Merliot, D. Siegert, X. Chapeleau, R. Vidal, V. le Corvec and L.-M. Cottineau. Model updating techniques for damage detection in concrete beam using optical fiber strain measurement device. Engineering Structures, 129:2-10, 2016.
T. Wu and L. De Lorenzis. A phase-field approach to fracture coupled with diffusion. Computer Methods in Applied Mechanics and Engineering, 312:196-223, 2016.
T. Wu, A. Carpiuc-Prisacari, M. Poncelet and L. De Lorenzis. Phase-field simulation of interactive mixed-mode fracture tests on cement mortar with full-field displacement boundary conditions, Engineering Fracture Mechnics,182: 658-688, 2017.
Konferenzbeiträge mit Veröffentlichung:
E. Adeli, B. Rosić, H.G. Matthies and S. Reinstädler. Bayesian Parameter Identification in Plasticity. XIV International Conference on Computational Plasticity, COMPLAS 2017.
G. Brachmann and M. Empelmann. Bemessungswerte der Betondruckfestigkeit unter Dauerlast. Beiträge zur 5. DAfStb-Jahrestagung mit 58. Forschungskolloquium, Band 2, S. 130-140, Kaiserslautern, 2017.
G. Brachmann and M. Empelmann. Design Compressive Strength Values of Concrete Under Sustained Loads. Tagungsband zum fib Symposium 2017 Maastricht, S. 132 (bzw. Long Paper auf USB-Stick), Maastricht, 2017.
D. Busse and S. Javidmehr. Schubtragfähigkeit bestehender Brücken - Potenziale alternativer Nachweisformate. Seminarband zum VSVI-Seminar Nr. 10 "Brücken- und Ingenieurbau", S. 21-28, Braunschweig, 2016.
T. Cajuhi, P. Lura and L. De Lorenzis. Phase-field modeling of shrinkage cracks in cement-based materials. Proceedings of the 2nd International RILEM/COST Conference on Early Age cracking, 2017.
T. Cajuhi, P. Lura and L. De Lorenzis Preliminary calibration of a phase-field model for cracks due to shrinkage in cement-based materials. Proceedings of the 7th GACM, 2017.
P. Carrara, T. Wu and L. De Lorenzis. Chloride diffusivity of hardened cement paste from multiscale modeling. Proc. of International workshop Durability and Sustainability of Concrete Structures, Bologna, ltaly, 2015.
P. Carrara and L. De Lorenzis. Chloride diffusion and binding in hardened cement paste from microscale analyses. Proc. of International RILEM Conference on Materials, Systems and Structures in Civil Engineering Conference segment on Service life of Cement-Based Materials and Structures, Lyngby, Denmark, 2017.
P. Croce, P. Formichi, F. Landi, F. Marsili and N. Friedman. Effect of climate change on snow load on ground: Bayesian approach for snow map refinement. 14th International Probabilistic Workshop (pp. 231-244). Springer, Cham. 2017.
S. Dobrilla, N. Friedman, T. Rukavina, H.G. Matthies and A. Ibrahimbegovic. Probabilistic Analysis of Fiber Reinforced Concrete. Proceedings of the CILAMCE 2018 conference; Paris/ Compiègne, France (2018).
M. Empelmann and J. Cramer. Besondere Aspekte bei der Rissbreitenberechnung - Empfehlungen für die Praxis. Betonwerk + Fertigteil-Technik (BFT) International (2019), Heft 2, S. 87.
M. Empelmann, V. Oettel and J. Cramer. Crack widths in steel fibre concrete members with conventional reinforcement. Derkowski, W. et al. (Ed.): Proceedings of the fib Symposium 2019, S. 335-342, Krakau (Polen), 27.-29.05.2019.
M. Empelmann and J. Remitz. Neue Ergebnisse zum Ermüdungsverhalten von Betonfertigteilen - Verhalten von vorgespannten Betonfertigteilträgern. Kongressunterlagen 63. BetonTage, 19.-21.02.2019 in Neu-Ulm, Betonwerk + Fertigteil-Technik (BFT) International (2019), Heft 2, S. 64.
M. Empelmann and J. Cramer. Time-dependent development of crack widths in reinforced concrete structures. Derkowski, W. et al. (Ed.): Proceedings of the fib Symposium 2019, S. 621-628, , Krakau (Polen), 27.-29.05.2019.
C. Flack and D. Dinkler. Mehrfeldmodellierung von Beton mit der Diskrete Elemente Methode. In: Schneider J., Kiziltoprak N. (eds) Forschungskolloquium 2018 Grasellenbach. Springer Vieweg, Wiesbaden. 2018.
C. Flack and D. Dinkler. Towards multifield discrete element modeling of concrete structures. Proceedings in Applied Mathematics and Mechanics (PAMM). 2019. (accepted)
N. Friedman and E. Zander. Stochastic Analysis and Robust Optimization of a Reduced Order Model for Flow Control. SIAM Conference on Uncertainty Quantification, 16-19 April 2018, Garden Grove, CA USA. 2018.[ SIAM ]
S. Heinrich, U. Kowalsky and D. Dinkler. Multiscale damage analysis for steel structures. Proceedings in Applied Mathematics and Mechanics (PAMM), 16(1), 133-134, 2016.
T.V. Hoang, B. Rosić and H.G. Matthies. Characterisation and propagation of uncertainties accociated with limited data using a hierarchical parameteric probability box. PAMM 2018(1), pp. 1-2, 2018.
S. Höper, U. Kowalsky and D. Dinkler. Micro‐structure related modelling of ultra‐high‐performance fibre reinforced concrete (UHPFRC) subjected to cyclic tensile loading. Proceedings of Applied Mathematics and Mechanics 18 (1), S. 1-4, 2018.[ DOI ]
S. Höper, U. Kowalsky and D. Dinkler. Mikrophysikalisch begründete Modellierung der Verbundwirkung in faserbewehrtem Ultrahochleistungsbeton (UHPFRC) unter zyklischer Zugbeanspruchung. In: Jens Schneider und Nihat Kiziltoprak (Hg.): Forschungskolloquium 2018 Grasellenbach. Baustatik-Baupraxis e.V. Wiesbaden: Springer Fachmedien Wiesbaden, S. 35-36, 2018.
S. Höper, U. Kowalsky, D. Dinkler, J.-P. Lanwer, V. Oettel and M. Empelmann. Experimental and numerical investigations of UHPFRC under cyclic tensile loading. Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation (accepted). 2019.
S. Javidmehr and M. Empelmann. Zugtragwirkung von Beton bei der Querkrafttragfähigkeit von Bestandsbrücken - Bestimmung der Schrägrisslasten unter Querkraftbeanspruchung. Beiträge zur 5. DAfStb-Jahrestagung mit 58. Forschungskolloquium, Band 2, S. 1-11, Kaiserslautern, 2017.
S. Javidmehr and M. Empelmann. Diagonal cracking load of concrete members without shear reinforcement. Proceedings of the 12th fib International PhD Symposium in Civil Engineering, S. 457-465, Prag, 2018.
P. Kumar, N. Friedman, E. Zander and R. Radespiel. Bayesian Calibration of Volume Averaged RANS Model Parameters for Turbulent Flow Simulations Over Porous Materials. New Results in Numerical and Experimental Fluid Mechanics XI: Contributions to the 20th STAB/DGLR Symposium Braunschweig, Germany, 2016. Ed. by A. Dillmann, G. Heller, E. Krämer, C. Wagner, S. Bansmer, R. Radespiel, and R. Semaan. Cham: Springer International Publishing, 2017, pp. 479-488.[ DOI ]
F. Landi, F. Marsili, N. Friedman, and P. Croce. A comparison of stochastic inverse methods with sampling and functional based linear and non-linear update procedures. Beton und Stahlbau, Extended Abstracts of the 16th International Probabilistic Workshop 2018 in Vienna..
J.-P. Lanwer, V. Oettel, M. Empelmann, S. Höper, U. Kowalsky and D. Dinkler. Degradation processes of UHPFRC under cyclic tensile loading. In: Derkowski, W. et al. (Ed.): Proceedings of the 16th fib Symposium, S. 1912-1919. 2019.
T. Leusmann and H. Budelmann. Force distribution between interior steel reinforcement and externally bonded CFRP of RC beams under cyclic loading. 8th International Conference on FRP Composites in Civil Engineering (CICE 2016): 14-16 December 2016. Hong Kong Polytechnic University, Hong Kong.
T. Leusmann, H.W. Krauss and H. Budelmann. The hardening process of cement based materials observed by calorimetry and ultrasonic tests. 2nd International RILEM/COST conference on Early Age Cracking and Serviceability in Cement-based Materials and Structures (EAC2), 12.-14.09.2017 Brüssel.
T. Leusmann, G. Basutkar, M. Lunardelli and D. Lowke. Characterizing the 3D Mesostructure of High Performance Concrete with the help of Computed Tomography. Proceeding RILEM Spring convention and sustainable materials, systems and structures conference 2019.
M. Lunardelli, T. Leusmann and H. Budelmann. Improvement of debonding behavior among low strengthconcrete and externally bonded CFRP. CICE 2016 Proceedings (2016).
M. Lunardelli, P. Varady, D. Köhnke, S. Lehmberg and H. Budelmann. X-ray computed tomography: Image processing and applications. In: von Scheven, M.; Keip, M.-A.; Karajan, N. (Edt.): Proceedings of the 7th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry. October 11-13, 2017, Stuttgart, S. 39-43.
L. Mengel, D. Köhnke and H. Budelmann. Radiation effects on concrete. Research on Radioactive Waste Management, Ethics - Society - Technology. Final ENTRIA Conference, Braunschweig, September 2017.
A.H. Monnamitheen Abdul Gafoor and D Dinkler. A gradient-damage model for cyclic behavior of concrete. Proceedings of 63rd International Congress of Indian Society of Theoretical and Applied Mechanics (ISTAM), Dayananda Sagar Univeristy, Bangalore, India, Paper ID-159, 2018.
F. Ockelmann and D. Dinkler, A three-dimensional discrete element model for heterogeneous solids under mechanical loading. Proceedings in Applied Mathematics and Mechanics (PAMM), 16(1): 227-228, 2016.
J. Remitz and M. Empelmann. Ermüdungsnachweis der Bewehrung bei Spannbetonbauteilen. Seminarband zum VSVI-Seminar Nr. 10 "Brücken- und Ingenieurbau", S. 55-60, Braunschweig, 8. März 2016.
J. Remitz. Fatigue of Post-Tensioned Steel. Report of 4th IABSE Young Engineers Colloquium 2017, S.48-49, Bochum, 31.03.2017.
J. Remitz and M. Empelmann. Fatigue Life of Curved Tendons in Post-Tensioned Concrete Structures. In: Foster, S. (Ed.): Proceedings of fib Congress 2018, 07.-11.10.2018 in Melbourne (Australien), S. 342-343 (abstract, full paper digital).
J. Remitz and M. Empelmann. Specific Influences on Fatigue Life of Prestressing Steel. In: Hiller, E. (Ed.): 12th Japanese German Bridge Symposium - Volume of Abstracts and Full Papers, München, 04.-07.09.2018.
K. Ritter and K. Thiele. Monitoring Micro-damage Evolution in Structural Steel S355 using Speckle Interferometry. Proceedings of the 7th International Conference on Fracture Fatigue and Wear, Ghent, Springer Verlag, 2018.
K. Ritter and K. Thiele. Zur frühen Detektion von Ermüdungsrissen mithilfe der Speckle-Interferometrie. Tagungsband des 21. DASt-Forschungskolloquium, 2018.
B. Rosić and H.G. Matthies. Sparse Bayesian polynomial chaos approximations of elasto-plastic material models. COMPLAS 2017 Proceedings, E. Oñate, D.R.J. Owen, D. Peric and M. Chiumenti (Eds.), 256-267, CIMNE Barcelona, Spain, 2017.
B. Rosić, M.S. Sarfaraz and H.G. Matthies. Stochastic upscaling of random microstructures. PAMM, 17: 869-870, 2017.
B. Rosić, S.K. Shivanand, T.V. Hoang and H.G. Matthies. Iterative multilevel spectral identification of bone macroscopic properties described by probability box. PAMM 2018(1), pp. 1-4, 2018.
T. Stein, U. Kowalsky and D. Dinkler. Numerical analysis of reinforced concrete structures with particular focus on bond behaviour. Proceedings in Applied Mathematics and Mechanics (PAMM), Special Issue: 87th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), 16(1):241-242, 2016.
J. Unglaub, M. Reininghaus and K. Thiele. The fatigue behaviour of bolts with large diameters under overloading. The Eighth International Conference on Low Cycle Fatigue (LCF8) 27.- 29.06.2017 Dresden (2017).
J. Unglaub, J. Hensel, R. Wimpory, T. Nitschke-Pagel, K. Thiele and K. Dilger. Analysis of residual stress state in deep-rolled HT-Bolts. European Conference on Residual Stresses - ECRS10 - KU Leuven 2018 (2018).
J. Unglaub and K. Thiele. Fatigue Behavior of Large Rolled-After Heat-Treatment and Hot-Dip Galvanized HT Bolts. Proceedings of the ASME 2019 38th International. Conference on Ocean, Offshore and Arctic Engineering OMAE2019. June 9-14, 2019, Glasgow, Scotland, 2019.
J. Unglaub, H. Jahns and K. Thiele. Finite Element Analysis of Residual Stresses in Large Cold-Rolled Threads. XV International Conference on Computational Plasticity - COMPLAS 2019, September 3-5, 2019, Barcelona, Spain, 2019.
andere Veröffentlichungen:
T. Cajuhi et al. Drying of intact and cracked mortar samples using neutron imaging. ICON beamline, Report for Paul Scherrer Institute (PSI), 2018.
T. Cajuhi. Experimental tests on cracking induced by drying and autogenous shrinkage for validation of numerical framework. Report for COST Action TU1404, 2018.
N. Friedman. Optimisation of a CESTOL configuration under consideration of uncertainties. In: SFB 880 - Fundamentals of High-Lift for Future Commercial Aircraft - Biennial Report. Ed. by R. S. Rolf Radespiel. TU Braunschweig- Collaborative Research Centre SFB 880, 2017, pp. 163-175.
N. Friedman, E. Zander, J. Vondřejc and J. Rang: Robustness and Sensitivity Analysis of the reduced order model for Coandǎ blowing flow control by stochastic spectral methods". In:SFB 880 - Fundamentals of High-Lift for Future Commercial Aircraft -Biennial Report. Ed.by R.S.Rolf Radespiel.TU Braunschweig-Collaborative Research Centre SFB 880, 2017, pp. 206-215.
H. Jahns, J. Pons, K. Thiele, W. Flügge, M. Höfemann and H.C. Schmale. Zum Tragverhalten von Leichtbau-Flächentragwerken aus gekanteten, dünnwandigen Blechen. Stahlbau 87 (2018), S. 681-686.
J. Remitz and M. Empelmann. Dauerschwingfestigkeit von Spannstählen unter dynamischer Beanspruchung im eingebauten Zustand. Schlussbericht, Bauforschung Band T 3318, Fraunhofer IRB Verlag, 2015.
J. Unglaub, M. Reininghaus, K. Thiele. Zur Ermüdungsfestigkeit von feuerverzinkten Zugstäben mit Endgewinden. In: Stahlbau 84 (8), S. 584-588, 2015.