Technische Universität Braunschweig
  • Studium & Lehre
    • Vor dem Studium
      • Informationen für Studieninteressierte
      • Studiengänge von A-Z
      • Bewerbung
      • Fit4TU - Self-Assessment
      • Beratungsangebote für Studieninteressierte
      • Warum Braunschweig?
    • Im Studium
      • Erstsemester-Hub
      • Semestertermine
      • Lehrveranstaltungen
      • Studien-ABC
      • Studienorganisation
      • Beratungsnavi
      • Zusatzqualifikationen
      • Finanzierung und Kosten
      • Besondere Studienbedingungen
      • Gesundheit & Wohlbefinden
      • Campusleben
    • Nach dem Studium
      • Exmatrikulation und Vorlegalisation
      • Nach dem Abschluss
      • Alumni*ae
    • Strategien und Qualitätsmanagement
      • Qualitätsmanagement
      • Systemakkreditierung
      • Studienqualitätsmittel
      • TU Lehrpreis
    • Für Lehrende
      • Informationen für Lehrende
      • Konzepte
      • Lernmanagementsystem Stud.IP
    • Kontakt
      • Studienservice-Center
      • Sag's uns - in Studium und Lehre
      • Zentrale Studienberatung
      • Immatrikulationsamt
      • Abteilung 16 - Studium und Lehre
      • Career Service
      • Projekthaus
  • Forschung
    • Forschungsprofil
      • Forschungsschwerpunkte
      • Exzellenzcluster der TU Braunschweig
      • Forschungsprojekte
      • Forschungszentren
      • Forschungsprofile der Professuren
    • Frühe Karrierephase
      • Förderung in den frühen Phasen der wissenschaftlichen Karriere
      • Promotion
      • Postdocs
      • Nachwuchsgruppenleitung
      • Junior Professur und Tenure-Track
      • Habilitation
      • Service-Angebote für Wissenschaftler*innen
    • Forschungsdaten & Transparenz
      • Transparenz in der Forschung
      • Forschungsdaten
      • Open Access Strategie
      • Digitale Forschungsanzeige
    • Forschungsförderung
      • Netzwerk Forschungsförderung
      • Datenbanken und Stiftungen
    • Kontakt
      • Forschungsservice
      • Graduiertenakademie
  • International
    • Internationale Studierende
      • Warum Braunschweig?
      • Studium mit Abschluss
      • Austauschstudium
      • TU Braunschweig Summer School
      • Geflüchtete
      • International Student Support
      • International Career Service
    • Wege ins Ausland
      • Studium im Ausland
      • Praktikum im Ausland
      • Lehren und Forschen im Ausland
      • Arbeiten im Ausland
    • Internationale Forschende
      • Welcome Support for International Researchers
      • Service für gastgebende Einrichtungen
    • Sprachen und interkulturelle Kompetenzvermittlung
      • Deutsch lernen
      • Fremdsprachen lernen
      • Interkulturelle Kompetenzvermittlung
    • Internationales Profil
      • Internationalisierung
      • Internationale Kooperationen
      • Strategische Partnerschaften
      • Internationale Netzwerke
    • International House
      • Wir über uns
      • Kontakt & Sprechstunden
      • Aktuelles und Termine
      • International Days
      • 5. Studentische Konferenz: Internationalisierung der Hochschulen
      • Newsletter, Podcast & Videos
      • Stellenausschreibungen
  • Die TU Braunschweig
    • Unser Profil
      • Ziele & Werte
      • Ordnungen und Leitlinien
      • Allianzen & Partner
      • Hochschulentwicklung 2030
      • Internationale Strategie
      • Fakten & Zahlen
      • Unsere Geschichte
    • Karriere
      • Arbeiten an der TU
      • Stellenmarkt
      • Berufsausbildung an der TU
    • Wirtschaft & Unternehmen
      • Unternehmensgründung
      • Freunde & Förderer
    • Öffentlichkeit
      • Veranstaltungskalender
      • Check-in für Schüler*innen
      • Hochschulinformationstag (HIT)
      • CampusXperience
      • Kinder-Uni
      • Das Studierendenhaus
      • Gasthörer*innen & Senior*innenstudium
      • Nutzung der Universitätsbibliothek
    • Presse & Kommunikation
      • Stabsstelle Presse und Kommunikation
      • Medienservice
      • Ansprechpartner*innen
      • Tipps für Wissenschaftler*innen
      • Themen und Stories
    • Kontakt
      • Allgemeiner Kontakt
      • Anreise
      • Für Hinweisgeber
  • Struktur
    • Leitung & Verwaltung
      • Das Präsidium
      • Stabsstellen
      • Verwaltung
      • Organe, Statusgruppen und Kommissionen
    • Fakultäten
      • Carl-Friedrich-Gauß-Fakultät
      • Fakultät für Lebenswissenschaften
      • Fakultät Architektur, Bauingenieurwesen und Umweltwissenschaften
      • Fakultät für Maschinenbau
      • Fakultät für Elektrotechnik, Informationstechnik, Physik
      • Fakultät für Geistes- und Erziehungswissenschaften
    • Institute
      • Institute von A-Z
    • Einrichtungen
      • Universitätsbibliothek
      • Gauß-IT-Zentrum
      • Zentrale Personalentwicklung
      • International House
      • Projekthaus
      • Transferservice
      • Hochschulsportzentrum
      • Einrichtungen von A-Z
    • Studierendenschaft
      • Studierendenparlament
      • Fachschaften
      • Studentische Wahlen
    • Lehrer*innenbildung
      • Lehrer*innenfortbildung
      • Forschung
    • Chancengleichheit
      • Gleichstellung
      • Familie
      • Diversität
    • Kontakt
      • Personensuche
  • Suche
  • Schnellzugriff
    • Personensuche
    • Webmail
    • cloud.TU Braunschweig
    • Messenger
    • Mensa
    • TUconnect (Studierendenportal)
    • Lehrveranstaltungen
    • Im Notfall
    • Stud.IP
    • UB Katalog
    • Status GITZ-Dienste
    • Störungsmeldung GB3
    • IT Dienste
    • Informationsportal (Beschäftigte)
    • Beratungsnavi
    • Linksammlung
    • DE
    • Instagram
    • YouTube
    • LinkedIn
    • Mastodon
    • Bluesky
Menü
  • Struktur
  • Fakultäten
  • Fakultät Architektur, Bauingenieurwesen und Umweltwissenschaften
  • Institute
  • Institut für Tragwerksentwurf
  • Team
Logo Institut für Tragwerksentwurf der TU Braunschweig
Harald Kloft
  • Team
    • Harald Kloft
    • Norman Hack
    • Yamen Abou Abdallah
    • Cecilia S. Ahumada
    • Fatemeh Salehi Amiri
    • Meike Bährens
    • Abtin Baghdadi
    • Robin Dörrie
    • Hannes Eichler
    • Stefan Gantner
    • Joschua Gosslar
    • Sven Jonischkies
    • Noor Khader
    • Lukas Ledderose
    • Jeldrik Mainka
    • Samim Mehdizadeh
    • Muslima Rafikova
    • Bartłomiej Sawicki
    • Ali Salamatian
    • Benedict Sonntag
    • Julian Tesche
    • Diana Zavaleta
    • Jan-Phillip Zöllner
    • Ehemalige

Harald Kloft

Leitung

Harald Kloft

Univ.-Prof. Dr.-Ing. Bauingenieur

Institutsleitung

t: (0531) 391-3571

ite(at)tu-braunschweig.de


Akademische Ausbildung und Arbeit

Postgraduate professional career

  • Since 2020: Spokesperson of the Collaborative Research Center TRR 277 Additive Manufacturing in Construction 
  • Since 2017: Vice dean of faculty architecture, civil engineering and environmental sciences (Department of Architecture, Civil Engineering and Environmental Sciences) at TU Braunschweig
  • 2017-2019: Member of academic senate at TU Braunschweig
  • 2015-2017: Dean of Department of Architecture, Civil Engineering and Environmental Sciences at TU Braunschweig
  • Since 2011: Full professorship ‘Tragwerksentwurf’ and director of the Institute of Structural Design (ITE) at TU Braunschweig, Department of Architecture, Civil Engineering and Environmental Sciences
  • 2007-2009: Full professorship ‘Tragwerksentwurf’ at TU Graz, Faculty of Architecture
  • 2007-2008: Dean of doctoral studies at TU Graz, Faculty of Architecture
  • Since 2002: Founder and partner of the engineering practice office for structural design (osd), Frankfurt a. M.
  • 2002-2011: Full professor ‘Tragwerksentwurf und Konstruktionen’ at TU Kaiserslautern, Faculty A/RU/BI
  • 2003-2004: Program director of the architectural degree program at TU Kaiserslautern, Faculty A/RU/BI
  • 2000-2008: Visiting-professor ‘Structural Design’ at the Städelschule, Frankfurt a. M.
  • 1998-2001: Structural engineer at Bollinger + Grohmann, Frankfurt a. M.
  • 1995-1999: Lecturer for sustainable construction, TU Darmstadt, Faculty of Civil Engineering
  • 1995-1998: Research assistant, TU Darmstadt, Faculty of Civil Engineering, Institute of Structural Analysis, Prof. Dr.-Ing. J.-D. Wörner
  • 1993-1995: Research assistant, TU Darmstadt, Faculty of Architecture, Chair of Structural Engineering, Prof. Dr.-Ing. Walther Mann
  • 1991-1992: Project engineer, Strabag Bau AG, Köln/Darmstadt

Advanced academic qualifications

  • 1998: Doctorate, Civil Engineering, TU Darmstadt, Supervisor: Prof. Dr.-Ing. J.-D. Wörner

University training and degree

  • 1982-1990: Dipl.-Ing. in civil engineering, TU Darmstadt, Prof. Dr.-Ing. Gert König

Publikationen

2025

Kloft, Harald; Hack, Norman; Sawicki, Bartłomiej; Dörrie, Robin; Gosslar, Joschua; Jonischkies, Sven; Ledderose, Lukas; Zöllner, Jan-Phillip (2025): Digital Fabrication Strategies for Sustainability. In: Proceedings of the 4th International Conference on Sustainable Development in Civil, Urban and Transportation Engineering, Cham: Springer Nature Singapore (Lecture Notes in Civil Engineering, vol. 418), pp. 35–44.

2024

Baghdadi, A., Ledderose, L. and Kloft, H., 2024, November. Proposal and parametric investigations of square steel tubes as post-tensioned connectors for linear-shaped precast concrete elements. Structures, 69, p.107295. Available at: https://www.sciencedirect.com/science/article/pii/S2352012424014474

Baghdadi, A., Ledderose, L. and Kloft, H., 2024. Proposing new standard and ANFIS calculation approaches for precast concrete connections with steel tube elements: lessons from experimental studies. Buildings, 14(10), p.3298. Available at: https://www.mdpi.com/2075-5309/14/10/3298

Babovic, N., Laghi, V. and Kloft, H., 2023, July. Branching structure for reinforcement anchorage produced with wire and arc additive manufacturing technique. International Conference on 3D Construction Printing, pp.272–280. Cham: Springer Nature Switzerland. Available at: https://link.springer.com/chapter/10.1007/978-3-031-64269-2_33

Lowke, D., Anton, A., Buswell, R., Jenny, S.E., Flatt, R.J., Fritschi, E.L., Hack, N., Mai, I., Popescu, M. and Kloft, H., 2024. Digital fabrication with concrete beyond horizontal planar layers. Cement and Concrete Research, 186, p.107663. Available at: https://doi.org/10.1016/j.cemconres.2024.107663

Kloft, H., Sawicki, B., Bos, F., Dörrie, R., Freund, N., Gantner, S., Gebhard, L., Hack, N., Ivaniuk, E., Kruger, J. and Kaufmann, W., 2024. Interaction of reinforcement, process, and form in digital fabrication with concrete. Cement and Concrete Research, 186, p.107640. Available at: https://doi.org/10.1016/j.cemconres.2024.107640

Gebhard, L., Mata-Falcón, J., Ammann, R., Preßmair, N., Kromoser, B., Menna, C., Baghdadi, A., Kloft, H., Gabriel, M., Walch, M. and Kaufmann, W., 2024. Enhancing structural efficiency with digital concrete – principles, opportunities and case studies. Cement and Concrete Research, 185, p.107645. Available at: https://doi.org/10.1016/j.cemconres.2024.107645

Perrot, A., Jacquet, Y., Caron, J.F., Mesnil, R., Ducoulombier, N., De Bono, V., Sanjayan, J., Ramakrishnan, S., Kloft, H., Gosslar, J. and Muthukrishnan, S., 2024. Snapshot on 3D printing with alternative binders and materials: Earth, geopolymers, gypsum and low carbon concrete. Cement and Concrete Research, 185, p.107651. Available at: https://doi.org/10.1016/j.cemconres.2024.107651

Unglaub, J., Müggenburg, M., Jahns, H., Kloft, H., Hensel, J. and Thiele, K., 2024, September. Towards a digital twin to enable first-time-right DED-arc components. RILEM International Conference on Concrete and Digital Fabrication, pp.439–446. Cham: Springer Nature Switzerland. Available at: https://doi.org/10.1007/978-3-031-70031-6_51

Schneider, P., Dietrich, S., Richter, C., Asl, R.N., Straßer, A., Kränkel, T., Bletzinger, K.U., Gehlen, C., Kloft, H., D’Acunto, P. and Dörfler, K., 2024, September. Fabrication-aware design method and experimental assessment of a segmented concrete pedestrian bridge using SPI technology. RILEM International Conference on Concrete and Digital Fabrication, pp.362–369. Cham: Springer Nature Switzerland. Available at: https://doi.org/10.1007/978-3-031-70031-6_42

Gosslar, J., Dorresteijn, E., David, M., Leusmann, T., Dröder, K., Lowke, D. and Kloft, H., 2024, September. Digital fabrication with local earthen materials: the relevance of process robustness. RILEM International Conference on Concrete and Digital Fabrication, pp.415–422. Cham: Springer Nature Switzerland. Available at: https://link.springer.com/chapter/10.1007/978-3-031-70031-6_48

Baghdadi, A., Amiri, F., Jantzen, C., Hack, N. and Kloft, H., 2024. Integration of augmented reality for enhanced visualization and analysis in bridge engineering, towards real-time optimization in structural and architectural design. IASS 2024 Symposium Proceedings: Redefining the Art of Structural Design, August 26–30, Zurich, Switzerland. Available at: https://app.iass2024.org/files/IASS_2024_Paper_17.pdf

Baghdadi, A., Kloft, H. and Ledderose, L., 2024. Application of water jet cutting and optimization problems in the development of a new concrete construction system. IASS 2024 Symposium Proceedings: Redefining the Art of Structural Design, August 26–30, Zurich, Switzerland. Available at: https://app.iass2024.org/files/IASS_2024_Paper_1.pdf

Baghdadi, A., Kloft, H. and Ledderose, L., 2024. Form finding and analyzing of shells by polynomial equations and artificial neural network. IASS 2024 Symposium Proceedings: Redefining the Art of Structural Design, August 26–30, Zurich, Switzerland. Available at: https://app.iass2024.org/files/IASS_2024_Paper_3.pdf

Kloft, H., Salamatian, A., Gosslar, J., Dorresteijn, E. and Lowke, D., 2024, June. Robotic rammed earth-concrete (RREC): a novel additive manufacturing technology to strengthen rammed earth structures by integrated rammed concrete parts. International Conference on Earthen Construction, pp.60–70. Cham: Springer Nature Switzerland. Available at: https://link.springer.com/chapter/10.1007/978-3-031-62690-6_7

Lachmayer, L., Dittrich, L., Recker, T., Dörrie, R., Kloft, H. and Raatz, A., 2024. Inline image-based reinforcement detection for concrete additive manufacturing processes using a convolutional neural network. ISARC: Proceedings of the International Symposium on Automation and Robotics in Construction, 41, pp.42–48. Available at: https://doi.org/10.22260/ISARC2024/0007

Hitzegrad, J., Brohmann, L., Herding, F., Pfennings, K., Jonischkies, S., Scharnbeck, E., Mainka, J., Mai, I., Windt, C., Kloft, H. and Wehrmann, A., 2024. Surfaces of coastal biogenic structures: exploiting advanced digital design and fabrication strategies for the manufacturing of oyster reef and mussel bed surrogates. Frontiers in Marine Science, 11, p.1395025. Available at: https://doi.org/10.3389/fmars.2024.1395025

Fleckenstein, J., Knychalla, B., Briels, D., Baghdadi, A., Placzek, G., Herding, F., Schwerrdtner, P., Auer, T., Lowke, D., Kloft, H. and Dörfler, K., 2024. Functional hybridisation in concrete building envelope elements through additive manufacturing. Fabricate 2024, p.196. Available at: https://discovery.ucl.ac.uk/id/eprint/10187718/1/Fabricate-2024.pdf

Kloft, H., Baghdadi, A., Ledderose, L., Eschenbach, M.B., Tessmann, O., Kuhn, C. and Wagner, A.K., 2024. Towards a hybrid modular construction system reusing precast concrete components. Fabricate 2024, pp.106–113. Available at: https://doi.org/10.2307/jj.11374766.17

Gosslar, J. and Kloft, H., 2024. Robotischer Stampflehmbau. DETAIL, 4, p.14.

Schmitz, L.P., Gosslar, J., Dorresteijn, E., Lowke, D. and Kloft, H., 2024. Experimental investigations on the compaction energy for a robotic rammed earth process. Frontiers in Built Environment, 10, p.1363804. Available at: https://doi.org/10.3389/fbuil.2024.1363804

Laghi, V., Babovic, N., Benvenuti, E. and Kloft, H., 2024. Blended structural optimization of steel joints for wire-and-arc additive manufacturing. Engineering Structures, 300, p.117141. Available at: https://doi.org/10.1016/j.engstruct.2023.117141

Baghdadi, A., Ledderose, L. and Kloft, H., 2024. Possible geometries for precast concrete structures, through discussing new connections, robotic manufacturing and re-utilisation of the concrete elements. Buildings, 14(1), p.302. Available at: https://doi.org/10.3390/buildings14010302

2023

Kloft, H.; Baghdadi, A.; Babovic, N.: Fuzzy Logic, Neural Network, and Adaptive Neuro-Fuzzy Inference System in Delegation of Standard Concrete Beam Calculations. In: buildings Vol. 14(1):15, 2023, DOI:10.3390/buildings14010015

Dörrie, R.; Freund, N.; David, M.; Dröder, K.; Lowke, D.; Kloft, H.: In-Process Integration of Reinforcement for Construction Elements During Shotcrete 3D Printing. In: Visions and Strategies for Reinforcing Additively Manufactured Constructions 2023, Open Conference Proceedings 3, DOI:10.52825/ocp.v3i.224

Dörrie, R.; Freund, N.; David, M.; Dröder, K.; Lowke, D.; Kloft, H.: Enclosing Reinforcement Structures in Shotcrete 3D Printing: The Effect of Reinforcement Geometry and Accelerator Dosage on the Formation of the Bond Area. In: Visions and Strategies for Reinforcing Additively Manufactured Constructions 2023, Open Conference Proceedings 3, DOI:10.52825/ocp.v3i.227

Dörfler, K.; Hack, N.; Henke, K.; Kloft, H.:: AMC Collaborative Demonstrators: Validation of Integrated Research Methodologies through Collaborative AMC Prototyping. Braunschweig: Technische Universität Braunschweig. 2023 Online unter: https://nbn-resolving.org/urn:nbn:de:gbv:084-2023101608066. DOI 10.24355/dbbs.084-202310041154-0

Dörrie, R.; Freund, N.; Herrmann, E.; Baghdadi, A.; Mai, I.; Galli, F.; David, M.; Dröder, K.; Lowke, D.; Kloft, H.: Automated force-flow-oriented reinforcement integration for Shotcrete 3D Printing. In: Automation in Construction, 2023, Vol.155, 105075 https://doi.org/10.1016/j.autcon.2023.105075

Kloft, H.; Schmitz, L. P.; Babovic, N.: Serial Uniqueness: Strengthening Standard Steel Profiles with WAAM Technology. In: ce/papers, 2023, Vol.. 6, Issue 3-4, pp. 792-795 https://doi.org/10.1002/cepa.2677

Baghdadi, A.; Ledderose, L.; Ameri, S.; Kloft, H.: Experimental and numerical assessments of new concrete dry connections concerning potentials of robotic CNC manufacturing technique. In: Engineering Structures 280, 115605 2023 https://doi.org/10.1016/j.engstruct.2023.115605

H Kloft,H.;  Schmitz, LP.; Müller, C.; Laghi, V.; Babovic,N.; Baghdadi, A.: Experimental Application of Robotic Wire-and-Arc Additive Manufacturing Technique for Strengthening the I-Beam Profiles. In: buildings, 2023, 13, 366 https://doi.org/10.3390/buildings13020366

Baghdadi, A.; Heristchian, M.;  Ledderose, L.; Kloft, H.: Experimental and Numerical Assessments of New Concrete Dry Connections concerning Potentials of the Robotic Subtractive Manufacturing Technique. In: Buildings, 2023, 13 (1), 210 https://doi.org/10.3390/buildings13010210

2022

Dörfler, K.; Kloft, H.; Lowke, D.: The Challenge of Large Scale. Additive Manufacturing in Construction. In: german research,3/2022, 2022  ISSN 1522-2322
Full Text PDF

Dörfler, K.; Kloft, H.; Lowke, D.: Keine Angst for großen Maßstäben. Additive Fertigung im Bauwesen und ihre Möglichkeiten.In: forschung, 3-4/2022, 2022
Full Text PDF​​​​​​​

Baghdadi, A.; Babovic, N.; Kloft, H.: Adapting the environment of known optimization problems with the building plan to design optimal beam layouts and discuss the usable synergy. In: APCS 2022 conference, Innovation·Sustainability·Legacy, 2022

Baghdadi, A.; Heristchian, M.; Kloft, H.: Application of energy method to investigate the stability of selected structural shells and arches regarding the Threshold capacity. In: APCS 2022 conference, Innovation·Sustainability·Legacy, 2022

Baghdadi, A.: Ameri, S.; Kloft, H.: Sensitive load areas in steel truss arches regarding geometrical and material Nonlinearity. In: APCS 2022 conference, Innovation·Sustainability·Legacy, 2022

Baghdadi, A.; Doerrie, R.; Kloft, H.: Optimization of building floor beam layout by optimization algorithms regarding the concrete printing techniques. In: APCS 2022 conference, Innovation·Sustainability·Legacy, 2022

Müller, C.; Müller, J.; Kloft, H.; Hensel, J.: Design of Structural Steel Components According to Manufacturing Possibilities of the Robot-Guided DED-Arc Process. In: Buildings 12 (12), 2154 https://doi.org/10.3390/buildings12122154

Dörrie, R.; Laghi, V .; Arrè, L.; Kienbaum, G.; Babovic, N.; Hack, N.; Kloft, H.: Combined Additive Manufacturing Techniques for Adaptive Coastline Protection Structures. In: Buildings 12 (11), 1806 https://doi.org/10.3390/buildings12111806

Kloft, H.; Doerfler, K.; Baehrens, M.: Dielemans, G.; Diller, J.; Doerrie, R.; Gantner, S.; Hensel, J.;Keune, A.; Lowke, D.; Mai, I.; Mainka, J.; Placzek, G.; Bettina Saile, B.; Scharf-Wildenhain, R.; Schwerdtner, P.; Kock, S.; Siebert, D.; Talke, D.; Wenzler, D.: The research infrastructure of TRR 277 Additive Manufacturing in Construction. In: BAUTECHNIK 99 (10), 758-773

Vasilic, K.; Hack, N.; Kloft, H.; Lowke, D.; Mechtcherine, V.; Nerella, V.; Wangler, T.: Digitale Fertigung im Betonbau In: BetonKalender 2022: Nachhaltigkeit, Digitalisierung, Instandhaltung, 2022/2/23​​​​​​​ https://doi.org/10.1002/9783433610879.ch10

Eschenbach, M.: Wagner,  A.-K.; Ledderose, L.; Böhret, T.; Wohlfeld, D.; Gille-Sepehri, M.; Kuhn, C. ; Kloft, H.; Tessmann, O.: Matter as Met: Towards a Computational Workflow for Architectural Design with Reused Concrete Components. In: Towards Radical Regeneration – Design Modelling Symposium Berlin 2022 (C. Gengnagel, O. Baverel, G. Betti, M. Popescu, M. Ramsgaard Thomsen, J. Wurm (Ed.), Springer International Publishing, pp.442-455, doi: 10.1007/978-3-031-13249-0_35, 2022.

Jonischkies, S.; Mainka, J.; Kloft, H.; Kinzebach, W.; Hack, N: Non-Waste-Wax Formwork for customized precast concrete construction-Practical example of the digital manufacturing process for small series of large-format bollards. Non-Waste-Wax Formwork for customized precast concrete construction-Practical example of the digital manufacturing process for small series of large-format bollards. In: Beton‐und Stahlbetonbau 117 (7), 531-538, 2022 https://doi.org/10.1002/best.202200036

Dörrie, R.; Kloft. H.: Force Flow Compliant Robotic Path Planning Approach for Reinforced Concrete Elements Using SC3DP. In: Third RILEM International Conference on Concrete and Digital Fabrication: Digital Concrete 2022 https://link.springer.com/chapter/10.1007/978-3-031-06116-5_55

Xiao, Y.; Khader, N.; Vandenberg, A.; Lowke, D.; Kloft, H.; Hack, N.: Injection 3D Concrete Printing (I3DCP) Combined with Vector-Based 3D Graphic Statics In: Third RILEM International Conference on Concrete and Digital Fabrication: Digital Concrete 2022, 43-49 https://doi.org/10.1007/978-3-031-06116-5_7

Lachmayer, L.; Dörrie, R.; Kloft, H.; Raatz, A.: Process Control for Additive Manufacturing of Concrete Components. In: Third RILEM International Conference on Concrete and Digital Fabrication: Digital Concrete, 2022, 351-356 https://doi.org/10.1007/978-3-031-06116-5_52

Lowke, D.; Gehlen, C.; Kloft, H.; Freund, N.; Matthäus, C.: Bewehrungskonzepte beim 3D-Druck von Konstruktionsbeton. In: BfT International, 02.2021, S. 92.

Lanwer, J.-P.; Weigel, H.; Baghdadi, A.; Empelmann, M.; Kloft, H.: Jointing Principles in AMC—Part 1: Design and Preparation of Dry Joints. In: Applied Sciences, 2022, 12, 4138 https://doi.org/10.3390/app12094138

Vasilic, K.; Hack, N.; Kloft, H.; Lowke, D.; Mechtcherine, V.; Nerella, V.; Wangler, T.: Digitale Fertigung im Betonbau. In: BetonKalender 2022: Nachhaltigkeit, Digitalisierung, Instandhaltung, 2022, 691-724 https://doi.org/10.1002/9783433610879.ch10

Ledderose, L.; Baghdadi, A.; Kloft, H.: Magnetic Alignment of Microsteel Fibers as Strategy for Reinforcing UHPFRC. In: Open Conference Proceedings, 2022 https://doi.org/10.52825/ocp.v1i.79

Ledderose, L.; Lehmberg, S.; Wirth, F.; Kloft, H.; Budelmann, H.: Entwicklung neuartiger Verbindungen für komplexe Stab-, Flächen-und Raumtragelemente aus UHPFRC. In: SPP 1542: Leicht Bauen mit Beton: Grundlagen für das Bauen der Zukunft mit bionischen und mathematischen Entwurfsprinzipien, Raumtragelemente aus UHPFRC, 2022,  50-89 https://doi.org/10.25368/2022.324

Ledderose, L.; Kloft, H.: Magnetische Ausrichtung von Mikro-Stahldrahtfasern in UHPFRC. In: SPP 1542: Leicht Bauen mit Beton: Grundlagen für das Bauen der Zukunft mit bionischen und mathematischen Entwurfsprinzipien, 2022, 720-724 https://doi.org/10.25368/2022.355

Baron, S.; Mainka, J.; Hoffmeister, H. W.; Dröder, K.; Kloft, H.: Non-Waste-Wachsschalungen. In: SPP 1542: Leicht Bauen mit Beton: Grundlagen für das Bauen der Zukunft mit bionischen und mathematischen Entwurfsprinzipien, 2022, 171-195 https://doi.org/10.25368/2022.328

Buswell, R. A.; Bos, F. P.; Leal da Silva, W. R.; Hack, N.; Kloft, H.; Lowke, D.; Freund, N.; Fromm, A.; Dini, E.; Wangler, T.; Lloret-Fritschi, E.; Roel Schipper, R.; Mechtcherine, V.; Perrot, A.; Vasilic, K.; Roussel, N.: Digital fabrication with cement-based materials: process classification and case studies. In: Digital Fabrication with Cement-Based Materials: State-of-the-Art Report of the RILEM TC 276-DFC, 2022, 11-48, https://doi.org/10.1007/978-3-030-90535-4_2

Asprone, D.; Menna, C.; Bos, F.; Mata-Falcón, J.; Ferrara, L.; Auricchio, F.; Cadoni, E.; MCF Cunha, V.; Esposito, L.; Fromm, A.; Grünewald, S.; Kloft, H.; Mechtcherine, V.;  Nerella, V.; Schipper, R.: Structural design and testing of digitally manufactured concrete structures. In: Digital Fabrication with Cement-Based Materials: State-of-the-Art Report of the RILEM TC 276-DFC, 2022, 187-222, https://doi.org/10.1007/978-3-030-90535-4_6

Mähl, F.; Hartl, G.; Kloft, H.: Die Capricorn‐Brücke im Düsseldorfer Medienhafen. In: Stahlbau, 2022, 39-48, https://doi.org/10.1002/stab.202100080

Yinan Xiao, ⁎, Norman Hack, Harald Kloft, DIGITAL STRUCTURAL DESIGN AND SHOTCRETE 3D PRINTING STRATEGIES FOR LIGHTWEIGHT REINFORCED CONCRETE BEAM-GRID STRUCTURES, fib, 2022

2021

­Kloft, H.: The Unity of Material, Construction and Form is timeless. In: Beton-und Stahlbetonbau (12), 2021, 923-923

Lachmayer, Lukas; Dörrie, Robin; Kloft, Harald; Raatz, Annika: Automated shotcrete 3D printing - Printing interruption for extended component complexity. In: 38th International Symposium on Automation and Robotics in Construction (ISARC 2021) ISBN 978-952-69524-1-3, ISSN 2413-5844, https://doi.org/10.22260/ISARC2021/0098
Full Text PDF

Baghdadi, A.; Meshkini, A.; Kloft, H.: Parametric design of in-plane concrete dry joints by FE method and Fuzzy logic toward utilising additive manufacturing technique. In: Proceedings of the IASS Annual Symposium 2020/21 and the 7th International Conference on Spatial Structures Inspiring the Next Generation. 23 – 27 August, Guilford, UK, 2021.

Baghdadi, A.; Meshkini, A.; Kloft, H.: Inspiration of Interlocking Wooden Puzzles for Precast Concrete Construction Conceptual Design of Structures. Conference: Proceedings of the International fib Symposium on the Conceptual Design of Structures , Switzerland, September 2021 16-18 202, ISSN 2617-4820

Mai, I.; Brohmann, L.; Freund, N.; Gantner, S.; Kloft, H.; Lowke, D.; Hack, N.: Large Particle 3D Concrete Printing – A Green and Viable Solution. In: Materials, 14, 6125, 2021. DOI: https://doi.org/10.3390/ma14206125.

Lowke, D.;  Vandenberg, A.; Pierre, A.; Thomas, A.; Kloft, H.; Hack, N.: Injection 3D concrete printing in a carrier liquid - Underlying physics and applications to lightweight space frame structures. In: Cement and Concrete Composites, 2021, 104169, ISSN 0958-9465 https://doi.org/10.1016/j.cemconcomp.2021.104169

Mechtcherine, V.; Buswell, R.; Kloft, H.; Bos, F. P.; Hack, N.; Wolfs, R.; Sanjayane, J.; Nematollahi, B.; Ivaniuk, E.; Neef, T.: Integrating reinforcement in digital fabrication with concrete: A review and classification framework. In: Cement and Concrete Composites, 2021, 103964, ISSN 20210958-9465, https://doi.org/10.1016/j.cemconcomp.2021.103964

Baghdadi, A.; Heristchian, M.; Kloft, H.: Connections placement optimization approach toward new prefabricated building systems. In: Engineering Structures, 2021, 111648, https://doi.org/10.1016/j.engstruct.2020.111648

Baghdadi, Abtin; Kloft, Harald: Parametric design of in-plane concrete dry joints by FE method and Fuzzy logic toward utilising additive manufacturing technique. Conference: IASS Annual Symposium 2020/21 and the 7th International Conference on Spatial Structures, 2020/21

Baghdadi, Abtin; Meshkini, Annahita; Kloft, Harald: Inspiration of Interlocking Wooden Puzzles for Precast Concrete Construction. Conference: IASS Annual Symposium 2020/21 and the 7th International Conference on Spatial Structures, 2020/21

Baghdadi, Abtin; Dörrie, Robin; Kloft, Harald: New calculation approach for selecting and orienting the reinforcing material for robotic concrete manufacturing. Conference: IASS Annual Symposium 2020/21 and the 7th International Conference on Spatial Structure, 2020/21

Schweiker, M.; Endres,  E.; Gosslar, J.; Hack, N.; Hildebrand, L.; Creutz, M.; Klinge, A.; Kloft, H.; Knaack, U.; Mehnert, J.; Roswag-Klinge, E.: Ten questions concerning the potential of digital production and new technologies for contemporary earthen constructions. In: Building and Environment, 2021, 108240, ISSN 0360-1323 https://doi.org/10.1016/j.buildenv.2021.108240

Empelmann, M.; Kloft, H.: Practical solutions in additive manufacturing – Innovative jointing principles. In: BFT International 87, Issue 2, p. 93 (2021)

Bollinger, K.; Hauke, B.; Kloft, H.: Constantly rethinking-The Engineer and University Professor Stefan Polonyi (1930-2021) In: Bautechnik, 98, 2021, 388-393, 5

Bollinger, K.; Hauke, B.; Kloft, H.: Always thinking anew-The Engineer and University Teacher Stefan Polonyi (1930-2021) In: Stahlbau, 90, 2021 326-331, 5

Menges, A.; Sobek, W.; Kloft, H.; Curbach, M.; Mark, P.: Network of the Future. In: Bautechnik, 98, 2021, 193-193, 3

Kloft, H., Gehlen, C., Dörfler, K., Hack, N., Henke, K., Lowke, D., Mainka, J. and Raatz, A. (2021), TRR 277: Additive Fertigung im Bauwesen. In: Bautechnik, 98: 222-231. – DOI: https://doi.org/10.1002/bate.202000113

Henke, K.; Kloft, H.; Gehlen, C.; Dörfler, K.; Hack, N.; Lowke, D.; Mainka, J.; Raatz, A.: TRR 277: Additive manufacturing in construction. In: civil engineering design, 2021 https://mediatum.ub.tum.de/1647059

2020

Hack, N.; Kloft, H.: Shotcrete 3D Printing Technology for the Fabrication of Slender Fully Reinforced Freeform Concrete Elements with High Surface Quality: A Real-Scale Demonstrator. In: Bos F., Lucas S., Wolfs R., Salet T. (Hrsg.): Second RILEM International Conference on Concrete and Digital Fabrication. RILEM Bookseries, Vol 28. Springer, Berlin, 2020, S. 1128-1137 – DOI: 10.1007/978-3-030-49916-7_107

Buswell, R.; Kinnell, P.; Xu, J.; Hack, N.; Kloft, H.; Maboudi, M.; et al.: Inspection Methods for 3D Concrete Printing. In: Bos, F.; Lucas, S.; Wolfs, R.; Salet, T. (Hrsg.): Second RILEM International Conference on Concrete and Digital Fabrication. RILEM Bookseries, Vol 28. Springer, Berlin, 2020, S. 790-803 – DOI: 10.1007/978-3-030-49916-7_78

Hack, N.; Kloft, H.; Lowke, D.: Additive Fertigung Im Bauwesen: 3D-Betondruck Als eine Schlüsseltechnologie für die Digitalisierung der Bauwirtschaft. In: Ingenieurbaukunst 2020. Ernst & Sohn, Berlin, 2020, S.178-183 - 9783433032886

Baghdadi, A.; Heristchian, M.; Kloft, H.: Design of prefabricated wall-floor building systems using meta-heuristic optimization algorithms. In: Automation in Construction (2020) Vol. 114 - DOI: 10.1016/j.autcon.2020.103156

Baghdadi, A.; Heristchian, M.; Ledderose, L.; Kloft, H.: Experimental and numerical assessment of new precast concrete connections under bending loads. In: Engineering Structures (2020) Vol. 212 - DOI: 10.1016/j.engstruct.2020.110456

Hack, N.; Dressler, I.; Brohmann, L.; Gantner, S.; Lowke, D.; Kloft, H.: Injection 3D Concrete Printing (I3DCP): Basic Principles and Case Studies. In: Materials, Nr. 5 (2020) Vol. 13 - DOI: 10.3390/ma13051093

Kloft, H.; Empelmann, M.; Hack, N.; Herrmann, E.; Lowke, D.: Bewehrungsstrategien für den Beton‐3D‐Druck. In: Beton‐ und Stahlbetonbau, Nr. 8 (2020) Vol. 115, S. 607-616 – DOI: 10.1002/best.202000032

Kloft, H.; Empelmann, M.; Hack, N.; Herrmann, E.; Lowke, D.: Reinforcement strategies for 3D‐concrete‐printing. In: Civil Engineering Design, Nr. 4 (2020) Vol. 2, S. 131-139 – DOI: 10.1002/cend.202000022

Kloft, H.; Krauss, H.-W.; Hack, N.; Herrmann, E.; Neudecker, S.; Varady, P.; Lowke, D.: Influence of process parameters on the interlayer bond strength of concrete elements additive manufactured by Shotcrete 3D Printing (SC3DP). In: Cement and Concrete Research, Nr. 134 (2020) - DOI: 10.1016/j.cemconres.2020.106078.

Buswell, R.; Bos, F.; Schipper, R.; Lowke, D.; Hack, N.; Kloft, H.; Mechtcherine, V.; Wangler, T.; Roussel, N.: A process classification framework for defining and describing Digital Fabrication with Concrete In: Cement and Concrete Research, Nr. 134 (2020) - DOI: 10.1016/j.cemconres.2020.106068

Bollinger, K.; Kloft, H.: Univ.-Prof. em. Dr.-Ing. E.h. mult. Dr. h.c. Stefan Polónyi zum 90. Geburtstag In: Bautechnik, Nr. 8 (2020) Vol. 97, S. 591-594 - DOI: 10.1002/bate.202010110

2019

Hack, N.; Lindemann, H.; Kloft, H.: Adaptive Modular Spatial Structures for Shotcrete 3D Printing. Conference: Proceedings of the 24th International Conference on Computer-Aided Architectural Design Research in Asia. 15.-18.04.2019, Wellington, Neuseeland, 2019, S. 363-372

Ledderose, L.; Lehmber, S.; Budelmann, H.; Kloft, H.: Robotergestützte, magnetische Ausrichtung von Mikro‐Stahldrahtfasern in dünnwandigen UHPFRC‐Bauteilen. In: Beton- und Stahlbetonbau, Nr. 1 (2019) Vol. 114, S. 33-42 – © Ernst & Sohn Verlag für Architektur und technische Wissenschaften GmbH & Co. KG, Berlin – DOI: 10.1002/best.201800083
Full - text PDF​​​​​​​

Baghdadi, A.; Heristchian, M.; Kloft, H.: A Semi-Supervised Meta-Heuristic Shell Form-Finding Approach // Structural assessment of remodelled shells of Heinz Isler. In: International Journal of Advanced Structural Engineering. Nr. 11, (2019) S. 491–502 - DOI: 10.1007/s40091-019-00248-4

Baghdadi, A.; Müller, C.; Kloft, H.: Potentials of 3D Printing Technique in Optimum Design of Reinforced-Concrete Elements. Conference: Proceedings of the IASS Symposium “ FORM and FORCE ”. 7.-10.10.2019, Barcelona, 2019

Kloft, H.; Empelmann, M.; Oettel, V.; Ledderose, L.: Production of the first concrete and reinforced concrete columns by means of 3D printing with concrete. In: BFT International. Betonwerk + Fertigteil-Technik. Bd. 85, Nr. 6 (2019), S. 28-37

Kloft, H.; Hack, N.; Lindemann, H.; Mainka, J.: Shotcrete 3D Printing (SC3DP) – 3D-Drucken von großformatigen Betonbauteilen. In: Deutsche BauZeitschrift. (2019) Nr. 2, S. 54-57

Kloft, H.; Hack, N.; Lowke, D.: 3D-Drucken Mit Druck. In: Baumit ArchitekturSpezial. (2019) Nr.4, S. 26–29.

Kloft, H.; Hack, N.; Mainka, J.; Brohmann, L.; Herrmann, E.; Ledderose, L.; Lowke, D.: Additive Fertigung im Bauwesen. Erste 3‐D‐gedruckte und bewehrte Betonbauteile im Shotcrete‐3‐D‐Printing‐Verfahren (SC3DP). In: Bautechnik, Nr. 12 (2019) Vol. 96, S. 929-938 – © Ernst & Sohn Verlag für Architektur und technische Wissenschaften GmbH & Co. KG, Berlin - DOI: 10.1002/bate.201900094.
Full - text PDF

Kloft, H.; Hack, N.; Mainka, J.; Lowke, D.: Large scale 3D Concrete Printing. Basic principles of 3D concrete printing. In: ad-media GmbH (Hg.): CPT Worldwide, Bd. 1, Köln, 2019, S. 28–35, https://www.cpt-worldwide.com

Kloft, H.; Lowke, D.; Hack, N.: 3D printing. An Innovative And Efficient Technology For 3D Printing Of Large-Scale Concrete Components. In: drymix.info (Hg.): Drymix Mortar Yearbook 3D Special, München, 2019, S. 38–43

Kloft, H.; Lowke, D.; Hack, N.: Shotcrete 3D Printing - An innovative and efficient technology for 3D printing of large-scale concrete components. In: Drymix Mortar Yearbook 3D Special. 2019, S. 38-43.

Kloft, H.; Oechsler, J.; Loccarini, F.; Gosslar, J.; Delille, C.: Robotische Fabrikation von Bauteilen aus Stampflehm. In: Deutsche BauZeitschrift. (2019) Nr. 7/8, S. 54-59

Müller, J.; Grabowski, M.; Müller, C.; Hensel, J.; Unglaub, J.; Thiele, K.; Kloft, H.; Dilger, K.: Design and Parameter Identification of Wire and Arc Additively Manufactured (WAAM) Steel Bars for Use in Construction. In: Metals - Open Access Metallurgy. Nr. 9 (2019) Vol. 725 – DOI: 10.3390/met9070725

Fagone, M.; Kloft, H.; Loccarini; F.; Ranocchiai, G.: Jute fabric as a reinforcement for rammed earth structures. In: Composites Part B Engineering. (2019) Nr. 175 – DOI: 10.1016/j.compositesb.2019.107064

Krauss, H.-W.; Budelmann, H.; Kloft, H:; Lowke, D.; Nolte, N.: Additive Fertigung mit Beton-Herausforderungen und Lösungswege am Beispiel des SC3DP-Verfahrens. Conference: 20. ibausil - 20th International Conference on Building Materials 12.-14.09.2018, Weimar, 2019

Lindemann, H.; Ibrahim, S.; Dietrich, F.; Herrmann, E.; Raatz, A.; Kloft, H.; Gerbers, R.; Dröder, K.: Development of a Shotcrete 3D-Printing (SC3DP) Technology for Additive Manufacturing of Reinforced Freeform Concrete Structures. In: Wangler, T.; Flatt, R. (Hrsg.): First RILEM International Conference on Concrete and Digital Fabrication – Digital Concrete 2018. RILEM Bookseries, Springer, Berlin, 2019, S. 287-298 – DOI: 10.1007/978-3-319-99519-9_27

2018

Fäth, K.; Kloft, H.; Mähl, F.; Scheuermann, A.: Das Tragwerk als integraler Bestandteil des Energiekonzeptes - die ETA-Fabrik der TU Darmstadt. In: Ingenieurbaukunst 2018. Ernst & Sohn, Berlin, 2018, S.122-129 – 9783433032046

Lindemann, H.; Kloft, H.; Hack, N.: Gradual Transition Shotcrete 3D Printing. Conference: Advances in Architectural Geometry 2018. 22.-25.09.2018, Chalmers University of Technology, Gothenburg, 2018

Lindemann, H.; Gerbers, R.; Ibrahim, S.;  Dietrich, F.; Herrmann, E.; Dröder, K.; Raatz, A.; Kloft, H.: Development of a Shotcrete 3D-Printing (SC3DP) Technology for Additive Manufacturing of Reinforced Freeform Concrete Structures. In: First RILEM International Conference on Concrete and Digital Fabrication – Digital Concrete 2018, T. Wrangler, R. J. Flatt (Ed.), Springer International Publishing, pp.287-298, ISBN: 978-3-319-99518-2, 2018.

Herrmann, E.; Mainka, J.; Lindemann, H.; Wirth, F.: Digitally Fabricated Innovative Concrete Structures. Conference: 35th International Symposium on Automation and Robotics in Construction. 20.-25.07.2018, Berlin, 2018

Ibrahim, S.; Olbrich, A.; Lindemann, H.; Gerbers, R.; Kloft, H.; Dröder, K.; Raatz, A.: Automated Additive Manufacturing of Concrete Structures without Formwork - Concept for Path Planning. In: Schüppstuhl, T.; Tracht, K.; Franke, J (Hrsg.): Tagungsband des 3. Kongresses Montage Handhabung Industrieroboter. Springer, Berlin, 2018, S. 83-91 - 9783662567135

Kloft, H.; Herrmann, E.; Ledderose, L.; Lindemann, H.; Mainka, J.; Wirth, F.: Digital fabrication as chance for a “New Standard” in concrete design. Conference: 1st International Conference on Concrete. 10.-12.9.2018, Zürich, 2018, S.127-129

Mainka, J.; Wirth, F.; Herrmann, E.; Kloft, H:Industrializing the Non-Waste-Wax-Formwork Technology. Conference: 1st International Conference on Concrete. 10.-12.9.2018, Zürich, 2018, S.127-129, S. 153-154

Ledderose, L.; Kloft, H.: Snap-fits made of reinforced concrete:  From advanced manufacturing to novel applications. Conference: Proceedings of the IASS Symposium “Creativity in Structural Design”. 16.-20.7.2018, Boston, 2018

Wirth, F.; Mainka, J.; Kloft, H.: Modular and fully automated production process for free-form concrete moulds on the basis of technical waxes. In: CPI Worldwide, Nr. 10 (2018) S.152-158

Baghdadi, A.; Heristchian, M.; Kloft, H.: A Semi-Supervised Meta-Heuristic Shell Form-Finding Approach // Structural assessment of remodelled shells of Heinz Isler. In: Iranian Journal of Science and Technology, Transactions of Civil Engineering. Nr. 11 (4), (2018) S. 491–502 - DOI: 10.1007/s40091-019-00248-4

Hermann, E.; Lindemann, H.; Kloft, H.: Entwicklung einer robotergestützten Spritzbetontechnologie zur schalungslosen generativen Fertigung komplexer Betonbauteile am DBFL (Digital Building Fabrication Laboratory). In: Kusterle, W. (Hrsg.): Spritzbeton-Tagung 2018, Bd. 12, 11.-12.1.2018, Eigenverlag, Alpbach

 

2017

Fäth, K.; Kloft, H.; Scheuermann, A.: Vorbildliche integrale Planung - Die +e Kita in Marburg. In: Ingenieurbaukunst 2017. Ernst & Sohn, Berlin, 2017, S.150-155 – 9783433031674

Ledderose, L.; Lehmberg, S.; Wirth, F.; Budelmann, H.; Kloft, H.: From digital design to precise production: Dry-jointed coffered ceiling made of UHPFRC-components. Conference: Proceedings of the IASS Symposium. 25.-28.9.2017, Hamburg, 2017, S. 124

Mainka, J.; Kloft, H.; Stein, E.; Wirth, F.: Non-Waste Wax Formwork-Technology: Innovative Precision Formwork for Concrete Members Made of Recyclable Industrial Waxes. Conference: Proceedings of the IASS Symposium. 25.-28.9.2017, Hamburg, 2017, S. 10

Mainka, J.; Wirth, F.; Hermann, E.; Kloft, H.: Industrializing the Non-Waste-Wax-Formwork technology. Conference: 1st International Conference on Concrete and Digital Fabrication. 10.-12.9.2017, 2017, S. 153-154

Lindemann, H.; Fromm, A.; Ott, J.; Kloft, H.: Digital Prefabrication of freeform concrete elements using shotcrete technology. Conference: Proceedings of the IASS Symposium. 25.-28.9.2017, Hamburg, 2017

Lindemann, H.; Neudecker, S.; Kloft, H.; Petri, J.: Process Chain for the Robotic Controlled Production of Non-Standard, Double-Curved, Fibre-Reinforced Concrete Panels with an Adaptive Mould. In: Fabricate 2017, 2017, S.218-223 -  DOI: 10.2307/j.ctt1n7qkg7.34

2016

Lehmberg, S.; Ledderose, L.; Wirth, F.; Budelmann, H.; Kloft, H.: Von der Bauteilfügung zu leichten Tragwerken: Trocken gefügte Flächenelemente aus UHPFRC. In: Beton- und Stahlbetonbau, Nr. 12 (2016) Vol. 111, S. 806-815 – © Ernst & Sohn Verlag für Architektur und technische Wissenschaften GmbH & Co. KG, Berlin – DOI: 10.1002/best.201600053
Full - text PDF

Mainka, J.; Kloft, H.; Baron, S.; Hoffmeister, H.-W.; Dröder, K.: Non‐Waste‐Wachsschalungen: Neuartige Präzisionsschalungen aus recycelbaren Industriewachsen. In: Beton- und Stahlbetonbau, Nr. 12 (2016) Vol. 111, S. 784-793  – © Ernst & Sohn Verlag für Architektur und technische Wissenschaften GmbH & Co. KG, Berlin – DOI: 10.1002/best.201600055
Full - text PDF

Mainka, J.; Kloft, H.; Ledderose, L.; Neudecker, S.; Petri, J.: Hochleistungswerkstoff. Bauen mit Beton im Zeitalter digitaler Planung und Fertigung. In: Deutsche Bauzeitschrift, Nr. 2 (2016) Nr. 64, S. 60-64

Neudecker, S.; Gerbers, R.; Heyn, J.; Dietrich, F.; Raatz, A.; Kloft, H.; Bruns, C.; Dröder, K.: A New Robotic Spray Technology for Generative Manufacturing of Complex Concrete Structures Without Formwork. In: Procedia CIRP – DOI: 10.1016/j.procir.2016.02.107

2015

Kloft, H.: Integrale Tragwerksplanung im Kontext digitaler Prozessketten. In: Deutsche BauZeitschrift. (2015) Nr. 8

Mähl, F.; Kloft, H.: Integrale Fassadenplanung. In: Stahlbau – Glasbau 2015, Nr. 84 (2015), S. 31-42 - DOI: 10.1002/stab.201590088 – 9783433031018

Müller, C..; Kloft, H.: Parameterbestimmung mit dem Anderson-Darling Test bei Versuchen an Glas. In: Stahlbau – Glasbau 2015, Nr. 84 (2015), S. 31-42 - DOI: 10.1002/stab.201590081 - 9783433031018

Ledderose, L.; Kloft, H.: Robot-aided rearrangement of steel fibres in UHPFRC via magnetic forces. Conference: Future Visions – Proceedings of the IASS Symposium 2015 & ISOFF Symposium, 17.- 20.8. & 16.- 17.8.2015, Amsterdam, 2015, paper No. IASS2015-517423, S. 12 – ISBN: 9789053630426

Lehmberg, S.; Ledderose, L.; Wirth, F.; Budelmann, H.; Kloft, H.: From Jointing Systems to Light-Weight Structures: Hybrid, dry-fit beam, surface and spatial structures made of UHPFRC. Conference: Future Visions – Proceedings of the IASS Symposium 2015 & ISOFF Symposium, 17.- 20.8. & 16.- 17.8.2015, Amsterdam, 2015, paper No. IASS2015-517423, S. 12 – ISBN: 97890536304266

Mainka, J.; Kloft, H.; Stein, E.: A Novel Precise Formwork Technology Based on CNC Milled Recyclable Industrial Wax for the Casting of Geometrically Complex Concrete Elements. Conference: Future Visions – Proceedings of the IASS Symposium 2015 & ISOFF Symposium, 17.- 20.8. & 16.- 17.8.2015, Amsterdam, 2015, paper No. IASS2015-517423, S. 12 – ISBN: 9789053630426

2014

Heuchel, C.; Wiswedel, S.; Fäth, K.; Kloft, H.; Mähl, F.: Das Landesarchiv NRW - Der größte Archivbau Europas in Duisburg. In: Bauingenieure Jahresausgabe 2013/2014. Springer Verlag, Düsseldorf, 2014

Kloft, H.; Hoyer, S.: Zum Entwerfen von Tragwerken. In: Stahlbau, Nr. 11 (2014) Vol. 83, S. 806-814 – © Ernst & Sohn Verlag für Architektur und technische Wissenschaften GmbH & Co. KG, Berlin – DOI: 10.1002/stab.201410216
Full - text PDF​​​​​​​

Ledderose, L.; Kloft, H.: Preliminary Investigations for Magnetic rearrangement of Steel Fibers in UHPFRC. Conference: Proceedings of the IASS Symposium „Shells, Membranes and Spatial Structures: Footprints.“, 15.-19.9.2014, Brasil, 2014

Lehmberg, S.; Ledderose, L.; Mainka, J.; Budelmann, H.; Kloft, H.: Non-Standard Joints for lightweight modular Spatial and Shell Structures made from UHPFRC. Conference: Proceedings of the IASS Symposium „Shells, Membranes and Spatial Structures: Footprints.“, 15.-19.9.2014, Brasil, 2014

Mainka, J.; Kloft, H.; Heinemann, T.: A novel recyclable wax formwork-system for high-precision free-form UHPC members and joints. Conference: Proceedings of the IASS Symposium „Shells, Membranes and Spatial Structures: Footprints.“, 15.-19.9.2014, Brasil, 2014

Kloft, H.; Mainka, J.; Stein, E.: A novel precise formwork-technology based on CNC milled recyclable industrial wax for the casting of geometrically complex concrete elements. Conference: Proceedings of the IASS Symposium „Shells, Membranes and Spatial Structures: Footprints.“, 15.-19.9.2014, Brasil, 2014.

Ledderose, L.; Kloft, H.: Robot-Aided Rearrangement of Steel Fibres in UHPFRC by Magnetic Forces. Conference: Proceedings of the IASS Symposium „Shells, Membranes and Spatial Structures: Footprints.“, 15.-19.9.2014, Brasil, 2014

Lehmberg, S.; Ledderose, L.; Wirth, F.; Kloft, H.; Budelmann, H.: From Jointing Systems to Light-Weight Structures: Hybrid, dry-fit beam, surface and spatial structures made of UHPFRC. Conference: Proceedings of the IASS Symposium „Shells, Membranes and Spatial Structures: Footprints.“, 15.-19.9.2014, Brasil, 2014

Lehmberg, S.; Mainka, J.; Ledderose, L.; Budelmann, H.; Kloft, H.: Neuartige Verbindungen für geometrisch komplexe Flächen und Stabwerkelemente aus UHPFRC. In: Scheerer, S.; Curbach, M. (Hrsg.): Leicht Bauen mit Beton – Forschung im Schwerpunktprogramm 1542 Förderphase 1. TU Dresden, Institut für Massivbau, 2014, S. 122-139

Kloft, H.: Retrospective and Lookout on the Professional Image of Construction Engineer: An Interview with Joerg Schlaich from the Year 1999‐ Beton- und Stahlbetonbau, Nr. 11 (2014) Vol. 109, S. 839-850 – © Ernst & Sohn Verlag für Architektur und technische Wissenschaften GmbH & Co. KG, Berlin – DOI: 10.1002/best.201400092
Full - text PDF

2013

Mainka, J.; Lehmberg, S.; Budelmann, H.; Kloft, H.: Non‐Standard Fügeprinzipien für leichte Bauteile aus UHPFRC. In: Beton- und Stahlbetonbau, Nr. 11 (2013) Vol. 108, S. 763-773 – © Ernst & Sohn Verlag für Architektur und technische Wissenschaften GmbH & Co. KG, Berlin – DOI: 10.1002/best.201300055
Full - text PDF

2012

Neudecker, S.; Kloft, H.: Adaptable Structures by mono-modular, ruled surface nods. Conference: Proceedings of the IASS Symposium „From Spatial Structures to Space Structures“. Seoul, Mai 2012, S. 1458-1463

Otto, K.; Kloft, H.; Mähl, F.; Sastré, H.: Multifunktionale, sphärisch gebogene Oberlichtverglasung für das Städel Museum. In: Stahlbau S1 (2012) Vol. 81, S. 12-27 – © Ernst & Sohn Verlag für Architektur und technische Wissenschaften GmbH & Co. KG, Berlin – DOI: 10.1002/stab.201290056
Full - text PDF

Pape, T.; Brückner, F.; Kloft, H.; Schierwater, T.; Rühmann, L.: “Überragende” Sicht. In: Bautechnik, Nr. 10 (2012) Vol. 89, S. 669-678 – © Ernst & Sohn Verlag für Architektur und technische Wissenschaften GmbH & Co. KG, Berlin – DOI: 10.1002/bate.201200041
Full - text PDF

2011

Kloft, H.: Digital Manufacturing and Sustainability. In: Agkathidis, A. (Hrsg.): Digital Manufacturing: In Design and Architecture. BIS Publishers, Amsterdam, 2011 – 9789063692322

Kloft, H.: Logic and Form: From Shells to Nonstandard Structures. Conference: 35th Annual Symposium of IABSE / 52nd Annual Symposium of IASS / 6th International Conference on Space Structures. September, London, 2011, S. 191-199

Kloft, H.: Logik oder Form. In: adato – architecture, Nr. 1 (2011) Hermann & Valentiny et Associés

Kloft, H., Fäth, K.: Der Murturm – ein räumlich erfahrbares Turmbauwerk. In: VBI – Beratende Ingenieure, Nr. 7/8 (2011), S. 22-25.

Kloft, H.; Fäth, K.; Wilhelm, V.: Entwerfen von leichten Dachtragwerken aus Glas und Stahl. In: Stahlbau, S1 (2011) Vol. 80, S. 7-12 – © Ernst & Sohn Verlag für Architektur und technische Wissenschaften GmbH & Co. KG, Berlin – DOI: 10.1002/stab.201120002
Full - text PDF

2010

Kloft, H.: Logic or Form. In: Graz Architecture Magazine GAM, Nr. 6 (2010), S. 108-119 – DOI: doi.org/10.1007/978-3-211-99210-4_8

Kloft, H.: Engineering of freeform architecture. In: Corser, R. (Hrsg.): Fabricating architecture: selected readings in digital design and manufacturing. Princeton Architectural Press, New York, 2010 – 9781568988894

Kloft, H.: Aspekte nachhaltigen Bauens - Ressource Bauwerk. In: Deutsche BauZeitung , Nr. 4 (2010)

2009

Kloft, H.: Pier Luigi Nervi: Von den ersten Patenten bis zur Ausstellungshalle in Turin 1917 – 1948. In: Deutsche BauZeitung, Nr. 6 (2009)

2008

Kloft, H.; Mähl, F.: Ressource Hochhaus. In: greenBUILDING, Nr. 2 (2008)

2007

Kloft, H.; Kling, S.; Mähl, F.; Scholte-Wassink, J.; Schroth, M.: Anschaulich: Tragwerkslehre experimentell 2002 - 2007. Eigenverlag TU Kaiserslautern, Kaiserslautern, 2007 – 9783939432500

Mähl, F.; Kloft, H.: Transluzent Sandwich Panels with Polymere Core: Structural Potential for New Architectural Applications. Conference: Proceedings of CDS07. 4th International Conference on the Conceptual Approach to Structural Design. 27.-29.7.2007, Venedig, 2007

Schroth, M.; Kloft, H.: Generative Design for Geometrical Stiffness of Folding Structures. Conference: Proceedings of CDS07. 4th International Conference on the Conceptual Approach to Structural Design. 27.-29.7.2007, Venedig, 2007

2006

Kloft, H.: Engineering Form. In: Chaszar, A. (Hrsg.): Blurring the Lines: Computer-Aided Design and Manufacturing in Contemporary Architecture. Academy Press, 2006 – 9780470868492

Kloft, H.: Structural Design of Contemporary Free-Form-Architecture. Conference: Proceedings of the IASS Symposium. 16.-19.10.2017, Peking, 2006, S. 10

Kloft, H.: Structural Design of Form. In: Oosterhuis, K.; Feireiss, L.; Themans, M. (Hrsg.): Game Set And Match II. On Computer Games, Advanced Geometries, and Digital Technologies. Episode Publishers, Rotterdam, 2006 - 978-9059730366

Kloft, H.: The Logic of Form?. Conference: Proceedings of International Colloquium of Free Form Design. Delft, 2006

Kloft, H.: Tragwerk, Material, Form. Conference: 5. Interdisziplinären Symposium Reichweiten/Leichte Konstruktion. Univerität Duisburg-Essen, 2006

2005

Kloft, H.: Non-Standard Structural Design for Non-Standard Architecture. In: Kolarevic, B.; Malkawi, A.(Hrsg.): Performative Architecture: Beyond Instrumentality. Routledge & CRC Press, London, 2005, Seiten – 9780415700832

Kloft, H.: Tragwerksplanung gekrümmter Formen, Engineering Curved Shapes. In: Arnold, T.; Grundei, P. (Hrsg.): Architektur Rausch : eine Position zum Entwerfen. Jovis, Berlin, 2005, S. 232-244 - 9783936314458

2003

Grohmann, M.; Kloft, H.: Load-bearing Structures of High Rise Buildings. In: Eisele, J. (Hrsg.): High-Rise Manual: Typology and Design, Construction and Technology. Birkhäuser, Basel, 2003 – 9783764302740

Kloft, H.: Engineering of Freeform Architecture. In: New Technologies in Architecture, Design and Technology Report. Harvard Design School, Cambridge, 2003

2002

Grohmann, M.; Kloft, H.: Tragwerke von Hochhausbauten. In: Eisele, J.; Kloft, E. (Hrsg.): Hochhausatlas. Callwey, München, 2002, S.96 – 9783766715241

Bollinger, K.; Heidlindemann, B.; Kloft, H.; Michel, M.; Stracke, M.: Freie Formen in tragfähige Gebäude verwandeln – Tragwerksplanung im digitalen Workflow. In: Brauer, G. (Hrsg.): Dynaform + cube : Architektur als Markenkommunikation. Birkhäuser, Basel, 2002, S. 77-90 – 9783764366568

Kloft, H.: Structural Engineering in Digital Workflow. In: Byggekunst 2002 - The Norwegian Review of Architecture, Nr. 7 (2002)

2001

Kloft, H.: Tragwerksplanung im digitalen Workflow. In: Schmal, P. (Hrsg.): Digital | real: Blobmeister, erste gebaute Projekte. Birkhäuser, Basel, 2001 - 9783764365721

2000

Wörner, J.-D.; Moerland, P.; Giebenhain, S.; Kloft, H.; Leiblein, K.: Zulässige Toleranzen für die Abweichungen der mechanischen Kennwerte von Beton mit rezykliertem Zuschlag. In: Deutscher Ausschuss für Stahlbeton. Nr. 508, Beuth Verlag, Berlin, 2000

1999

Kloft, H.: Baustoffkreislauf mit Lücken - Zur Optimierung des Material- und Energieeinsatzes in Wohngebäuden. In: Deutsche Bauzeitung. Nr. 133 (1999) Nr. 2, S. 107-116
Full - text PDF​​​​​​​

Kloft, H.; Gunnarsson, S.; Siegele, K.: Rückblick und Ausschau – Acht Interviews mit namhaften Ingenieuren. In: Deutsche Bauzeitung. Nr. 133 (1999) Nr. 12, S. 91 - 114
Full - text PDF

Kloft, H.; Wörner, J.-D.: Investigations of Mass and Energy Flow in the Existing Building Stock. Conference: 8th international Conference on Durability of Buildin Materials and Components. Vancouver, 1999

Seegräber, G.; Schneider, J.; Kloft, H.; Beier, T.: Interdisciplinary Teaching of Architecture and Civil Engineering at Darmstadt University of Technology. Conference: International EAAE Conference at University of Plymouth. Plymouth, 1999

Wörner, J.-D.; Moerland, P.; Kloft, H.; Leiblein, K.; Giebenhain, S.: Streuung der Materialkennwerte von Recycling-Beton. In: Abschluss Bericht des BMBF-Forschungsvorhabens Baustoffkreislauf im Massivbau (BiM). Eigenverlag TU Darmstadt, Darmstadt, 1999

1998

Kloft, H.: Kreislaufgerechtes Bauen. In: Der Architekt – Zeitschrift des BDA, Nr. 8, S. 469 - 475 (1998), Ernst & Sohn
Full - text PDF​​​​​​​

Kloft, H.: Material- und Energieinhalte von Gebäuden. In: Bericht Nr. 12 des Instituts für Statik TU Darmstadt, TU Darmstadt, 1998

Kloft, H.: Primärer Energieverbrauch und Baumaterialien. In: fórum architektury & stavitelství, Prag, 1998

Kloft, H.; Wörner, J.-D.: Investigations of Energy and Mass Capacity in Existing Buildings. Conference: 2nd European Conference 1998 Rebuild the European Cities of Tomorrow. 1.-3.4.1998, Florenz, 1998

Kloft, H.; Wörner, J.-D.: Investigations of Energy and Mass Flow in the Life Cycle of Buildings. Conference: Veröffentlichung der German Group of FIP (Deutscher Beton-Verein) zum XIIIth FIP Congress. Amsterdam, 1998

Kloft, H.; Wörner, J.-D.: Investigations of Mass and Energy Flow in the Existing Building Stock. Conference: CIB World Building Congress. Gävle, 1998

Kloft, H.; Wörner, J.-D.: Investigations of Mass and Energy Flow in the Existing Building Stock. Conference: Congress Report IABSE-Colloquium Saving Buildings in Central and Eastern Europe. Berlin, 1998

1997

Giebenhain, S.; Kloft, H.: Wenn der Berg ruft - Bauwerke für den Lawinenschutz. In: Deutsche Bauzeitung db. (1997) Nr. 10, S. 94 - 98
Full - text PDF

Kloft, H.: Baustoffliche Bewertung von Gebäuden. In: Darmstädter Massivbau-Seminar "Kreislaufgerechtes Bauen im Massivbau". Band 18 (1997) TU Darmstadt

Kloft, H.: Umweltgerechtes Bauen und kostengünstiges Bauen – ein Widerspruch?. In: Darmstädter Massivbau-Seminar " Kostengünstiges Bauen im Massivbau : Entwicklungen und Perspektiven". Band 17 (1997) TU Darmstadt

Kloft, H.: Kreislaufgerechtes Bauen – Zusammenhänge, Auswirkungen und Perspektiven im Mauerwerksbau. In: Das Mauerwerk, Nr. 2 (1997), S. 96-103

1996

Kloft, H.; Wörner, J.-D.; Liebermann, A. von: An Investigation of the Use of Building Materials in Residential Premises constructed at Different Times. Conference: 15th IABSE Congress. 16.-20.6.1996, Kopenhagen, 1996, S. 481-486

Kloft, H.; Wörner, J.-D.: Untersuchungen zum Baustoffeinsatz und zum konstruktiven Aufbau von Wohngebäuden verschiedenen Baualters. Conference: International Symposium of CIB W67. Wien, 1996

Bildnachweise dieser Seite

Für alle

Stellen der TU Braunschweig
Jobbörse des Career Service
Merchandising
Sponsoring- & Spendenleistungen
Drittmittelgeförderte Forschungsprojekte
Vertrauenspersonen für Hinweisgeber

Für Studierende

Semestertermine
Lehrveranstaltungen
Studiengänge von A-Z
Informationen für Erstsemester
TUCard

Interne Tools

Status GITZ-Dienste
Handbuch für TYPO3 (Intern)
Corporate Design-Toolbox (Intern)
Glossar (DE-EN)
Meine Daten ändern
Hochschulöffentliche Bekanntmachungen

Kontakt

Technische Universität Braunschweig
Universitätsplatz 2
38106 Braunschweig
Postfach: 38092 Braunschweig
Telefon: +49 (0) 531 391-0

Anreise

© Technische Universität Braunschweig
Impressum Datenschutz Barrierefreiheit

Zur anonymisierten Reichweitenmessung nutzt die TU Braunschweig die Software Matomo. Die Daten dienen dazu, das Webangebot zu optimieren.
Weitere Informationen finden Sie in unserer Datenschutzerklärung.