Institutsleitung |
Prof. Dr.-Ing. Laura De Lorenzis |
![]() |
|
Institut für Angewandte Mechanik | ||
Pockelsstraße 3 | ||
38106 Braunschweig | ||
Telefon | +49 531.391 - 94350 | |
Fax | +49 531.391 - 94399 | |
Raumnummer | 0315 / 0316 - 3. Etage | |
l.delorenzis(AT)tu-braunschweig.de |
Kruse R., Nguyen-Thanh N., Wriggers, P., De Lorenzis L. (2018, accepted), Isogeometric frictionless contact analysis with the third medium method, Computational Mechanics,
DOI: https://doi.org/10.1007/s00466-018-1547-z
Alessi R., Vidoli S., De Lorenzis L. (accepted), Variational approach to fatigue phenomena with a phase-field model: the one-dimensional case, Engineering Fracture Mechanics,
Fahrendorf F., De Lorenzis L., Gomez H. (2018), Reduced integration at superconvergent points in isogeometric analysis,Computer Methods in Applied Mechanics and Engineering,328: 390-410.
DOI: https://doi.org/10.1016/j.cma.2017.08.028
Hennig P, Ambati M, De Lorenzis L, Kästner M (2017), Projection and Transfer Operators in Adaptive Isogeometric Analysis with Hierarchical B-Splines, Computer Methods in Applied Mechanics and Engineering,
DOI: https://doi.org/10.1016/j.cma.2018.01.017
Kiendl J., Marino E., De Lorenzis L.(2017), Isogeometric collocation for the Reissner-Mindlin shell problem,Computer Methods in Applied Mechanics and Engineering,325: 645-665.
DOI: https://doi.org/10.1016/j.cma.2017.07.023
Alessi R., Ambati M., Gerasimov T., Vidoli S., De Lorenzis L. (2017), Comparison of Phase-Field Models of Fracture Coupled with Plasticity, Chapter in book: Advances in Computational Plasticity,
DOI: https://doi.org/10.1007/978-3-319-60885-3_1
Cajuhi, T., Sanavia, L. De Lorenzis, L. (2017), Phase-field modeling of fracture in variably saturated porous media. Computational Mechanics.
DOI: https://doi.org/10.1007/s00466-017-1459-3
T. Wu, A. Carpiuc-Prisacari, M. Poncelet, L. De Lorenzis (2017), Phase-field simulation of interactive mixed-mode fracture tests on cement mortar with full-field displacement boundary conditions, Engineering Fracture Mechanics, 182: 658-688, 2017.
DOI: https://doi.org/10.1016/j.engfracmech.2017.06.014
Dimitri R., Cornetti P., Mantic V., Trullo M., De Lorenzis L.(2017), Mode-I debonding of a double cantilever beam: a comparison between cohesive crack modeling and finite fracture mechanics,International Journal of Solids and Structures, 124: 57-72.
DOI: https://doi.org/10.1016/j.ijsolstr.2017.06.007
Carrara P., De Lorenzis L. (2017), Consistent identification of the interfacial transition zone in simulated cement microstructures, Cement and Concrete Composites,80: 224-234.
DOI: https://doi.org/10.1016/j.cemconcomp.2017.03.008
Weeger O., Narayanan B., De Lorenzis L., Kiendl J., Dunn M.L. (2017), An isogeometric collocation method for frictionless contact of Cosserat rods, Computer Methods in Applied Mechanics and Engineering, 321: 361-382.
DOI: https://doi.org/10.1016/j.cma.2017.04.014
Carrara P., De Lorenzis L. (2017), Chloride diffusivity of interfacial transition zone and bulk paste in concrete from microscale analysis, Modeling and Simulation in Materials Science and Engineering,25(4).
DOI: https://doi.org/10.1088/0965-0393/24/6/065009
V. Rheinheimer, Y. P. Wu, T. Wu, K. Celik, J. Y. Wang, L. De Lorenzis, P. Wriggers, M.H. Zhang, P. J.M. Monteiro (2017), Multi-scale study of high-strength low-thermal-conductivity cement composites containing cenospheres. Cement and Concrete Composites, 80, 91-103.
DOI: https://dx.doi.org/10.1016/j.cemconcomp.2017.03.002
P. Carrara, T. Wu, R. Kruse, L. De Lorenzis (2016), Towards multiscale modeling of the interaction between transport and fracture in concrete. RILEM Letters, 1: 94-101.
DOI: http://dx.doi.org/10.21809/rilemtechlett.2016.21
J. Kiendl, M. Ambati, L. De Lorenzis, H. Gomez, A. Reali (2016), Phase-field description of brittle fracture in plates and shells. Computer Methods in Applied Mechanics and Engineering 312: 374-394
DOI: http://dx.doi.org/10.1016/j.cma.2016.09.011
P. Carrara, L. De Lorenzis, D. Bentz (2016), Chloride diffusivity in hardened cement paste from microscale analyses and accounting for binding effects. Modeling and Simulation in Materials Science and Engineering, 24(6).
DOI: http://dx.doi.org/10.1088/0965-0393/24/6/065009
C. Maruccio, G. Quaranta, L. De Lorenzis, G. Monti (2016). Energy harvesting from electrospun piezoelectric nanofibers for structural health monitoring of a cable-stayed bridge. Smart Materials and Structures, 25(8).
DOI: http://dx.doi.org/10.1088/0964-1726/25/8/085040
H. Gomez, L. De Lorenzis (2016). The variational collocation method. Computer Methods in Applied Mechanics and Engineering, 309: 152-181.
DOI: http://dx.doi.org/10.1016/j.cma.2016.06.003
T. Wu, L. De Lorenzis (2016), A phase-field approach to fracture coupled with diffusion, Computer Methods in Applied Mechanics and Engineering, 312: 196-223
DOI: http://dx.doi.org/10.1016/j.cma.2016.05.024
M. Scaraggi., D. Comingio., A. Al-Qudsi., L. De Lorenzis (2016), The influence of geometrical and rheological non-linearity on the calculation of rubber friction, Tribology international, 101:402-413, September 2016, Elsevier.
DOI: http://dx.doi.org/10.1016/j.triboint.2016.04.027
L. De Lorenzis, A. McBride, B.D. Reddy (2016), Phase-field modelling of fracture in single crystal plasticity. GAMM Mitteilungen, 39(1): 7-34.
DOI: http://dx.doi.org/10.1002/gamm.201610002
P. Otto, J. Unger, L. De Lorenzis (2016). A regularized model for impact in explicit dynamics applied to the split Hopkinson pressure bar. Computational Mechanics, 58(4): 681-695.
DOI: http://dx.doi.org/10.1007/s00466-016-1311-1
M. Ambati, L. De Lorenzis (2016), Phase-field modeling of brittle and ductile fracture in shells with isogeometric NURBS-based solid-shell elements,Computer Methods in Applied Mechanics and Engineering, 312:351-373
DOI: http://dx.doi.org/10.1016/j.cma.2016.02.017.
T. Gerasimov, L. De Lorenzis (2016), A line search assisted monolithic approach for phase-field computing of brittle fracture, Computer Methods in Applied Mechanics and Engineering, 312: 276-303
DOI: http://dx.doi.org/10.1016/10.1016/j.cma.2015.12.017
M. Ambati, R. Kruse, L. De Lorenzis (2016), A phase-field model for ductile fracture at finite strains and its experimental verification, Computational Mechanics, 57: 149-167.
DOI: http://dx.doi.org/10.1007/s00466-015-1225-3
R. Dimitri, M. Trullo, L. De Lorenzis, G. Zavarise (2015). Coupled cohesive zone models for mixed-mode fracture: a comparative study. Engineering Fracture Mechanics, 148: 145-179.
DOI: http://dx.doi.org/10.1016/j.engfracmech.2015.09.029
P. Carrara, L. De Lorenzis, (2015), A Coupled Damage-Plasticity Model for the Cyclic Behavior of Shear-Loaded Interfaces, Journal of the Mechanics and Physics of Solids, 85: 33-53
DOI: http://dx.doi.org/10.1016/j.jmps.2015.09.002
R. Kruse, N. Nguyen-Thanh, L. De Lorenzis, T.J.R. Hughes (2015) Isogeometric collocation for large deformation elasticity and frictional contact problems, Computer Methods in Applied Mechanics and Engineering, 296: 72-112.
DOI: http://dx.doi.org/10.1016/j.cma.2015.07.022
J. Ma, S. Sahraee, P. Wriggers, F. Wang, L. De Lorenzis (2015). Stochastic multiscale homogenization analysis of heterogeneous materials under finite deformations with full uncertainty in the microstructure. Computational Mechanics, 55: 819-835.
DOI: http://dx.doi.org/10.1007/s00466-015-1136-3
C. Maruccio, L. De Lorenzis, L. Persano, D. Pisignano (2015). Computational homogenization of fibrous piezoelectric materials. Computational Mechanics, 55: 983-998.
DOI: http://dx.doi.org/10.1007/s00466-015-1147-0
M. Ambati, T. Gerasimov, L. De Lorenzis (2015) Phase-field modeling of ductile fracture,Computational Mechanics 55:1017-1040
DOI: http://dx.doi.org/10.1007/s00466-015-1151-4
M. Ambati, T. Gerasimov, L. De Lorenzis (2015), A review on phase-field models of brittle fracture and a new fast hybrid formulation, Computational Mechanics, 55: 383-405
DOI: http://dx.doi.org/10.1007/s00466-014-1109-y
P. Cornetti, M. Corrado, L. De Lorenzis, A. Carpinteri (2015). An analytical cohesive crack modeling approach to the edge debonding failure of FRP-plated beams, International Journal of Solids and Structures, 53: 92-106.
DOI: http://dx.doi.org/10.1016/j.ijsolstr.2014.10.017
N. Nguyen-Thanh, N. Valizadeh, M.N. Nguyen, H. Nguyen-Xuan, X. Zhuang, P. Areias, G. Zi, Y. Bazilevs, L. De Lorenzis, T. Rabczuk (2015). An extended isogeometric thin shell analysis based on Kirchhoff-Love theory. Computer Methods in Applied Mechanics and Engineering, 284: 265-291
DOI: http://dx.doi.org/10.1016/j.cma.2014.08.025
R. Sauer, L. De Lorenzis (2015). An unbiased computational contact formulation for 3D friction. International Journal for Numerical Methods in Engineering, 101(4): 251-280.
DOI: http://dx.doi.org/10.1002/nme.4794
L. De Lorenzis, J.A. Evans, T.J.R. Hughes, A. Reali (2015), Isogeometric collocation: Neumann boundary conditions and contact, Computer Methods in Applied Mechanics and Engineering, 284: 21-54
DOI: http://dx.doi.org/10.1016/j.cma.2014.06.037
P. Phung-Van, L. De Lorenzis, C. H. Thai, M. Abdel-Wahab, H. Nguyen-Xuan (2015), Analysis of laminated composite plates integrated with piezoelectric sensors and actuators using higher-order shear deformation theory and isogeometric finite elements, Computational Materials Science, 96B: 495-505
DOI: http://dx.doi.org/10.1016/j.commatsci.2014.04.068
L. De Lorenzis, F. Grancagnolo, A. L’Erario, A. Maffezzoli, A. Miccoli, S. Rella, M. Spedicato, G. Zavarise (2014). Analysis and characterization of the mechanical structure for the I-tracker of the Mu2e experiment. Nuclear Physics B, 248-250: 134-136.
DOI: http://dx.doi.org/10.1016/j.nuclphysbps.2014.02.027
L. Persano, C. Dagdeviren, C. Maruccio, L. De Lorenzis, D. Pisignano (2014). Cooperativity in the enhanced piezoelectric response of polymer nanowires. Advanced Materials, 26(45): 7574-7580.
DOI: http://dx.doi.org/10.1002/adma.201403169
C. Maruccio, L. De Lorenzis (2014). Numerical homogenization of piezoelectric textiles with electrospun fibers for energy harvesting. Fracture and Structural Integrity, 8(29):49-60.
DOI: http://dx.doi.org/10.3221/IGF-ESIS.29.06
R. Dimitri, M. Trullo, G. Zavarise, L. De Lorenzis (2014). A consistency assessment of coupled cohesive zone models for mixed-mode debonding problems. Fracture and Structural Integrity, 8(29):266-283.
DOI: http://dx.doi.org/10.3221/IGF-ESIS.29.23
V. Palmieri, L. De Lorenzis, (2014), Multiscale modeling of concrete and of the FRP-concrete interface, Engineering Fracture Mechanics, 131: 150-175
DOI: http://dx.doi.org/10.1016/j.engfracmech.2014.07.027
J. Ma, S. Zhang, P. Wriggers, W. Gao, L. De Lorenzis (2014). Stochastic homogenized effective properties of three-dimensional composite material with full randomness and correlation in the microstructure. Computers & Structures, 144: 62-74.
DOI: http://dx.doi.org/10.1016/j.compstruc.2014.06.003
L. De Lorenzis, P. Wriggers, T.J.R. Hughes (2014), Isogeometric contact: a review, GAMM Mitteilungen, 37(1): 85-123
DOI: http://dx.doi.org/10.1002/gamm.201410005
R. Dimitri, L. De Lorenzis, P. Wriggers, G. Zavarise (2014), NURBS- and T-spline-based isogeometric cohesive zone modeling of interface debonding, Computational Mechanics, 54: 369-388.
DOI: http://dx.doi.org/10.1007/s00466-014-0991-7
R. Dimitri, L. De Lorenzis, M.A. Scott, P. Wriggers, R.L. Taylor, G. Zavarise (2014), Isogeometric large deformation frictionless contact using T-splines , Computer Methods in Applied Mechanics and Engineering, 269: 394-414.
DOI: http://dx.doi.org/10.1016/j.cma.2013.11.002
Micelli F., De Lorenzis L. (2013), A study on flexural strengthening of RC beams with low concrete strength using near-surface mounted CFRP reinforcement, Proceeding of the Institution of Civil Engineers: Construction Materials, 166(5): 295-303.
DOI: http://dx.doi.org/10.1680/coma.11.00056
De Lorenzis L., Wriggers P. (2013), Computational homogenization of rubber friction on rough rigid surfaces, Computational Materials Science, 77: 264-280.
DOI: http://dx.doi.org/10.1016/j.commatsci.2013.04.049
De Lorenzis L., Fernando D., Teng J.G. (2013), Coupled mixed-mode cohesive zone modeling of interfacial debonding in plated beams, International Journal of Solids and Structures, 50: 2477-2494.
DOI: http://dx.doi.org/10.1016/j.ijsolstr.2013.03.035
Di Benedetto F., Fasano V., Persano L., Maruccio C., Mele E., Potente G., Weitz D.A., De Lorenzis L., Pisignano D. (2013), Rolling-particle soft lithography, Soft Matter, 9(7): 2206-2211.
DOI: http://dx.doi.org/10.1039/C2SM27327F
Sauer R., De Lorenzis L. (2013), A computational contact formulation based on surface potentials, Computer Methods in Applied Mechanics and Engineering, 253: 369-395.
DOI: http://dx.doi.org/10.1016/j.cma.2012.09.002
Assiro R., Cappelli L., Cascella M., De Lorenzis L., Grancagnolo F., Ignatov F., L’Erario A., Maffezzoli A., Miccoli A., Onorato G., Perillo M., Piacentino G., Rella S., Rossetti F., Spedicato M., Tassielli G., Zavarise G. (2012), Ultra-low mass drift chambers, Nuclear Instruments & Methods In Physics Research A , 718: 443-445.
DOI: http://dx.doi.org/10.1016/j.nima.2012.10.047
Zavarise G., De Lorenzis L. (2012), An augmented Lagrangian algorithm for contact mechanics based on linear regression, International Journal for Numerical Methods in Engineering, 91(8): 825-842.
DOI: http://dx.doi.org/10.1002/nme.4294
De Lorenzis L., Dimitri R., Ochsendorf J. (2012), Structural study of masonry buttresses: the stepped form, Structures and Buildings (Proceedings of the Institution of Structural Engineers), 165(9): 499-521.
DOI: http://dx.doi.org/10.1680/stbu.10.00043
De Lorenzis L., Dimitri R., Ochsendorf J. (2012), Structural study of masonry buttresses: the trapezoidal form, Structures and Buildings (Proceedings of the Institution of Structural Engineers), 165(9): 483-498.
DOI: http://dx.doi.org/10.1680/stbu.10.00042
De Lorenzis L. (2012), Some recent results and open issues on interface modeling in civil engineering structures, Materials and Structures, 45(4): 477-503.
DOI: http://dx.doi.org/10.1617/s11527-012-9830-5
Zavarise G., De Lorenzis L., Taylor R.L. (2012), A non-consistent start-up procedure for contact problems with large load-steps, Computer Methods in Applied Mechanics and Engineering, 205-208: 91-109.
DOI: http://dx.doi.org/10.1016/j.cma.2011.02.018
De Lorenzis L., Wriggers P., Zavarise G. (2012), A mortar formulation for 3D large deformation contact using NURBS-based isogeometric analysis and the augmented Lagrangian method, Computational Mechanics, 49(1): 1-20.
DOI: http://dx.doi.org/10.1007/s00466-011-0623-4
Dimitri R., De Lorenzis L., Zavarise G. (2011), Numerical study on the dynamic behavior of masonry columns and arches on buttresses with the discrete element method, Engineering Structures, 33(12): 3172-3188.
DOI: http://dx.doi.org/10.1016/j.engstruct.2011.08.018
De Lorenzis L., Temizer I., Wriggers P., Zavarise G. (2011), A large deformation frictional contact formulation using NURBS-based isogeometric analysis, International Journal for Numerical Methods in Engineering, 87(13): 1278-1300.
DOI: http://dx.doi.org/10.1002/nme.3159
De Lorenzis L., Zavarise G. (2010), Debonding analysis of thin plates from curved substrates, Engineering Fracture Mechanics, 77(16): 3310-3328.
DOI: http://dx.doi.org/10.1016/j.engfracmech.2010.08.013
De Lorenzis L., Paggi M., Carpinteri A., Zavarise G. (2010), Linear elastic fracture mechanics approach to plate end debonding in rectilinear and curved plated beams, Advances in Structural Engineering, 13(5): 875-889.
DOI: http://dx.doi.org/10.1260/1369-4332.13.5.875
Galati D., De Lorenzis L. (2009), Effect of construction details on the bond performance of NSM FRP bars in concrete, Advances in Structural Engineering, 12(5): 683-700.
DOI: http://dx.doi.org/10.1260/136943309789867836
De Lorenzis L., Zavarise G. (2009), Cohesive zone modeling of interfacial stresses in plated beams, International Journal of Solids and Structures, 46(24): 4181-4191.
DOI: http://dx.doi.org/10.1016/j.ijsolstr.2009.08.010
Zavarise G., De Lorenzis L. (2009), The node-to-segment algorithm for 2D frictionless contact: classical formulation and special cases, Computer Methods in Applied Mechanics and Engineering, 198(41-44): 3428-3451.
DOI: http://dx.doi.org/10.1016/j.cma.2009.06.022
Zavarise G., De Lorenzis L. (2009), A modified node-to-segment algorithm passing the contact patch test, International Journal for Numerical Methods in Engineering, 79(4): 379-416.
DOI: http://dx.doi.org/10.1002/nme.2559
De Lorenzis L., Zavarise G. (2009), Interfacial stress analysis and prediction of debonding for a thin plate bonded to a curved substrate, International Journal of Non-Linear Mechanics, 44(4): 358-370.
DOI: http://dx.doi.org/10.1016/j.ijnonlinmec.2009.01.002
Wang B., Teng J.G., De Lorenzis L., Zhou L.M., Ou J., Jin W., Lau K.T. (2009), Strain monitoring of RC members strengthened with smart NSM FRP bars, Construction and Building Materials, Elsevier, 23(4): 1698-1711.
DOI: http://dx.doi.org/10.1016/j.conbuildmat.2008.07.027
Rizzo A., De Lorenzis L. (2009), Modeling of debonding failure for RC beams strengthened in shear with NSM FRP reinforcement, Construction and Building Materials, Elsevier, 23(4): 1568-1577.
DOI: http://dx.doi.org/10.1016/j.conbuildmat.2008.03.009
Rizzo A., De Lorenzis L. (2009), Behavior and capacity of RC beams strengthened in shear with NSM FRP reinforcement, Construction and Building Materials, Elsevier, 23(4): 1555-1567.
DOI: http://dx.doi.org/10.1016/j.conbuildmat.2007.08.014
Ochsendorf J., De Lorenzis L. (2008), Failure of rectangular masonry buttresses under concentrated loading, Structures and Buildings (Proceedings of the Institution of Structural Engineers), 161(5): 265-275.
DOI: http://dx.doi.org/10.1680/stbu.2008.161.5.265
DeJong M., De Lorenzis L., Adams, S., Ochsendorf, J. (2008), Rocking stability of masonry arches in seismic regions, Earthquake Spectra, 24(4): 847–865.
DOI: http://dx.doi.org/10.1193/1.2985763
De Lorenzis L., Zavarise G. (2008), Modeling of mixed-mode debonding in the peel test applied to superficial reinforcements, International Journal of Solids and Structures, Elsevier, 45(20): 5419-5436.
DOI: http://dx.doi.org/10.1016/j.ijsolstr.2008.05.024
Valdmanis V., De Lorenzis L., Rousakis T., Tepfers R. (2007), Behaviour and capacity of CFRP–confined concrete cylinders subjected to monotonic and cyclic axial compressive load, Structural Concrete (fib Journal), Thomas Telford, 8(4): 187-200.
DOI: http://dx.doi.org/10.1680/stco.2007.8.4.187
De Lorenzis L., DeJong M., Ochsendorf J. (2007), Failure of masonry arches under impulse base motion, Earthquake Engineering and Structural Dynamics, 36(14): 2119-2136.
DOI: http://dx.doi.org/10.1002/eqe.719
Zou X.K., Teng J.G., De Lorenzis L., Xia S.H. (2007), Optimal performance-based design of FRP jackets for seismic retrofit of reinforced concrete frames, Composites Part B: Engineering, Elsevier, 38(5-6): 584-597.
DOI: http://dx.doi.org/10.1016/j.compositesb.2006.07.016
De Lorenzis L., Dimitri R., La Tegola A. (2007), Reduction of the lateral thrust of masonry arches and vaults with FRP composites, Construction and Building Materials, Elsevier, 21(7): 1415-1430.
DOI: http://dx.doi.org/10.1016/j.conbuildmat.2006.07.009
De Lorenzis L., Teng J.G. (2007), Near-surface mounted FRP reinforcement: an emerging technique for strengthening structures, Composites Part B: Engineering, Elsevier, 38(2): 119-143.
DOI: http://dx.doi.org/10.1016/j.compositesb.2006.08.003
De Lorenzis L., Teng J.G., Zhang L. (2006), Interfacial stresses in curved members bonded with a thin plate, International Journal of Solids and Structures, Elsevier, 43(25-26): 7501-7517.
DOI: http://dx.doi.org/10.1016/j.ijsolstr.2006.03.014
Teng J.G., De Lorenzis L., Wang B., Li R., Wong T.N., Lam L. (2006), Debonding failures of RC beams strengthened with near surface mounted CFRP strips, Journal of Composites for Construction, American Society of Civil Engineers, 10(2): 92-105.
DOI: http://dx.doi.org/10.1061/(ASCE)1090-0268(2006)10:2(92)
De Lorenzis L., La Tegola A. (2005), Effect of the actual distribution of applied stresses on global buckling of isotropic and transversely isotropic thin-walled members: numerical examples, Composite Structures, Elsevier, 71(1): 83-100.
DOI: http://dx.doi.org/10.1016/j.compstruct.2004.09.022
De Lorenzis L., Scialpi V., La Tegola A. (2005), Analytical and experimental study on bonded-in CFRP bars in glulam timber, Composites Part B: Engineering, Elsevier, 36(4): 279-289.
DOI: http://dx.doi.org/10.1016/j.compositesb.2004.11.005
De Lorenzis L., La Tegola A. (2005), Effect of the actual distribution of applied stresses on global buckling of isotropic and transversely isotropic thin-walled members: theoretical analysis, Composite Structures, Elsevier, 68(3): 339-348.
DOI: http://dx.doi.org/10.1016/j.compstruct.2004.03.027
Micelli F., De Lorenzis L., La Tegola A. (2004), FRP-confined masonry columns under axial loads: experimental results and analytical model, Masonry International, 17(3): 95-108. <
http://www.masonry.org.uk/index.php/masonry/publications/masonry_international/masonry_international_papers/volume_17/frp_confined_masonry_columns_under_axial_loads_experimental_results_and_analytical_model
De Lorenzis L. (2004), Anchorage length of near-surface mounted fiber-reinforced polymer bars for concrete strengthening – Analytical modeling, ACI Structural Journal, American Concrete Institute, 101(3): 375-386.
https://www.concrete.org/publications/internationalconcreteabstractsportal/m/details/id/13097
De Lorenzis L., Lundgren K., Rizzo A. (2004), Anchorage length of near-surface mounted fiber-reinforced polymer bars for concrete strengthening – Experimental investigation and numerical modeling, ACI Structural Journal, American Concrete Institute, 101(2): 269-278.
https://www.concrete.org/publications/internationalconcreteabstractsportal.aspx?m=details&ID=13025
De Lorenzis L., Galati D., La Tegola A. (2004), Stiffness and ductility of fibre-reinforced polymer-strengthened reinforced concrete members, Structures and Buildings (Proceedings of the Institution of Structural Engineers), 157(1): 31-51.
DOI: http://dx.doi.org/10.1680/stbu.2004.157.1.31
Tepfers R., De Lorenzis L. (2003), Bond of FRP reinforcement in concrete: a challenge, Mechanics of Composite Materials, 39(4): 315-328.
DOI: http://dx.doi.org/10.1023/A:1025642411103
De Lorenzis L., Tepfers R. (2003), Comparative study of models on confinement of concrete cylinders with fiber-reinforced polymer composites, Journal of Composites for Construction, American Society of Civil Engineers, 7(3): 219-237.
DOI: http://dx.doi.org/10.1061/(ASCE)1090-0268(2003)7:3(219)
De Lorenzis L., Micelli F., La Tegola A. (2003), Fiber-reinforced polymer for structural strengthening: post-tensioning of steel silos, Structural Engineering International, IABSE, 13(2): 124-127
DOI: http://dx.doi.org/10.2749/101686603777964766
De Lorenzis L., La Tegola A. (2003), Static behavior of pultruded fiber-reinforced polymer thin-walled beams, Composite Structures, Elsevier, 60(3): 231-244.
DOI: http://dx.doi.org/10.1016/S0263-8223(03)00017-5
De Lorenzis L., Rizzo A., La Tegola A. (2002), A modified pull-out test for bond of near-surface mounted FRP rods in concrete, Composites Part B: Engineering, Elsevier, 33(8): 589-603.
DOI: http://dx.doi.org/10.1016/S1359-8368(02)00052-5
De Lorenzis L., Nanni A. (2002), Bond between near-surface mounted fiber-reinforced polymer rods and concrete in structural strengthening, ACI Structural Journal, American Concrete Institute, 99(2): 123-132.
https://www.concrete.org/publications/internationalconcreteabstractsportal/m/details/id/11534
De Lorenzis L., Miller B., Nanni A. (2001), Bond of fiber-reinforced polymer laminates to concrete, ACI Materials Journal, American Concrete Institute, 98(3): 256-264.
https://www.concrete.org/publications/internationalconcreteabstractsportal.aspx?m=details&ID=10281
De Lorenzis L., Nanni A. (2001), Characterization of FRP rods as near-surface mounted reinforcement, Journal of Composites for Construction, American Society of Civil Engineers, 5(2): 114-121.
DOI: http://dx.doi.org/10.1061/(ASCE)1090-0268(2001)5:2(114)
De Lorenzis L., Nanni A. (2001), Shear strengthening of reinforced concrete beams with near-surface mounted fiber-reinforced polymer rods, ACI Structural Journal, American Concrete Institute, 98(1): 60-68.
https://www.concrete.org/publications/internationalconcreteabstractsportal.aspx?m=details&ID=10147
Education |
|
2002 |
Ph.D. in Civil Engineering, Università di Lecce, Italy |
2000 |
M.Sc. in Civil Engineering, University of Missouri-Rolla, USA |
1998 |
5-years degree (Laurea) in Materials Engineering, option Civil Engineering, Università di Lecce, Italy |
Professional experience |
|
2016 |
Offer of the Professorship for Statics and Dynamics of Aerospace Structures, University of Stuttgart |
Since 2013 |
Professor and Director of the Institute of Applied Mechanics, Technische Universität Braunschweig, Germany |
2015 |
Visiting scholar, CERECAM, University of Cape Town (2 weeks) |
2012, 2014 |
Visiting scholar, ICES, University of Texas at Austin, USA (6 weeks in total) |
2011 |
Associate Professor of Solid and Structural Mechanics, Università del Salento, Italy |
2010, 2011 |
Alexander von Humboldt Scholar, Leibniz Universität Hannover, Germany (1 year in total) |
2008 |
Assistant Professor of Solid and Structural Mechanics, Università del Salento, Italy |
2006 |
Fulbright scholar, Massachusetts Institute of Technology, Cambridge, USA (6 months) |
2005 |
Research fellow, Hong Kong Polytechnic University, China (2 months) |
2001 |
Visiting scholar, Chalmers University of Technology, Gothenburg, Sweden (4 months) |
2000 |
Assistant Professor of Structural Engineering, Università di Lecce, Italy |
1999 |
Graduate Research Assistant, Center for Infrastructure Engineering Studies, University of Missouri-Rolla, USA (12 months) |
Awards and Honours |
|
2015 |
Student teaching prize LehrLEO, Technische Mechanik 1, WS 2014/2015 |
2014 |
Best Paper Award, P. Carrara and L. De Lorenzis, Int. Conference FRPRCS7, Vancouver, Canada. |
2012 |
IIFC Distinguished Young Researcher Award |
2011 |
AIMETA Junior Prize |
2011 |
ERC Starting Independent Researcher Grant |
2011 |
RILEM Robert L’Hermite Medal |
2009 |
Prize of Scientific Excellence, Università del Salento |
2006 |
Elected member of the Council, International Institute for FRP in Construction |
2003 |
Honorable Mention Applied Research Paper, Journal of Composites for Construction |
1992 |
Designated “Alfiere del lavoro” from the President of the Italian Republic |
Editorial Activities |
|
Since 03/2016 |
Deputy Editor-in-Chief, Materials and Structures, Springer |
2014 |
Guest Editor, GAMM Mitteilungen (with P. Wriggers) |
Since 2013 |
Editorial Board, Advances in Structural Engineering, Multi-Science |
Since 2012 |
Assistant Editor, Computational Mechanics, Springer |
Since 2011 |
Associate Editor, Materials and Structures, Springer |
Since 2011 |
Associate Editor, Journal of Materials in Civil Engineering, ASCE |
2007-2010 |
Associate Regional Editor for Europe, FRP International |
2006 |
Guest Editor, Journal of Materials in Civil Engineering, ASCE, 18(5) |
Since 2006 |
Editorial Board, Journal of Composites for Construction, ASCE |